Study on the application of glass ceramics based on vanadium dioxide as a bypass device in solar cells
Source abstract
Abstract
Abstract The work explored the possibility of using glass critical thermistors based on vanadium dioxide to improve reliability and prevent electrothermal overloads in photovoltaic components of solar cells. Glass-ceramic materials based on vanadium dioxide and vanadium phosphate glass V2O5-P2O5 were used as a thermistor element, which abruptly change the value of electrical resistance by 1.5–2 orders of magnitude at a temperature of about 70°C. It has been established that the thermistor structures under consideration can function as bypass elements in solar modules. Such elements react directly both to the presence of overvoltage and to temperature increase in individual photovoltaic cells with increased resistance, and thus provide increased reliability of solar array as a whole.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Pigment Synthesis and Properties · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Review of degradation and failure phenomena in photovoltaic modules10.1016/j.rser.2022.112160 ↗
2. Review of models for photovoltaic crack and hotspot prediction10.3390/en15124303 ↗
3. Failures of photovoltaic modules and their detection: a review
4. Hot spot detection and prevention using a simple method in photovoltaic panels10.1049/iet-gtd.2016.0794 ↗
5. Reexamination of photovoltaic hot spotting to show inadequacy of the bypass diode10.1109/JPHOTOV.2015.2444091 ↗
6. Novel open-circuit photovoltaic bypass diode fault detection algorithm10.1109/JPHOTOV.2019.2940892 ↗
7. Analysis of electrical and thermal characteristics of PV array under mismatching conditions caused by partial shading and short circuit failure of bypass diodes
8. A power MOS based circuit for controlling the hot spot temperature in photovoltaic modules
9. Review and a novel strategy for mitigating hot spot of PV panels10.1016/j.solener.2020.11.047 ↗
10. Using a layer based on materials with a metal to semiconductor phase transition for electrothermal protection of solar cells
11. Vanadium dioxide: the multistimuli responsive material and its applications
12. The influence of microstructure and phase composition of glass-ceramics in the VO2–V2O5–P2O5–Cu2O–SnO2 system on the electrical properties related to the metal-semiconductor phase transition10.1016/j.ceramint.2012.10.189 ↗
13. Kinetics of current in glass-ceramics on the base of vanadium dioxide10.1007/s10832-019-00187-2 ↗
14. The size effect in current-voltage characteristic of VO2-based ceramics in the on-state10.1007/s10854-006-9106-3 ↗
15. Improved threshold switching characteristics of vanadium oxide/oxynitride-based multilayer selector in a cross-point array10.1016/j.jallcom.2022.166192 ↗
16. Changes in the characteristics of silicon photovoltaic cells of solar arrays after current overloads
17. An assessment of series resistance estimation techniques for different silicon based SPV modules10.1016/j.rser.2018.09.020 ↗
18. Determining series resistance for equivalent circuit models of a PV module10.1109/JPHOTOV.2018.2883703 ↗
19. Examining the influence of thermal effects on solar cells: a comprehensive review