Ex-situ doping of polysilicon hole contacts for silicon solar cells via electron-beam boron evaporation
Source abstract
Abstract
In this study, a novel method for doping of p + polysilicon (poly-Si)/SiO x passivated contacts is demonstrated. This is achieved by using a thin (∼3 nm) boron layer, deposited by electron beam evaporation, as a dopant source on top of an intrinsic poly-Si layer, which allows diffusion of boron into the structure at temperatures above 900 °C. Surface passivation, exemplified by the implied open circuit voltage ( iV oc ), and contact resistance, represented by the specific contact resistivity ( ρ c ), were studied as a function of activation parameters including the drive-in temperature/time. By optimising the activation condition, doping layer thickness, and hydrogenation process, an iV oc of 709 mV and a ρ c of 3.2 mΩcm 2 is achieved for a 180 nm poly-Si film. This technique was also demonstrated to allow simple patterning of p + poly-Si regions via use of a shadow mask during the boron deposition process. These results highlight an alternative way to form patterned region doping for high performance p + poly-Si/SiO x passivated contacts, allowing advanced silicon solar cell architectures. • Novel approach to form p + poly-Si contacts by using e-beam evaporation of a pure boron dopant layer followed by furnace drive-in. • Compatible with shadow mask to form simple patterned region doping. • Optimization of passivation quality by varying furnace temperature and drive-in time. • Good iV oc of 709 mV is achieved as well as a low ρ c of 3.2 mΩcm 2 .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Silicon solar cells with passivating contacts: classification and performance10.1002/pip.3574 ↗
2. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
3. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
4. Richter, A., Muller, R., Benick, J., Feldmann, F., Reichel, C., Steinhauser, B., Hermle, M. & Glunz, S. in 10th International Conference on Crystalline Silicon Photovoltaics.
5. Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning10.1016/j.solmat.2020.110834 ↗
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
8. Development of phosphorus-doped nanoscale poly-Si passivating contacts via inkjet printing for application in silicon solar cells10.1021/acsanm.2c04148 ↗
9. Localisation of front side passivating contacts for direct metallisation of high-efficiency c-Si solar cells10.1016/j.solmat.2021.111455 ↗
10. Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts10.1016/j.solmat.2022.112123 ↗
11. Plasma immersion ion implantation for tunnel oxide passivated contact in silicon solar cell10.1016/j.solmat.2024.112730 ↗
12. Boron spin-on doping for poly-Si/SiOx passivating contacts10.1021/acsaem.1c00550 ↗
13. Schneiderloechner · 2023 · 1
14. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
15. Effects of boron doping on solid phase crystallization of in situ doped amorphous Silicon thin films prepared by electron beam evaporation10.1016/j.tsf.2019.137639 ↗
16. Polycrystalline silicon heterojunction thin-film solar cells on glass exhibiting 582mV open-circuit voltage10.1016/j.solmat.2013.03.013 ↗
17. Highly passivating and blister-free hole selective poly-silicon based contact for large area crystalline silicon solar cells10.1016/j.solmat.2019.109912 ↗
18. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
19. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
20. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
21. Hydrogenation mechanisms of poly-Si/SiOx passivating contacts by different capping layers10.1002/solr.202070033 ↗
22. Extended Cox & Strack analysis for the contact resistance of planar samples with carrier-selective junctions on both sides10.1016/j.solmat.2021.111304 ↗
23. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
24. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces
25. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
26. Surface damage caused by electron-beam metallization of high open-circuit voltage solar cells10.1109/EDL.1984.25905 ↗
27. Direct observation of the impurity gettering layers in polysilicon-based passivating contacts for silicon solar cells10.1021/acsaem.8b00367 ↗