journal article·2021-10

Multi-objective optimization and energy/exergy analysis of a ternary nanofluid based parabolic trough solar collector integrated with kalina cycle

Humphrey Adun, Michael Adedeji, Victor Adebayo, Ali Shefik, Olusola Bamisile, Doga Kavaz, Mustafa Dagbasi

Publisher page

Abstract

Abstract The utilization of solar thermal collectors has increased significantly in the last decade. The heat transfer fluids that is used in the design of these systems has notable effects on their performance. The recent discoveries of hybridized nanofluids, give a promising approach for investigating the performance of parabolic trough collectors (PTC), especially at different design conditions and environmental parameters. This study investigates the thermodynamic performance of a Kalina cycle incorporated with a parabolic trough collector that utilizes ternary nanofluid as a heat transfer fluid. The use of mono, hybrid and ternary nanofluids (THNF) in the parabolic trough collector is examined based on their impact on the efficiency of thermal system. The nanofluids considered are Al2O3, Al2O3–Fe, Al2O3–ZnO, and CuO–MgO–TiO2. The performance of integrated cycle based on the effect of solar irradiation and volume fraction of the nanofluids are studied and compared with conventional fluids namely: thermal VP1 oil, DowThermal oil, and Salt (7NaNO3, 40NaNO2, 53KNO2). In addition, an optimization study is conducted using genetic algorithm to maximize the net power output of the Kalina cycle and the exergetic efficiency of overall system. The results showed that performance of the system which uses nanofluids as a working fluid was higher than the systems using conventional fluids. Furthermore, the results demonstrate that maximum net power output of the system is recorded when Al2O3, Al2O3–Fe, Al2O3–ZnO, and CuO–MgO–TiO2 nanoparticles are used. The power outputs were evaluated as 59.72 kW, 56.64 kW, 54.54 kW, and 61.21 kW respectively. The optimization study reveals that the optimum exergetic efficiency when Al2O3, Al2O3–Fe, Al2O3–ZnO, and CuO–MgO–TiO2 nanofluids are used can reach up to 21.0%, 17.2%, 10.8%, and 25.1% respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Nanofluid Flow and Heat Transfer · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. The nexus of climate change and increasing demand for energy: a policy deliberation from the Canadian context
2. Impact of economic development on CO2 emission in Africa; the role of BEVs and hydrogen production in renewable energy integration10.1016/j.ijhydene.2020.10.134 ↗
3. Water/MWCNT nanofluid based cooling system of PVT: experimental and numerical research10.1016/j.renene.2018.01.014 ↗
4. On recent advances in PV output power forecast10.1016/j.solener.2016.06.073 ↗
5. Sa · 2013
6. A comparative study between parabolic trough collector and linear Fresnel reflector technologies10.1016/j.egypro.2011.05.065 ↗
7. Nanofluid thermal performance inside an absorber tube of LFR unit equipped with helical T-shape tape10.1016/j.molliq.2020.115202 ↗
8. Comparing the performance of passive and active double and single slope solar stills incorporated with parabolic trough collector via energy, exergy and productivity10.1016/j.renene.2019.10.050 ↗
9. Exergetic analysis and performance evaluation of parabolic trough concentrating solar thermal power plant (PTCSTPP)10.1016/j.energy.2012.01.023 ↗
10. Energetic end exergetic performance of a parabolic trough collector receiver: an experimental study10.1016/j.jclepro.2017.10.012 ↗
11. Exergy analysis of parabolic trough solar receiver10.1016/j.applthermaleng.2014.03.053 ↗
12. Analysis of nanofluids behavior in a PV-Thermal-Driven organic rankine cycle with cooling capability10.3390/asi3010012 ↗
13. Transient model and characteristics of parabolic-trough solar collectors: molten salt vs. synthetic oil10.1016/j.solener.2019.02.047 ↗
14. Solar thermodynamic plants for cogenerative industrial applications in southern Europe
15. State-of-the-art heat transfer fluids for parabolic trough collector10.1016/j.ijheatmasstransfer.2020.119541 ↗
16. Exergy analysis of parabolic trough solar collectors integrated with combined steam and organic Rankine cycles10.1016/j.enconman.2013.10.013 ↗
17. A detailed exergetic analysis of parabolic trough collectors10.1016/j.enconman.2017.07.035 ↗
18. Investigation of solar parabolic trough power plants with and without integrated TES (thermal energy storage) and FBS (fuel backup system) using thermic oil and solar salt10.1016/j.energy.2015.05.038 ↗
19. A detailed working fluid investigation for solar parabolic trough collectors10.1016/j.applthermaleng.2016.11.201 ↗
20. Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow10.1016/j.ijheatmasstransfer.2004.09.038 ↗
21. Thermal, hydraulic and exergetic evaluation of a parabolic trough collector operating with thermal oil and molten salt based nanofluids10.1016/j.enconman.2017.11.051 ↗
22. Parabolic Trough system operating with nanofluids: comparison with the conventional working fluids and influence on the system performance10.1016/j.egypro.2016.11.099 ↗
23. Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube10.1016/j.renene.2016.03.062 ↗
