journal article·2026-04Open access

On the influence of partial shading and the use of bypass diodes on perovskite-based single-junction photovoltaic mini-modules

Stefan Gall, Mohammad Fadi Al Rayes, Felix Hermerschmidt, Edgar Nandayapa, Emil J.W. List-Kratochvil

Abstract

Partial shading poses a significant challenge to the stability of metal halide perovskite solar modules. In solar modules based on serial connection of solar cells, partial shading of the solar module can force shaded solar cells to operate under reverse bias voltages, which might lead to a degradation of the shaded solar cells and therefore also of the whole solar module. Metal halide perovskite solar cells are very sensitive to reverse bias voltages, making partial shading a critical issue for the related solar modules. Bypass diodes connected to each solar cell offer a potential solution to mitigate this problem. We investigated the impact of partial shading on mini-modules comprising two serially connected triple-cation metal halide perovskite single-junction solar cells. The performance of the mini-modules and their individual solar cells was compared before and after partial shading to quantify its influence. Experiments were conducted with and without a bypass diode connected to each individual solar cell. Results revealed power conversion efficiency ( PCE ) degradation of both shaded and non-shaded solar cells, at which the degradation of the shaded solar cell is significantly more pronounced, especially in the absence of a bypass diode, where an average PCE drop of 96 % was observed for the shaded solar cells. The use of bypass diodes, which limited in our case the reverse bias voltage across the shaded solar cells to about −0.2 V, reduced the average PCE drop of the shaded solar cell from 96 % to 34 %, which is still a significant degradation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · solar cell performance optimization · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Editorial: perovskites take steps to industrialization
2. Techno-economic and environmental sustainability of industrial-scale productions of perovskite solar cells10.1016/j.rser.2022.112146 ↗
3. Finally, inkjet-printed metal halide perovskite LEDs – utilizing seed crystal templating of salty PEDOT:PSS10.1039/D0MH00512F ↗
4. Large area inkjet-printed metal halide perovskite LEDs enabled by gas flow assisted drying and crystallization10.1039/D3NR00565H ↗
5. Using combinatorial inkjet printing for synthesis and deposition of metal halide perovskites in wavelength-selective photodetectors10.1002/adem.202101111 ↗
6. Ink design enabling slot-die coated perovskite solar cells with >22% power conversion efficiency, micro-modules, and 1 year of outdoor performance evaluation
7. Perovskite solar cells based on screen-printed thin films10.1038/s41586-022-05346-0 ↗
8. Co-evaporated p-i-n perovskite solar cells beyond 20% efficiency: impact of substrate temperature and hole transport layer10.1021/acsami.0c10898 ↗
9. A review on scaling up perovskite solar cells
10. Highly efficient p-i-n persovskite solar cells that endure temperature variations10.1126/science.add7331 ↗
11. Designing modules to prevent reverse bias degradation in perovskite solar cells when partial shading occurs10.1002/solr.202100239 ↗
12. Reverse bias behavior of halide perovskite solar cells10.1002/aenm.201702365 ↗
13. Instability of p-i-n perovskite solar cells under reverse bias10.1039/C9TA12032G ↗
14. Incorporating electrochemical halide oxidation into drift-diffusion models to explain performance losses in perovskite solar cells under prolonged reverse bias
15. Reverse-bias and temperature behaviors of perovskite solar cells at extended voltage range10.1021/acsaem.1c03206 ↗
16. Perovskite photovoltaic devices with carbon-based electrodes withstanding reverse-bias voltages up to -9 V and surpassing IEC 61215:2016 international standard10.1002/solr.202100527 ↗
17. How non-ohmic contact-layer diodes in perovskite pinholes affect abrupt low-voltage reverse-bias breakdown and destruction of solar cells10.1016/j.joule.2025.102102 ↗
18. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