journal article·2026-10

Beyond lead halide perovskites: visible light photovoltaics with phase engineered bismuth-based oxide double-perovskites, Bi2MCrO6 (M = Fe, Mn)

N.P. Vikas, Ranjit Kumar Pradhan, Somdutta Mukherjee, Udai P. Singh, Biplab K. Patra, Ravi P. Srivastava, Amritendu Roy

Publisher page

Abstract

Lead poisoning and notorious ambient instability in lead-based halide perovskites pave the way for the exploration of alternative materials for affordable and efficient solar cell fabrication. An important prerequisite to this end is the optoelectronic evaluation of the proposed material. Here we report, optoelectronic characterization of Bi2FeCrO6 (BFCO) and Bi2MnCrO6 (BMCO) thin films vis-à-vis performance of photovoltaic cells. Solution-deposited thin films (350-450 nm) of the above compositions demonstrate a double-perovskite structure with monoclinic P21/c symmetry, albeit with mixed cation valences and deep-level defects. A thorough optoelectronic evaluation exhibits large optical absorption in the visible range (α ~ 104 -105 cm-1), and high carrier density, ~1017-20 cm-3. Ultraviolet photoelectron spectroscopy measurement allowed determination of the positions of the band-edges (valence band maximum and conduction band minimum), required for the selection of carrier transport layers. In its first, BMCO-based FTO/SnO2/BMCO/Spiro-OMeTAD/Ag solar cell produced a maximum 3.56% conversion efficiency. Using numerical simulation, we predict that with suitable defect control, the above conversion efficiency can increase significantly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Multiferroics and related materials · Perovskite Materials and Applications · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Oxide perovskites, double perovskites and derivatives for electrocatalysis, photocatalysis, and photovoltaics10.1039/C8EE01574K ↗
2. Transition metal oxides – thermoelectric properties10.1016/j.pmatsci.2013.06.003 ↗
3. Rationalization of double perovskite oxides as energy materials: a theoretical insight from electronic and optical properties10.1021/acsmaterialsau.2c00031 ↗
4. Photoconductivity in BiFeO3 thin films10.1063/1.2887908 ↗
5. Semitransparent perovskite solar cells10.1021/acsenergylett.0c00417 ↗
6. Engineering inorganic perovskite solar cells: overcoming efficiency and stability barriers for next-generation photovoltaics
7. Electronic structure of MAPbI3 and MAPbCl3: importance of band alignment10.1038/s41598-019-50108-0 ↗
8. Identifying defect-tolerant semiconductors with high minority-carrier lifetimes: beyond hybrid lead halide perovskites10.1557/mrc.2015.26 ↗
9. Machine learning-aided discovery of bismuth-based transition metal oxide double perovskites for solar cell applications10.1016/j.solener.2023.112209 ↗
10. Epitaxial Bi2FeCrO6 multiferroic thin films10.1080/09500830601153402 ↗
11. Epitaxial thin films of the multiferroic double perovskite Bi2FeCrO6 grown on (100)-oriented SrTiO3 substrates: growth, characterization, and optimization10.1063/1.3073826 ↗
12. Photovoltaic properties of Bi2FeCrO6 epitaxial thin films10.1063/1.3590270 ↗
13. Investigating a Pb-free n-i-p perovskite solar cell with BFCO absorber using SCAPS-1D10.1016/j.ijleo.2024.171659 ↗
14. Epitaxial Bi2FeCrO6 multiferroic thin-film photoanodes with Ultrathin p-Type NiO layers for improved solar water oxidation10.1021/acsami.8b20998 ↗
15. Epitaxial Bi2FeCrO6 multiferroic thin film as a new visible light absorbing photocathode material10.1002/smll.201403206 ↗
16. First-principles investigation of bandgap tailoring in tetragonal Bi2FeCrO6 by magnetic ordering and B-site-cation ordering
17. Bandgap tuning of multiferroic oxide solar cells10.1038/nphoton.2014.255 ↗
18. Highly sensitive switchable heterojunction photodiode based on epitaxial Bi2FeCrO6 multiferroic thin films10.1021/acsami.8b00459 ↗
19. Optimal Bandgap of double Perovskite La-Substituted Bi2FeCrO6 for solar cells: an ab initio GGA+U study10.1088/0256-307X/34/1/016101 ↗
20. Comparative analysis of ‘La’ modified BiFeO3-based perovskite solar cell devices for high conversion efficiency10.1016/j.ceramint.2022.09.112 ↗
21. Room temperature weak ferromagnetism in new Bi2MnCrO6 synthesized by gel combustion method10.1007/s00339-022-05400-8 ↗
22. Exploration of the photovoltaic properties of oxide-based double perovskite Bi2FeCrO6 using an amalgamation of DFT with spin–orbit coupling effect and SCAPS-1D simulation approaches10.1039/D3NJ02841K ↗
23. SCAPS-1D study on the design and performance optimization of Sr3NCl3 solar cell: assessing the significance of copper oxide (Cu2O) and copper(I) thiocyanate (CuSCN) as hole transport layers10.1016/j.jpcs.2025.113170 ↗
24. Numerical simulation and optimization of FTO/TiO2/CZTS/CuO/Au solar cell using SCAPS-1D10.1038/s41598-025-12999-0 ↗
25. A critical review of unrealistic results in SCAPS-1D simulations: causes, practical solutions and roadmap ahead10.1016/j.solmat.2024.113230 ↗
