journal article·2018-01

Design, fabrication and optical characterizations of large-area lithography-free ultrathin multilayer selective solar coatings with excellent thermal stability in air

Hao Wang, Hassan Alshehri, Hang Su, Liping Wang

Publisher page

Abstract

Abstract A sub-micron-thick selective multilayer solar thermal absorber made of tungsten, SiO 2 and Si 3 N 4 multilayer thin films was theoretically designed and experimentally demonstrated in this work. The optical performance was optimized by the particle swarm optimization algorithm for this multilayer absorber, whose spectral selectivity is associated with the Fabry-Perot resonance and anti-reflection effects. The designed multilayer absorber was deposited by sputtering and chemical vapor deposition techniques on the wafer scale. Its spectral absorptance characterized by a Fourier Transform Infrared spectrometer (FTIR) was demonstrated to be greater than 0.95 in the solar spectrum and less than 0.1 emittance in the mid-infrared with angular insensitivity. Temperature dependent FTIR measurements with an optical fiber setup revealed stable optical performance up to 600 °C in ambient, while thermal cycle testing showed its long-term thermal stability at 400 °C. Theoretical analysis of solar to power efficiency for a Carnot heat engine driven by the Solar heat was performed, which clearly shows that the proposed ultrathin selective multilayer absorber with spectral selectivity, angular insensitivity as well as high temperature stability could significantly boost the conversion efficiency of solar thermal systems at mid to high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Micro and nanostructured surfaces for selective solar absorption10.1002/adom.201500063 ↗
2. Black chrome solar selective coatings optimized for high temperature applications10.1016/0165-1633(82)90081-8 ↗
3. Spectral reflectance properties of black chrome for use as a solar selective coating10.1016/0038-092X(75)90067-5 ↗
4. Optical modeling and aging characteristics of thermally stable black chrome solar selective coatings10.1016/0165-1633(84)90034-0 ↗
5. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
6. Self-assembled nanostructured composites for solar absorber10.1016/j.matlet.2012.11.070 ↗
7. Revealing the innermost nanostructure of sputtered Nicro X solar absorber cermets10.1016/j.solmat.2013.10.009 ↗
8. Development of W–SiO2 and Nb–TiO2 solar absorber coatings for combined heat and power systems at intermediate operation temperatures10.1016/j.solmat.2014.10.022 ↗
9. Improvement of thermal stability in the solar selective absorbing Mo–Al2O3 coating10.1016/j.solmat.2012.11.010 ↗
10. Stainless-steel–AlN cermet selective surfaces deposited by direct current magnetron sputtering technology10.1016/S0927-0248(97)00274-2 ↗
11. High performance mid-temperature selective absorber based on titanium oxides cermet deposited by direct current reactive sputtering of a single titanium target10.1063/1.4940386 ↗
12. Metamaterials: a new frontier of science and technology10.1039/c0cs00184h ↗
13. Perfect selective metamaterial solar absorbers10.1364/OE.21.0A1078 ↗
14. Wavelength-selective and diffuse emitter enhanced by magnetic polaritons for thermophotovoltaics10.1063/1.3684874 ↗
15. Highly efficient selective metamaterial absorber for high-temperature solar thermal energy harvesting10.1016/j.solmat.2015.02.019 ↗
16. Wavelength-selective solar thermal absorber with two-dimensional nickel gratings10.1115/1.4026954 ↗
17. Broadband solar thermal absorber based on optical metamaterials for high temperature applications10.1002/adom.201600236 ↗
18. Broadband optical absorption based on single-sized metal-dielectric-metal plasmonic nanostructures with high-ε metals10.1063/1.4977860 ↗
19. Light absorber based on nano-spheres on a substrate reflector10.1364/OE.21.006697 ↗
20. Lithography-free broadband visible light absorber based on a mono-layer of gold nanoparticles10.1088/2040-8978/16/2/025002 ↗
21. Selective absorption of visible light in film-coupled nanoparticles by exciting magnetic resonance10.1364/OL.39.001457 ↗
22. High-temperature tantalum tungsten alloy photonic crystals: stability, optical Properties, and fabrication10.1063/1.4821586 ↗
23. Two-dimensional tungsten photonic crystals as selective thermal emitters10.1063/1.2927484 ↗
24. Large-area fabrication of high aspect ratio tantalum photonic crystals for high-temperature selective emitters10.1116/1.4771901 ↗
25. Large-scale nanophotonic solar selective absorbers for high-efficiency solar thermal energy conversion10.1002/adma.201501686 ↗
26. A refractory selective solar absorber for high performance thermochemical steam reforming10.1016/j.apenergy.2016.02.121 ↗
27. Efficient absorption of visible radiation by gap plasmon resonators10.1364/OE.20.013311 ↗
28. Dual-band perfect absorber for multispectral plasmon-enhanced infrared spectroscopy10.1021/nn3026468 ↗
29. High temperature layered absorber for thermo-solar systems10.1016/j.jqsrt.2014.07.023 ↗
30. Heavy ion elastic recoil detection analysis of AlxOy/Pt/AlxOy multilayer selective solar absorber10.1016/j.apsusc.2014.01.156 ↗
31. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
32. Spectrally selective absorber coating of WAlN/WAlON/Al2O3 for solar thermal applications10.1016/j.solmat.2016.07.018 ↗
33. Thermal stability of WAlN/WAlON/Al2O3 based solar selective absorber coating10.1557/adv.2016.388 ↗
34. Structure and thermal stability of spectrally selective absorber based on AlCrON coating for solar-thermal conversion applications10.1016/j.solmat.2016.05.035 ↗
35. Direct measurement of thermal emission from a Fabry–Perot cavity resonator10.1115/1.4006088 ↗
36. Particle swarm optimization in electromagnetics10.1109/TAP.2004.823969 ↗
37. Advances in particle swarm optimization for antenna designs: real-number, binary, single-objective and multiobjective implementations10.1109/TAP.2007.891552 ↗
38. Air Mass 1.5 Spectra, American Society for Testing and Materials (ASTM), Available from: 〈http://rredc.nrel.gov/solar/spectra/am1.5/〉.
39. Palik · 1998
40. Zhang · 2007
41. Berreman mode and epsilon near zero mode10.1364/OE.20.023971 ↗
42. Trapping mid-infrared rays in a lossy film with the Berreman mode, epsilon near zero mode, and magnetic polaritons10.1364/OE.21.020771 ↗