24. Analyzing entropy and thermal behavior of nanomaterial through solar collector involving new tapes10.1016/j.icheatmasstransfer.2021.105190 ↗
25. Optical and thermal analysis of a parabolic trough solar collector for production of thermal energy in different climates in Iran with comparison between the conventional nanofluids10.1016/j.jclepro.2017.12.080 ↗
26. Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: a review10.1016/j.jclepro.2021.126119 ↗
27. Thermodynamic analysis and optimization of an integrated Rankine power cycle and nano-fluid based parabolic trough solar collector10.1016/j.enconman.2016.05.029 ↗
28. Parametric analysis and optimization of an Organic Rankine Cycle with nanofluid based solar parabolic trough collectors10.1016/j.renene.2017.06.055 ↗
29. “A new correlation for predicting the thermal conductivity of ZnO–Ag (50%–50%)/water hybrid nanofluid: an experimental study10.1016/j.powtec.2017.10.025 ↗
30. Thermal conductivity of hybrid nanofluids: a critical review10.1016/j.ijheatmasstransfer.2018.05.021 ↗
31. A review on preparation methods, stability and applications of hybrid nanofluids10.1016/j.rser.2017.05.221 ↗
32. Effect of hybrid nanofluid on heat transfer performance of parabolic trough solar collector receiver
33. Performance analysis of direct absorption-based parabolic trough solar collector using hybrid nanofluids10.1007/s40430-020-02654-2 ↗
34. Thermal analysis of parabolic trough collector operating with mono and hybrid nanofluids10.1016/j.seta.2017.10.005 ↗
35. Exergy and energy amelioration for parabolic trough collector using mono and hybrid nanofluids10.1007/s10973-020-09371-x ↗
36. Experimental study on stability and rheological behaviour of hybrid Al2O3-TiO2 Therminol-55 nanofluids for concentrating solar collectors10.1016/j.powtec.2019.04.060 ↗
37. An intelligent approach to predicting the effect of nanoparticle mixture ratio, concentration and temperature on thermal conductivity of hybrid nanofluids10.1007/s10973-020-09594-y ↗
38. Exergetic and economic comparison of ORC and Kalina cycle for low temperature enhanced geothermal system in Brazil10.1016/j.applthermaleng.2012.11.012 ↗
39. Heat recovery from Diesel engines: a thermodynamic comparison between Kalina and ORC cycles10.1016/j.applthermaleng.2009.08.006 ↗
40. Thermodynamic evaluation and optimization of a flat plate collector operating with alumina and iron mono and hybrid nanofluids10.1016/j.seta.2020.100636 ↗
41. An experimental investigation into the effect of particle mixture ratio on specific heat capacity and dynamic viscosity of Al2O3-ZnO hybrid nanofluids10.1016/j.powtec.2020.01.015 ↗
42. Effects of temperature and particles volume concentration on the thermophysical properties and the rheological behavior of CuO/MgO/TiO2 aqueous ternary hybrid nanofluid: experimental investigation10.1007/s10973-019-08006-0 ↗
43. Effect of hybrid nanofluids mixture ratio on the performance of a photovoltaic thermal collector10.1002/er.5619 ↗
44. VL · 2009
45. Thermodynamic evaluation and optimization of a flat plate collector operating with alumina and iron mono and hybrid nanofluids10.1016/j.seta.2020.100636 ↗
46. Petela · 2013
47. “Modelling and performance analysis of an innovative CPVT , wind and biogas integrated comprehensive energy system : an energy and exergy approach10.1016/j.enconman.2020.112611 ↗
48. Energy, exergy and exergo-environmental assessment of a novel solar powered Kalina cycle incorporated with micro-CCHP for poly-generation10.1504/IJEX.2020.111687 ↗
49. A novel parabolic trough solar collector model - validation with experimental data and comparison to Engineering Equation Solver (EES)10.1016/j.enconman.2015.09.045 ↗
50. Comparative study of two novel micro-CCHP systems based on organic Rankine cycle and Kalina cycle10.1016/j.enconman.2019.01.003 ↗
51. Exergoeconomic evaluation and optimization of a novel combined augmented Kalina cycle/gas turbine-modular helium reactor10.1016/j.applthermaleng.2016.08.011 ↗
52. Bejan · 1996
53. “Entropy generation minimization in a Parabolic Trough collector operating with SiO2–water nanofluids using the genetic algorithm and artificial neural network10.1115/1.4044755 ↗
54. Dudley · 1994
55. Comparative analysis of a bottoming transcritical ORC and a Kalina cycle for engine exhaust heat recovery10.1016/j.enconman.2014.10.029 ↗
56. An experimental study on thermal conductivity of F-MWCNTs-Fe3O4/EG hybrid nanofluid: effects of temperature and concentration10.1016/j.icheatmasstransfer.2016.05.029 ↗
57. Thermophysical properties of CNT and CNT/Al2O3 hybrid nanofluid10.1049/mnl.2017.0029 ↗
58. A comprehensive experimental investigation of thermal conductivity of a ternary hybrid nanofluid containing MWCNTs- titania-zinc oxide/water-ethylene glycol (80:20) as well as binary and mono nanofluids10.1016/j.synthmet.2020.116501 ↗
59. Numerical analysis of heat transfer enhancement in a parabolic trough collector based on geometry modifications and working fluid usage
60. Performance assessment of parabolic dish and parabolic trough solar thermal power plant using nanofluids and molten salts10.1002/er.3479 ↗