Long-term (∼3000 h) in situ XRD investigation of environmental stabilization in hybrid perovskites via trace 2D loading
Source abstract
Abstract
The poor environmental stability of three-dimensional (3D) halide perovskites remains a critical barrier to their commercialization. Mixed-dimensional systems incorporating two-dimensional (2D) perovskites have shown improved stability, yet high 2D fractions often compromise optoelectronic performance. Here, we demonstrate that introducing only 0.02 (2%) 2D perovskite into methylammonium lead iodide (MAPI) films - both undoped and with 15% nominal bromine substitution - yields a pronounced enhancement in intrinsic environmental stability. Long-term (∼3000 h) in situ X-ray diffraction measurements on non-encapsulated films exposed to ambient air (∼40% relative humidity) reveal a two-to four-fold reduction in perovskite decomposition and PbI 2 formation rate, with a significant fraction of the perovskite phase remaining intact. This stabilization arises from the preferential localization of the 2D phase at film surfaces and grain boundaries, where it encapsulates 3D grains and kinetically suppresses diffusion of reactive species such as moisture and oxygen. Bromine incorporation provides an additional, though smaller, stabilizing effect. These findings identify low-fraction 2D incorporation as a highly efficient and scalable strategy for enhancing the environmental stability of hybrid perovskites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · 2D Materials and Applications · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
2. High-efficiency perovskite solar cells10.1021/acs.chemrev.0c00107 ↗
3. Rapid advances enabling high-performance inverted perovskite solar cells10.1038/s41578-024-00678-x ↗
4. Stability in perovskite photovoltaics: a paradigm for newfangled technologies10.1021/acsenergylett.8b00914 ↗
5. Stability of perovskite solar cells: issues and prospects10.1039/D2RA05903G ↗
6. Long-term operating stability in perovskite photovoltaics10.1038/s41578-023-00582-w ↗
7. Key degradation mechanisms of perovskite solar cells and strategies for enhanced stability: issues and prospects10.1039/D4RA07942F ↗
8. Degradation mechanisms and stability challenges in perovskite solar cells: a comprehensive review10.1016/j.solener.2025.113707 ↗
9. Effects of ion migration and improvement strategies for the operational stability of perovskite solar cells10.1039/D0CP04418K ↗
10. Humidity‐induced degradation processes of halide perovskites unveiled by correlative analytical electron microscopy10.1002/smtd.202300901 ↗
11. Degradation pathways in perovskite solar cells and how to meet international standards10.1038/s43246-022-00281-z ↗
12. Reversible hydration of CH3NH3PbI3 in films, single crystals, and solar cells10.1021/acs.chemmater.5b00660 ↗
13. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
14. The impact of moisture on the stability and degradation of perovskites in solar cells10.1039/D3MA00828B ↗
15. The interactions between halide perovskites and oxygen: from stages to strategies10.1016/j.matt.2024.08.007 ↗
16. Degradation mechanisms of perovskite solar cells under vacuum and one atmosphere of nitrogen10.1038/s41560-021-00912-8 ↗
17. One-year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
18. Degradation behavior of methylammonium lead iodide (CH3NH3PbI3) perovskite film in ambient atmosphere and device10.1016/j.solener.2023.03.021 ↗
19. Encapsulation-driven stability in perovskite solar cells: suppressing degradation through hermetic sealing
20. Prolonged lifetime of perovskite solar cells using a moisture-blocked and temperature-controlled encapsulation system comprising a phase change material as a cooling agent10.1021/acsomega.9b03407 ↗
21. Understanding the stability of MAPbBr3 versus MAPbI3: suppression of methylammonium migration and reduction of halide migration10.1021/acs.jpclett.0c01822 ↗
22. Significance of formamidinium incorporation in perovskite composition and its impact on solar cell efficiency: a mini‐review10.1002/aesr.202400003 ↗
23. Two-dimensional perovskitoids enhance stability in perovskite solar cells10.1038/s41586-024-07764-8 ↗
24. A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: perovskites structures, stability, and photovoltaic performances10.1016/j.jphotochemrev.2021.100405 ↗
25. Recent advances in perovskites-based optoelectronics10.1515/ntrev-2022-0494 ↗
26. Two-dimensional hybrid halide perovskites: principles and promises10.1021/jacs.8b10851 ↗
27. Two-dimensional halide perovskites: synthesis, optoelectronic properties, stability, and applications10.1039/D1NR02769G ↗
28. Low-dimensional perovskite modified 3D structures for higher-performance solar cells10.1016/j.jechem.2023.01.061 ↗
29. Thermodynamic origin of the photostability of the two-dimensional perovskite PEA2Pb (I1–x Br x) 410.1021/acsenergylett.2c02463 ↗
30. 2D perovskite stabilized phase-pure formamidinium perovskite solar cells10.1038/s41467-018-05454-4 ↗
31. Revealing degradation mechanisms in 3D/2D perovskite solar cells under photothermal accelerated ageing10.1039/D4EE03869J ↗
32. Long-term stability analysis of 3D and 2D/3D hybrid perovskite solar cells using electrochemical impedance spectroscopy10.3390/molecules25245794 ↗
33. In situ and operando characterization techniques in stability study of perovskite-based devices10.3390/nano13131983 ↗
34. Shedding light on the moisture stability of 3D/2D hybrid perovskite heterojunction thin films10.1021/acsaem.9b00005 ↗
35. Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics10.1039/C7TA09657G ↗
36. In situ analysis reveals the role of 2D perovskite in preventing thermal-induced degradation in 2D/3D perovskite interfaces10.1021/acs.nanolett.0c01271 ↗
37. In situ PL tracking of halide exchange at 3D/QD heterojunction perovskite solar cells10.1021/acsenergylett.4c01268 ↗
38. Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites10.1038/nenergy.2017.135 ↗
39. Ligand-stabilized reduced-dimensionality perovskites10.1021/jacs.5b11740 ↗
40. Hybrid 2D/3D perovskite film with enhanced crystallinity via PEAI passivation in perovskite solar cells
41. The effects of doping and coating on degradation kinetics in perovskites10.1016/j.solmat.2021.111142 ↗
42. Halide-dependent electronic structure of organolead perovskite materials10.1021/acs.chemmater.5b01909 ↗
43. Factors influencing halide vacancy transport in perovskite solar cells10.1007/s43939-022-00029-z ↗
44. Defect repairing in lead bromide perovskite single crystals with biasing and bromine for X-ray photon-counting detectors
45. Bromine incorporation and suppressed cation rotation in mixed-halide perovskites10.1021/acsnano.0c05179 ↗
46. In situ XPS investigation of the X-ray-triggered decomposition of perovskites in ultrahigh vacuum condition10.1038/s41529-021-00162-9 ↗
47. Moisture tolerant solar cells by encapsulating 3D perovskite with long-chain alkylammonium cation-based 2D perovskite10.1038/s43246-021-00200-8 ↗
48. 3D/2D bilayerd perovskite solar cells with an enhanced stability and performance10.3390/ma13173868 ↗
49. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells