journal article·2005-05

Numerical Simulation of Brittle Damage in Concrete Specimens

Y. Labadi, N. E. Hannachi

Strength of Materials· Volume 37· Issue 3
Publisher page

Abstract

A framework for damage mechanics of concrete is applied to simulate the nonlinear elastic deformation behavior of concrete using finite element method (FEM). A rather simple isotropic damage model containing essentially no adjustable parameters is shown to produce results in remarkably good agreement with sample experimental data: the damage law requires only the fracture energy to be defined completely. The model is achieved by introducing a damage surface that is similar to the yield function in the conventional theory of plasticity. A special form of damage surfaces is constructed to illustrate the application of the model. A new damage criterion, defined as an equivalent strain norm, is proposed, in order to take into consideration the asymmetric behavior of concrete. For verifying the FEM program including the model, deformations predicted by this model are compared with both the experimental ones for the concrete structural model and the ones calculated without application of the continuum damage mechanics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. C. L. Chow and F. Yang, “On one-parameter description of damage state for brittle material,” Eng. Fract. Mech., 40, No.2, 335–343 (1991).10.1016/0013-7944(91)90268-6 ↗
2. J. L. Chaboche, P. M. Lesne, and J. F. Maire, “Continuum damage mechanics, anisotropy and damage deactivation for brittle materials like concrete and ceramic composites,” Int. J. Damage Mech., 4, No.1, 5–22 (1995).10.1177/105678959500400102 ↗
3. D. Krajcinovic and G. U. Fonseka, “The continuous damage theory of brittle materials, parts II and I, ” J. Appl. Mech. ASME, 48, 809–824 (1981).10.1115/1.3157739 ↗
4. P. Ladeveze and J. Lemaitre, “Damage effective stress in quasi-unilateral material conditions,” IUTAM Congress, Lyngby, Denmark (1984).
5. C. Cordebois and F. Sidoroff, “Endommagement anisotrope en elasticite et plasticite,” Journal de Mecanique appliquee, 25, 45–60 (1979).
6. S. Ramtani, “Contribution a la modelisation du comportement multiaxial du beton endommage avec description de l’effet unilateral,” These de doctorat de l’universite Paris VI, France (1990).
7. L. W. Ju, “On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects,” Int. J. Solids Struct., 25, No.7, 803–833 (1989).10.1016/0020-7683(89)90015-2 ↗
8. J. L. Chaboche, “Damage induced anisotropy: on the difficulties associated with the active/passive unilateral condition,” Int. J. Damage Mech., 1, 148–171 (1992).10.1177/105678959200100201 ↗
9. J. Lemaitre and J. Mazars, “Application de la theorie de l’endommagement au comportement non lineaire et a la rupture du beton de structure,” Annales de l’ITBTP, 401, 114–138 (1982).
10. J. Mazars and G. Pijaudier-Cabot, “Continuum damage theory-application to concrete,” ASCE J. Eng. Mech., 115, No.2, 345–365 (1989).10.1061/(ASCE)0733-9399(1989)115:2(345) ↗
11. C. Comi, “A non local model with tension and compression damage mechanisms,” Euro. J. Mech.: A/Solids, 20, 1–22 (2001).10.1016/S0997-7538(00)01111-6 ↗
12. F. Ghrib and R. Tinawi, “Non linear behavior of concrete dams using damage mechanics,” J. Eng. Mech., 121, No.4, 513–527 (1995).10.1061/(ASCE)0733-9399(1995)121:4(513) ↗
13. F. Ragueneau, J. Mazars, and C. La Borderie, “Damage model with frictional sliding. Contributions towards structural damping for concrete structures,” Rev. Euro. Elem. Finis, 10, 1–15 (2001).
