article·2012-06-22

Oxidation and Au‐Sn reaction of laser reflowed micro‐solder joints protected by N2 or exposed to air atmosphere

Wei Liu, Yanhong Tian, Lei Yang, Chunqing Wang, Lining Sun

Publisher page

Abstract

Purpose The purpose of this paper is to investigate oxidation and the Au‐Sn reaction of laser reflowed (LR) micro‐solder joints when different protective atmospheres were applied. Design/methodology/approach A N2 atmosphere at room temperature, 60°C, 100°C and 130°C, or an air atmosphere at room temperature were utilized in this study. The solder balls were composed of Sn‐2.0Ag‐0.75Cu‐3.0Bi, and 120 μm in diameter. The surface finish of one pad of the joints was 4.0 μm Au/0.1 μm NiFe/0.01 μm Ta, another pad was made of Cu plated with 3.0 μm Au. The laser reflow process time was controlled to within 10 ms. Auger Electron Spectroscopy (AES) was used to identify the oxidation condition of LR solder joints with or without protection from a N2 atmosphere at room temperature. The appearance and cross‐sections of the joints protected by a N2 atmosphere at different temperatures were evaluated using SEM analysis. Findings Oxidation of LR solder joints from an air atmosphere was extremely severe, and the surfaces of solder were rough as compared with joints protected by a N2 atmosphere. Au‐rich phases and needle‐like AuSn4 intermetallic compounds (IMCs) formed at the interfaces of the solder and the pads. As the temperature of the N2 atmosphere was increased above 100°C, almost all of the Au‐rich phases disappeared. More needle‐like AuSn4 IMCs formed at the interfaces, as compared with that in joints protected by a N2 atmosphere at room temperature and 60°C. In addition, the orientation of the IMCs had clearly changed. Originality/value The results may provide a guide for controlling oxidation and the Au‐Sn reaction of micro‐solder joints during the LR process, and improving the properties of joints between solder and pads with Au surface finishes, by regulating the protective atmosphere.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Laser Material Processing Techniques · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.