journal article·2021-01

Impact Resistance Analysis of a Composite Double-Layer Honeycomb Sandwich Structure

G. J. Bi, J. P. Yin, Z. J. Wang, Y. Y. Han, Z. J. Jia

Strength of Materials· Volume 53· Issue 1
Publisher page

Abstract

A composite double-layer honeycomb sandwich structure is proposed to improve the impact resistance of fillers in helicopter rotors, 44 groups of those structures are numerically simulated by LS-DYNA finite element analysis software. An approximate expression for fracture energy of the composite structure is derived. The cell diameter, its wall thickness, and material strength are related to the impact resistance of the structure. With a decrease in the cell diameter and an increase in its wall thickness and material strength, the energy absorption rate of the composite structure is gradually enhanced. Among the 44 composite groups, the structure with the cell diameter of D = 3 mm, the wall thickness of 0.08 mm, and 4340 steel possessed the best energy absorption effect, the energy absorption rate is 54.7% more than for the cell diameter of D = 6 mm and 2024 aluminum. The honeycomb structure composed of various cell diameters has little difference, but it exerts a certain effect on the cell diameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Transportation Safety and Impact Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. J. J. Zhu, Y. Wang, and X. Qing, “Modified electromechanical impedance-based disbond monitoring for honeycomb sandwich composite structure,” Compos. Struct., 217, 175–185 (2019).10.1016/j.compstruct.2019.03.033 ↗
2. S. Dietrich, M. Koch, P. Elsner, et al., “Measurement of sub-surface core damage in sandwich structures using in-situ Hertzian indentation during X-ray computed tomography,” Exp. Mech., 54, 1385–1393 (2014).10.1007/s11340-014-9902-2 ↗
3. C. Menna, A. Zinno, D. Asprone, et al., “Numerical assessment of the impact behavior of honeycomb sandwich structures,” Compos. Struct., 106, 326–339 (2013).10.1016/j.compstruct.2013.06.010 ↗
4. M. R. Yellur, H. Seidlitz, F. Kuke, et al., “A low velocity impact study on press formed thermoplastic honeycomb sandwich panels,” Compos. Struct., 225, 111061 (2019).10.1016/j.compstruct.2019.111061 ↗
5. G. Palomba, V. Crupi, and G. Epasto, “Collapse modes of aluminum honeycomb sandwich structures under fatigue bending loading,” Thin Wall. Struct., 145, 106363 (2019).10.1016/j.tws.2019.106363 ↗
6. A. Kumar, S. Angra, and A. K. Chanda, “Analysis of the effects of varying core thicknesses of Kevlar Honeycomb sandwich structures under different regimes of testing,” Mater. Today- Proc., 21, 1615–1623 (2020).10.1016/j.matpr.2019.11.242 ↗
7. P. Nagasankar, S. B. Prabu, and R. Velmurugan, “Role of different fiber orientations and thicknesses of the skins and the core on the transverse shear damping of polypropylene honeycomb sandwich structures,” Mech. Mater., 91, 252–261 (2015).10.1016/j.mechmat.2015.08.002 ↗
8. Y. J. Wang, Z. J. Zhang, X. M. Xue, et al., “Free vibration analysis of composite sandwich panels with hierarchical honeycomb sandwich core,” Thin Wall. Struct., 145, 106425 (2019).10.1016/j.tws.2019.106425 ↗
9. S. M. H. Hosseini and U. Gabbert, “Numerical simulation of the Lamb wave propagation in honeycomb sandwich panels: A parametric study,” Compos. Struct., 97, 189–201 (2013).10.1016/j.compstruct.2012.09.055 ↗
10. B. G. V. Reddy, K. V. Sharma, and T. Y. Reddy, “Deformation and impact energy absorption of cellular sandwich panels,” Mater. Design, 61, 217–227 (2014).10.1016/j.matdes.2014.04.047 ↗
11. A. Gilioli, C. Sbarufatti, A. Manes, et al., “Compression after impact test (CAI) on NOMEX™ honeycomb sandwich panels with thin aluminum skins,” Compos. Part B-Eng., 67, 313–325 (2014).10.1016/j.compositesb.2014.07.015 ↗
12. A. Pydah and R. C. Batra, “Blast loading of bumper shielded composite two-core Miura-ori/honeycomb core sandwich plates,” Thin Wall. Struct., 129, 45–57 (2018).10.1016/j.tws.2018.03.020 ↗
13. G. Imbalzano, S. Linforth, T. D. Ngo, et al., “Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs,” Compos. Struct., 183, 242–261 (2018).10.1016/j.compstruct.2017.03.018 ↗
14. J. H. Zhang, X. F. Zhu, X. D. Yang, et al., “Transient nonlinear responses of an auxetic honeycomb sandwich plate under impact loads,” Int. J. Impact Eng., 134, 103383 (2019).10.1016/j.ijimpeng.2019.103383 ↗
15. P. Aumjaud, J. E. Fieldsend, M. A. Boucher, et al., “Multi-objective optimisation of viscoelastic damping inserts in honeycomb sandwich structures,” Compos. Struct., 132, 451–463 (2015).10.1016/j.compstruct.2015.05.061 ↗
16. S. I. Fiesler, N. Guzman, K. Hui, et al., “Disbond detection in a composite honeycomb structure of an aircraft vertical stabilizer by fiber Bragg gratings detecting guided ultrasound waves,” P. I. Mech. Eng. C-J. Mec., 231, 3001–3010 (2017).10.1177/0954406217718571 ↗
17. B. S. Kwak, C. Won-Ho, Y. H. Noh, et al., “Nickel-coated glass/epoxy honeycomb sandwich composite for broadband RCS reduction,” Compos. Part B-Eng., 191, 107952 (2020).10.1016/j.compositesb.2020.107952 ↗
18. A. Francesconi, C. Giacomuzzo, F. Feltrin, et al., “An engineering model to describe fragments clouds propagating inside spacecraft in consequence of space debris impact on sandwich panel structures,” Acta Astronaut., 116, 222–228 (2015).10.1016/j.actaastro.2015.07.013 ↗
19. V. Crupi, G. Epasto, and E. Guglielmino, “Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam,” Mar. Struct., 30, 74–96 (2013).10.1016/j.marstruc.2012.11.002 ↗
20. G. Palomba, G. Epasto, V. Crupi, et al., “Single and double-layer honeycomb sandwich panels under impact loading,” Int. J. Impact Eng., 121, 77–90 (2018).10.1016/j.ijimpeng.2018.07.013 ↗
21. C. L. Xin, Q. Z. Xue, J. Tu, et al., Handbook of Common Material Parameters for Finite Element Analysis [in Chinese], China Machine Press, Beijing (2019).
22. I. Lytvynenko, P. Maruschak, O. Prentkovskis, and A. Sorochak, “Modelling kinetics of dynamic crack propagation in a gas mains pipe as cyclic random process,” in: I. Kabashkin, I. Yatskiv, and O. Prentkovskis (Eds.), Reliability and Statistics in Transportation and Communication, Springer, Cham (2018), pp. 262–269.10.1007/978-3-319-74454-4_25 ↗