14. J. W. Dougill, “On stable progressively fracturing solids,” Z. Angew. Math. Phys., 27, No.4, 423–437 (1976).10.1007/BF01594899 ↗
15. Z. P. Bazant and S. S. Kim, “Plastic fracturing theory for concrete,” ASCE J. Mech., 105, 407–428 (1979).
16. J. C. Simo, J. W. Ju, R. L. Taylor, and K. S. Pister, “On the strain-based continuum damage models: Formulation and computational aspects. Constitutive laws for engineering materials: Theory and applications,” C. S. Desai et al. (Eds.), Elsevier Science Publishing (1987).
17. J. G. Rots, “Smeared and discrete representations of localized fracture,” Int. J. Fract., 51, 45–59 (1991).10.1007/BF00020852 ↗
18. P. H. Feenstra, “Computational aspects of biaxial in plain and reinforced concrete,” Ph.D. Thesis, Delft University of Technology, The Netherlands (1993).
19. S. Fichant, G. Pijaudier-Cabot, and C. Laborderie, “Continuum damage modeling: Approximation of crack induced anisotropy,” Mech. Res. Commun., 24, No.2, 109–114 (1997).10.1016/S0093-6413(97)00001-3 ↗
20. D. R. J. Owen and E. Hinton, Finite Element in Plasticity. Theory and Practice, Pineridge Press Limited, Swansea, United Kingdom (1980).
21. Y. Labadi, K. Saanouni, and N. E. Hannachi, “Anisotropie induite du dommage avec effet de desactivation/activation,” Annales Maghrebines de l’Ingenieur, 12, 671–675 (1998).
22. A. Al-Ghadib, K. Asad-ur-Raman, and M. Baluch, “CDM based finite element code for concrete in 3-D, ” Comput. Struct., 67, 451–462 (1998).10.1016/S0045-7949(98)00044-3 ↗
23. L. Davenne, C. Saouridis, and J. M. Piau, “Un code de calcul pour la prevision du comportement des structures endommageables en beton, en beton arme, ou en beton de fibres,” Annales de l’ITBTP, 478, 139–155 (1989).
24. M. Arrea and A. R. Ingraffea, Mixed-Mode Crack Propagation in Mortar and Concrete, Department of Structure Engineering, Cornell University, Report 81-13 (1981).
25. E. Shlangen, “Experimental and numerical analysis of fracture process in concrete,” Ph.D. Thesis, Delft University of Technology, The Netherlands (1993).
26. R. De Borst, “Nonlinear analysis of frictional materials,” Ph.D. Thesis, Delft University of Technology, The Netherlands (1986).
27. J. G. Rots, “Removal of finite elements in strain-softening analysis of tensile fracture,” in: Proc. of the Third Conference on Computational Plasticity — Fundamentals and Applications, Pineridge Press (1992), Part I, pp. 669–680.
28. J. Lubliner, J. Oller, S. Oliver, and S. Onate, “A plastic-damage model for concrete,” Int. J. Solids Struct., 25, No.3, 299–326 (1989).10.1016/0020-7683(89)90050-4 ↗
29. A. Rodriguez-Ferran, I. Arbos, and A. Huerta, “Adaptive analysis based on error estimation for nonlocal damage models,” Rev. Euro. Elem. Finis, 10, 193–207 (2001).
30. M. G. D. Geers, R. De Borst, and R. H. J. Peerlings, “Damage and crack modeling in single-edge and double-edge notched concrete beam,” Eng. Fract. Mech., 65, 247–261 (2000).10.1016/S0013-7944(99)00118-6 ↗
31. ABAQUS, User’s Manual, Version 4.8, Hibbit, Karlson and Sorensen, Inc., Palo Ato, California (1990).
32. M. Hassanzadeh, “Behavior of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements,” Ph.D. Thesis, Delft University of Technology, The Netherlands (1991).
33. M. Di Prisco, L. Ferrara, F. Meftah, et al., “Mixed mode fracture in plain and reinforced concrete: some results on benchmark tests,” Int. J. Fracture, 103, 127–148 (2000).10.1023/A:1007613001402 ↗
34. L. Ferrara, “Numerical simulation of mixed-mode fracture in concrete via a non local damage model,” in: Proc. of the second Int. PhD Symposium in Civil Engineering (Budapest 26–28 August) (1998), pp. 1–8.