journal article·2026-10Open access

Synergistic nanotube TiO2-CuO heterostructures in epoxy coating vermiculite composites phase change materials for dual-enhanced thermal energy storage and photothermal conversion

Min Li, Jinqian Yang

Abstract

Solar thermal conversion employing phase change composite materials represents a viable approach for harnessing and storing solar thermal energy. In this study, a novel type of organic phase change composite material adsorbed by expanded vermiculite (EV) was successfully constructed by vacuum impregnation. Paraffin (PA) and octadecyl alcohol (OA) were used as phase change materials, and layered expanded vermiculite was used to adsorb the phase change materials as support materials. Titanium dioxide nanotubes (TiO 2) and copper oxide (CuO) were added as thermal conductive fillers, and finally epoxy resin (EP) was coated on the outer layer to form EV phase change composites. Among them, the composites are well protected against the leakage of organic phase change materials above the phase change point. The phase change composites exhibit outstanding shape stability with a PW-OA loading rate of 68.43 percent, along with a high heat storage capacity demonstrated by a ΔH value of 140.50 J/g. Moreover, the material shows significantly improved thermal conductivity, reaching 2.66 times that of PW-OA, and achieves exceptional solar thermal conversion efficiency, measured at 95.72%. These results strongly demonstrate that innovative phase change composites have great potential not only in the field of solar energy utilization and development, but also in the field of heat storage and management.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Applications of artificial neural networks in concentrating solar power systems
2. Study on the photothermal conversion enhancement performance and application of the metal-polyphenol phase-change microcapsules modified by molybdenum disulfide10.1016/j.cej.2024.150929 ↗
3. Preparation and properties of NH4Al (SO4) 2· 12H2O-CH3COONa· 3H2O eutectic phase change materials and supercooling modification10.1016/j.solener.2025.114041 ↗
4. Preparation and photothermal investigation of PDA and CuNPs coupled modified expanded graphite with sodium acetate trihydrate composite phase change materials10.1016/j.solener.2025.113478 ↗
5. Study on preparation, structure and thermal energy storage property of capric–palmitic acid/attapulgite composite phase change materials10.1016/j.apenergy.2011.02.030 ↗
6. Effect of dopamine-modified expanded vermiculite on phase change behavior and heat storage characteristic of polyethylene glycol10.1016/j.cej.2021.128992 ↗
7. A comparative study on PCM-impregnated shape-stable expanded vermiculite used in bricks for stabilizing indoor temperature and enhancing energy efficiency of buildings10.1016/j.enbuild.2025.116603 ↗
8. Preparation and performance evaluation of expanded vermiculite-based phase change materials for building thermal insulation and energy saving10.1039/D5RA09349J ↗
9. Enhanced light‐thermal absorption and conversion capacity of diatomite‐based polyethylene glycol composites phase change materials by introducing polydopamine10.1002/pol.20250437 ↗
10. ZIF-engineered interpenetrating 3D network for efficient solar-thermal energy storage
11. A review on thermal properties improvement of phase change materials and its combination with solar thermal energy storage10.1002/ente.202100169 ↗
12. Three-dimensional hierarchical porous carbon surface-decorated graphitic carbon foam/stearic acid composite as high-performance shape-stabilized phase change material with desirable photothermal conversion efficiency10.1016/j.apenergy.2023.121995 ↗
13. Investigation on thermal performance of epoxy resin encapsulated eutectic hydrated salt/expanded perlite composite phase change materials for thermal energy storage10.1016/j.solmat.2025.113453 ↗
14. MXene/polydopamine synergistic enhancement of thermal conductivity and photothermal conversion efficiency in diatomite/polyethylene glycol composite phase change materials10.1016/j.colsurfa.2025.139338 ↗
15. Nano‐cu particles modified graphene‐polyvinyl alcohol foam composite phase change materials for efficient solar‐thermal conversion and storage
16. Titanium dioxide/graphene oxide synergetic reinforced composite phase change materials with excellent thermal energy storage and photo-thermal performances10.1016/j.jmrt.2024.09.011 ↗
17. Phase change material nanocomposites for thermal energy storage applications on solar water heater10.1016/j.rineng.2025.104428 ↗
18. Highly flexible and self-healing phase change hydrogel with superior solar-thermal storage and sensitive motion detection for wearable thermal management10.1016/j.compositesa.2025.109038 ↗
19. Ultra-flexible, adaptable and multifunctional polymer-based composite phase change materials for full-stage battery thermal management
20. All-weather solar desalination enabled by biomass-derived carbon aerogel/PCM composites with bio-inspired melanin-enhanced interface10.1016/j.cej.2026.173979 ↗
21. The synthesis and characterization of phase change material microcapsules with titanium oxide nanotubes for thermal energy regulation10.1016/j.applthermaleng.2023.121703 ↗
22. Construction of high performance wood-based phase change composite for photothermal conversion and energy storage by dual entangled network10.1016/j.est.2025.120058 ↗
23. A novel flexible phase change materials with reversible thermochromic for solar thermal energy storage
24. Polypyrrole-coated expanded graphite-based phase change materials for photothermal energy storage
25. Novel composite phase change material of high heat storage with photothermal and self-cleaning function10.1016/j.indcrop.2022.116103 ↗
26. Regulation of the physical characteristics of titania nanotube aggregates synthesized from hydrothermal treatment10.1021/cm049643u ↗
27. Titania nanotubes prepared by chemical processing10.1002/(SICI)1521-4095(199910)11:15<1307::AID-ADMA1307>3.0.CO;2-H ↗
28. Structural features of nanotubes synthesized from NaOH treatment on TiO2 with different post-treatments10.1021/cm0518527 ↗
29. A review on TiO2-based nanotubes synthesized via hydrothermal method: formation mechanism, structure modification, and photocatalytic applications10.1016/j.cattod.2013.10.090 ↗
30. A nano-graphite/paraffin phase change material with high thermal conductivity10.1016/j.apenergy.2013.01.031 ↗
31. Production of ternary organic phase change material combined with expanded graphite and its application in cold chain transportation
32. Expanded graphite@ octadecanol composite phase change material with photothermal conversion interface10.1016/j.solener.2023.111922 ↗
33. Photoelectrochemical cathodic protection of Cu2O/TiO2 pn heterojunction under visible light10.1007/s00343-020-9327-y ↗
34. Visible light driven exotic p (CuO)-n (TiO2) heterojunction for the photodegradation of 4-chlorophenol and antibacterial activity10.1016/j.envpol.2021.117304 ↗
35. Study on the preparation and properties of TiO2@ n-octadecane phase change microcapsules for regulating building temperature10.1016/j.applthermaleng.2024.123429 ↗
36. Longitudinal confinement engineering in phase change materials
37. Effects of dopamine-modified and organic intercalation on the thermophysical properties of octadecane/expanded vermiculite composite phase change materials10.1021/acsomega.1c06815 ↗
38. Experimental study on the phase change behavior of phase change material confined in pores10.1016/j.solener.2006.08.010 ↗
39. Fe (II)-doped nano-TiO2 conjugated with Mg-doped carbon quantum dots as efficient photo-Fenton catalyst for the degradation of multiple water pollutants under diverse light conditions