26. Effect of doping on optical properties in BiMn1−x(TE)xO3 (where x = 0.0, 0.1 and TE = Cr, Fe, Co, Zn) nanoparticles synthesized by microwave and sol-gel methods10.1007/s00339-017-1042-y ↗
27. Multiferroic properties of La-doped Bi2FeCrO6 prepared by high-pressure synthesis10.1063/1.3670576 ↗
28. Reproducible resistive switching in the super-thin Bi2FeCrO6 epitaxial film with SrRuO3 bottom electrode10.1063/1.4964603 ↗
29. Structure, magnetism and giant dielectric constant of BiCr0.5Mn0.5O3 synthesized at high pressures10.1039/B914350P ↗
30. Band-gap tuning in ferroelectric Bi2FeCrO6 double perovskite thin films10.1021/acs.jpcc.7b10622 ↗
31. Growth, structure, and properties of epitaxial thin films of first-principles predicted multiferroic Bi2FeCrO610.1063/1.2346258 ↗
32. The impacts of cation stoichiometry and substrate surface quality on nucleation, structure, defect formation, and intermixing in complex oxide Heteroepitaxy–LaCrO3 on SrTiO3(001)10.1002/adfm.201202655 ↗
33. Broadband NIR-II phosphors with Cr4+ single activated centers based on special crystal structure for nondestructive analysis10.1016/j.ceramint.2022.05.391 ↗
34. Structural, magnetic, dielectric and optical properties of double-perovskite Bi2FeCrO6 ceramics synthesized under high pressure10.1016/j.jallcom.2019.153007 ↗
35. XPS study in BiFeO3 surface modified by Argon etching10.3390/ma15124285 ↗
36. Porous MnOx for low-temperature NH3-SCR of NOx: the intrinsic relationship between surface physicochemical property and catalytic activity10.1007/s11051-017-3887-6 ↗
37. Epitaxially grown heterostructured SrMn3O6−x-SrMnO3 with high-valence Mn3+/4+ for improved oxygen reduction catalysis10.1002/anie.202109207 ↗
38. B-cation arrangements in double perovskites10.1016/0079-6786(93)90004-B ↗
39. Passivation of defects in perovskite solar cell: from a chemistry point of view10.1016/j.nanoen.2020.105237 ↗
40. Universal approach toward hysteresis-free perovskite solar cell via defect engineering10.1021/jacs.7b10430 ↗
41. Dedoping of lead halide perovskites incorporating monovalent cations10.1021/acsnano.8b03586 ↗
42. Alkali metal ions passivation to decrease interface defects of perovskite solar cells10.1016/j.solener.2019.09.056 ↗
43. Efficient and hole-transporting-layer-free CsPbI2Br planar heterojunction perovskite solar cells through rubidium passivation10.1002/cssc.201802690 ↗
44. Exploring inorganic binary Alkaline halide to passivate defects in low-temperature-processed planar-structure hybrid perovskite solar cells10.1002/aenm.201800138 ↗
45. Activation of Al2O3 surface passivation of silicon: separating bulk and surface effects10.1016/j.apsusc.2023.158786 ↗
46. MAPbI3 and FAPbI3 perovskites as solar cells: case study on structural, electrical and optical properties10.1016/j.rinp.2018.07.007 ↗
47. A facile method for Tauc exponent and corresponding electronic transitions determination in semiconductors directly from UV–Vis spectroscopy data10.1016/j.optmat.2022.112205 ↗
48. Tuning photovoltaic response in Bi2FeCrO6 films by ferroelectric poling10.1039/C8NR03137A ↗
49. Multiferroic Bi2FeCrO6 based p–i–n heterojunction photovoltaic devices10.1039/C7TA01604B ↗
50. Epitaxial thin films of multiferroic Bi2FeCrO6 with B-site cationic order10.1557/jmr.2007.0273 ↗
51. Effect of cuprous iodide passivation in perovskite solar cells10.1007/s10854-022-08368-6 ↗
52. Role of Urbach energy in controlling voltage output of solar cells10.1007/s11082-023-05067-2 ↗
53. Precursor solution temperature dependence of the optical constants, band gap and Urbach tail in organic–inorganic hybrid halide perovskite films
54. The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids10.1103/PhysRev.92.1324 ↗
55. Toward a unified theory of Urbach's rule and exponential absorption edges10.1103/PhysRevB.5.594 ↗
56. Disorder and the optical-absorption edge of hydrogenated amorphous silicon10.1103/PhysRevLett.47.1480 ↗
57. Optical study of monocrystalline CuIn4 Se610.1088/0022-3727/34/24/309 ↗
58. Effect on green energy conversion and stability with ‘Er’ modification in multiferroic based perovskite solar cell devices
59. Co-Evaporated MAPbI3 with graded fermi levels enables highly performing, scalable, and flexible p-i-n perovskite solar cells
60. Current development toward commercialization of metal-halide perovskite photovoltaics10.1002/adom.202100390 ↗
61. Growth of p/n-type BiFeO3 thin films for construction of a bilayer p–n junction for photodegradation of organic pollutants10.1039/D4TA01615G ↗
62. Why perovskite solar cells with high efficiency show small IV-curve hysteresis10.1016/j.solmat.2017.05.021 ↗
63. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
64. Solution-processed CuIn(S,Se)2 absorber layers for application in thin film solar cells10.1016/j.tsf.2014.10.080 ↗
65. Optimization of lead-free CsSnBr3-based perovskite solar cells via SCAPS-1D simulations and machine learning models10.1016/j.jpcs.2025.113340 ↗
66. Advances in lead-free perovskite solar cell design via SCAPS-1D simulations10.1039/D5SU00526D ↗