journal article·2016-12

Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants

M.T. de Miguel, V. Encinas-Sánchez, M.I. Lasanta, G. García-Martín, F.J. Pérez

Publisher page

Abstract

Abstract This paper studies the behaviour of austenitic steel HR3C in a eutectic ternary Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 molten salt mixture through an isothermal immersion test at 700 °C for 2000 h. To this aim various techniques were used in order to examine the effects of long-term, high-temperature corrosion processes on the selected substrate. It was found that the corrosion products were arranged in a multilayer structure, with LiFeO 2 , LiCrO 2 , NiO and FeCr 2 O 4 being the main compounds in the different layers. The composition of the remaining salt after the corrosion tests was also studied, the chromium increase being one of the main points to highlight. The results suggested that longer immersion tests should be carried out to clearly confirm the suitability of HR3C for solar thermal applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
2. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
3. Corrosion effects between molten salts and thermal storage material for concentrated solar power plants10.1016/j.apenergy.2011.12.057 ↗
4. Molten-salt power towers: newly commercial concentrating solar storage10.1109/JPROC.2011.2163739 ↗
5. LiNO3–NaNO3–KNO3 salt for thermal energy storage: thermal stability evaluation in different atmospheres10.1016/j.tca.2013.02.029 ↗
6. Effect of heating rates and composition on the thermal decomposition of nitrate based molten salts10.1016/j.egypro.2015.03.075 ↗
7. Corrosion testing device for in-situ corrosion characterization in operational molten salts storage tanks: A516 gr70 carbon steel performance under molten salts exposure10.1016/j.solmat.2016.06.005 ↗
8. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
9. Optimal concentration of alumina nanoparticles in molten Hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
10. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
11. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
12. Molten salts database for energy applications10.1016/j.cep.2013.07.008 ↗
13. Design of new molten salt thermal energy storage material for solar thermal power plant10.1016/j.apenergy.2012.10.048 ↗
14. Thermal property characterization of a low melting temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
15. A new ternary chloride eutectic mixture and its thermo-physical properties for solar thermal energy storage10.1016/j.egypro.2014.11.1089 ↗
16. Experimental study on optimized composition of mixed carbonate for phase change thermal storage in solar thermal power plant10.1007/s10973-011-1364-5 ↗
17. The thermal stability of molten lithium-sodium-potassium carbonate and the influence of additives on the melting point10.1115/1.4006895 ↗
18. Corrosion properties of a ternary nitrate/nitrite molten salt in concentrated solar technology10.1016/j.renene.2015.01.072 ↗
19. Corrosion in molten nitrate–nitrite salts10.1007/BF03259692 ↗
20. Corrosion resistance of Hastelloys in molten metal-chloride heat-transfer fluids for concentrating solar power applications10.1016/j.solener.2014.02.002 ↗
21. Corrosion of nickel-containing alloys in molten LiCl–KCl medium10.5006/0627 ↗
22. Electrochemical impedance spectroscopy investigation of alloy Inconel-718 in molten salts at high temperature10.1016/S1452-3981(23)15005-X ↗
23. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
24. Corrosion behaviour of stainless steels and a single crystal superalloy in a ternary LiCl–KCl–CsCl molten salt10.1016/j.corsci.2014.09.009 ↗
25. Materials for ultra supercritical coal power plants – boiler materials: part 110.1361/105994901770345394 ↗
26. Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels10.1016/j.msea.2011.04.057 ↗
27. Impacts of applied stresses on high temperature corrosion behavior of HR3C in molten salt10.1007/s11085-014-9522-3 ↗
28. G. Selvduray, The Properties of And Analytical Methods for Detection of LiOH and Li2CO3, University San Jose, 1991
29. Thermal and carbothermic decomposition of Na2CO3 and Li2CO3
30. Solar towers with supercritical steam parameters – is the efficiency gain worth the effort?10.1016/j.egypro.2015.03.181 ↗
31. Fluidized-bed technology enabling the integration of high temperature solar receiver CSP systems with steam and advanced power cycles10.1016/j.egypro.2015.03.126 ↗
32. Dynamic analysis of concentrated solar supercritical CO2-based power generation closed-loop cycle10.1016/j.applthermaleng.2015.10.039 ↗
33. The corrosion behaviour of iron and chromium in molten (Li0.62K0.38)2CO310.1016/S0013-4686(97)10191-8 ↗
34. High temperature corrosion of low and high alloy steels under molten carbonate fuel cell conditions10.1002/maco.19970480803 ↗
35. Corrosion phenomena of alloys and electrode materials in molten carbonate fuel cells10.1002/(SICI)1521-4176(200005)51:5<287::AID-MACO287>3.0.CO;2-8 ↗
36. Stability of Iron and Nickel Base Alloys in MCFC
37. Lee · 1985 · III
38. The corrosion behavior of Fe–Cr alloys containing Co, Mn, and/or Ni and of a Co-base alloy in the presence of molten (Li,K)-carbonate10.1002/maco.19970481103 ↗
39. Corrosion of iron base alloys and high alloy steels in the Li2CO3–K2CO3 eutectic mixture10.1016/S0010-938X(97)00020-6 ↗
40. Garche · 2009 · 2 · 464
41. Estudio de la corrosión de diferentes aleaciones en sales de carbonatos fundidos con la técnica de espectroscopía de impedancia electroquímica10.3989/cyv.2000.v39.i3.849 ↗
42. Corrosion and passivation behaviors of some stainless steel alloys in molten alkali carbonates10.1016/S0013-4686(02)00506-6 ↗
43. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600°C10.1016/j.solmat.2015.08.011 ↗
44. Corrosion behaviour of some stainless steel alloys in molten alkali carbonates (I)10.1023/A:1017954720772 ↗
45. Hot-corrosion studies of separator plates of AISI-310 stainless steel in molten-carbonate fuel cells10.1023/A:1004501606718 ↗
46. Solubilities of LiFeO2 and (Li,K)2CrO4 in molten alkali carbonates at 650°C10.1149/1.2100840 ↗