journal article·2008-06

Mechanical Properties Measurement of PECVD Silicon Nitride after Rapid Thermal Annealing Using Nanoindentation Technique

H.‐Y. Yan, K.‐S. Ou, K.‐S. Chen

Strain· Volume 44· Issue 3
Publisher page

Abstract

Abstract: This paper presents the results of mechanical characterisation of residual stress, elastic modulus, hardness and fracture toughness of plasma‐enhanced chemical vapour deposited (PECVD) silicon nitride films subjected to rapid thermal annealing (RTA), processed between 200 and 800 °C. Additional tensile residual stresses were generated during the RTA period and the stress reached peak values after a 400 °C RTA process. On the other hand, nanoindentation testing revealed that both the modulus and hardness varied significantly with different RTA temperatures. Finally, the fracture toughness of the nitride was estimated to be 1.33 MPa √m based on a series of Vickers micro‐indentation tests and it can be enhanced by the RTA process. These results should be useful for microelectromechanical systems (MEMS) or integrated circuit (IC) structure fabrication as regards maintaining the structural integrity and improving fabrication performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 10.1088/0960-1317/15/3/02410.1088/0960-1317/15/3/024 ↗
2. Campbell S. A. · 1996
3. Ohring M. · 1992
4. 10.1016/S0040-6090(03)00462-010.1016/S0040-6090(03)00462-0 ↗
5. 10.1063/1.221710510.1063/1.2217105 ↗
6. 10.1016/j.msea.2006.07.01510.1016/j.msea.2006.07.015 ↗
7. 10.1109/84.73534210.1109/84.735342 ↗
8. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation10.1557/JMR.1992.0613 ↗
9. 10.1557/jmr.2004.19.1.310.1557/jmr.2004.19.1.3 ↗
10. 10.1016/S1359-6454(01)00328-710.1016/S1359-6454(01)00328-7 ↗
11. Stoney G. G. · 1909 · 172
12. 10.1088/0960-1317/12/6/32410.1088/0960-1317/12/6/324 ↗
13. 10.1007/978-0-387-22462-610.1007/978-0-387-22462-6 ↗
14. 10.1016/S0065-2156(08)70164-910.1016/S0065-2156(08)70164-9 ↗
15. 10.1016/0020-7683(87)90116-810.1016/0020-7683(87)90116-8 ↗
16. Indentation of brittle materials, microindentation techniques in materials science and engineering
17. Figliola R. S. · 2000 · 151
18. Chen K.‐S.(1999)Materials Characterization and Structure Design of Ceramic Micro Turbomachinery. PhD Thesis Department of Mechanical Engineering MIT Cambridge MA.
19. 10.1063/1.36819610.1063/1.368196 ↗
20. Chen T.‐C.(2005)Dimensional Analysis Approach for Theoretical Analysis and Numerical Simulation in Nanoindentation Test: Residual Stress Substrate Effects and Viscoelastic Properties. SM Thesis Department of Mechanical Engineering National Cheng‐Kung University Taiwan.