journal article·2017-02

Photovoltaic performance of c-Si wafer reclaimed from end-of-life solar cell using various mixing ratios of HF and HNO3

Jun-Kyu Lee, Jin-Seok Lee, Young-Soo Ahn, Gi-Hwan Kang, Hee-Eun Song, Jeong-In Lee, Min-Gu Kang, Churl-Hee Cho

Publisher page

Abstract

Abstract This study presents the re-fabrication of a crystalline silicon (c-Si) solar cell using a Si wafer reclaimed from the solar cell of an end-of-life (EoL) module, and an evaluation of its performance. A 6-in. commercial solar cell was used in the etching process by wet chemical process in order to investigate the optimal mixing ratio of a mixture of HNO 3 and HF. The silicon nitride (SiN x ) and aluminum (Al) back contact on both sides of the solar cell were not completely removed at a high ratio of aqueous HNO 3 , and the precipitation of Ag particles on the surface of Si wafer were deposited at a high ratio of aqueous HF in a mixed acid solution. The optimum etching condition for the recovery of the c-Si wafer was applied to the EoL module, which consisted of 4″ solar cells. The photovoltaic (PV) performance of the re-fabricated 4″ solar cell was measured by conventional solar cell processing, which shows the best results reported so far. The higher boron (B) concentration and reflectance of the re-fabricated solar cell reduced cell efficiency by 0.6% compared with the commercial 6″ solar cell. However, it has sufficient potential for use in the PV industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic Systems and Sustainability · Silicon and Solar Cell Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Experimental investigations for recycling of silicon and glass from waste photovoltaic modules10.1016/j.renene.2012.04.030 ↗
2. IEA. PVPS, 2014 A Snapshot of Global PV Markets 2014. Rep. IEA PVPS T1-26, 2015
3. Characterization of defects in mono-like silicon for photovoltaic applications using X-ray Bragg diffraction imaging10.1107/S1600576715004926 ↗
4. IEA. PVPS, Review of Failures of Photovoltaic Modules. Rep. IEA-PVPS T13-01, 2014
5. End-of-life management and recycling of PV modules10.1016/S0301-4215(00)00091-4 ↗
6. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
7. Producer responsibility and recycling solar photovoltaic modules10.1016/j.enpol.2010.07.023 ↗
8. Recovering valuable metals from recycled photovoltaic modules10.1080/10962247.2014.891540 ↗
9. Socio-economic and environmental impacts of silicon based photovoltaic (PV) technologies10.1016/j.egypro.2013.05.073 ↗
10. C.Olson, B.Geerligs, M.Goris, I.Bennett, J.Clyncke, Current and future priorities for mass and material in silicon pv module recycling, in: Proceedings of 28th EU PVSEC, 30, 2013 pp. 4629-4633,.
11. Resource recovery of scrap silicon solar battery cell10.1177/0734242X13479433 ↗
12. The Status and Trends of Crystalline Silicon PV Module Recycling Treatment Methods in Europe and China
13. Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE)
14. Recycling of photovoltaic panels by physical operations10.1016/j.solmat.2014.01.012 ↗
15. J.S.Lee, Y.S.Ahn, B.Y.Jang, J.S.Kim, G.H.Kang, Disassembling photovoltaic module, US Granted Patent No. 9455367 B2
16. Experimental validation of crystalline silicon solar cells recycling by thermal and chemical methods10.1016/j.solmat.2010.07.025 ↗
17. Chemical treatment of crystalline silicon solar cells as a method of recovering pure silicon from photovoltaic modules10.1016/j.renene.2009.11.031 ↗
18. Wet etching processes for recycling crystalline silicon solar cells from end-of-life photovoltaic modules10.1039/C4RA03895A ↗
19. Chemical, thermal and laser processes in recycling of photovoltaic silicon solar cells and modules
20. Studies on aluminium corrosion during and after HF vapour treatment10.1016/j.mee.2009.07.005 ↗
21. Kinetics of silver dissolution in nitric acid from Ag-Au0.04-Cu0.10 and Ag-Cu0.23 scraps
22. Study on the mechanism of silicon etching in HNO3-Rich HF/HNO3 mixtures10.1021/jp066348j ↗
23. The dual role of silver during silicon etching in HF solution10.1186/1556-276X-7-455 ↗
24. Study of the electroless silver seed formation on silicon surface10.1002/cjoc.200790042 ↗
25. Mechanism of metallic particle growth and metal-induced pitting on Si wafer surface in wet chemical processing10.1149/1.2059240 ↗
26. Influence of wafer thickness on the performance of multicrystalline Si solar cells: an experimental study10.1002/pip.421 ↗
27. Short circuit current isc as a real non-destructive diagnostic tool of a photovoltaic modules performance
28. p-n junction photocurrent modelling evaluation under optical and electrical excitation10.3390/s40500058 ↗
29. S.M. Iftiquar, Y. Lee, M. Ju, N. Balaji, S.K. Dhungel, J. Yi, Fabrication of Crystalline Silicon Solar Cell with Emitter Diffusion, SiNx Surface Passivation and Screen Printing of Electrode. Intech Open Access Publisher, 2012, pp. 105–13210.5772/51065 ↗
30. Short-circuit current density mapping for solar cells10.1016/j.solmat.2013.09.019 ↗
31. Boron implanted emitter for n-type silicon solar cell10.1088/1674-1056/24/3/038801 ↗
32. Fundamental boron–oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
33. The effect of doping density and injection level on minority-carrier lifetime as applied to bifacial dendritic web silicon solar cells10.1109/16.2417 ↗
34. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
35. Recombination in compensated crystalline silicon for solar cells10.1063/1.3555588 ↗
36. Comparative study of carrier lifetime dependence on dopant concentration in silicon and germanium10.1149/1.2429031 ↗