Experimental Study on the Surface Property Changes of Aluminum Alloy and Stainless Steel after Impingement with Submerged Cavitation Jet
Source abstract
Abstract
With the development of green manufacturing technology, high-pressure cavitation water jet cleaning and shot peening technologies are gradually replacing traditional high-pollution processes. To improve the processing quality and efficiency, three types of metal alloys are impinged with cavitation jet under different processing parameters. By changing the impact time, impact target distance and nozzle form, the impact erosion and peening effects of high-pressure water cavitation jets are studied. The surface micro-topographies of the metal surface under different erosion stages are observed via SEM images. The mechanical behavior, including micro-hardness, residual stress and grain cell structure of the alloy, related to different processing parameters is investigated. It is found that, for the low-strength material Al1060, a cavitation jet can cause its surface damage in a very short time. The stand-off distance has a significant effect on the impact efficiency, and the shape of the nozzle outlet also affects the impact performance. Mechanical properties of Al6061 and 304-stainless steel can be improved under the appropriate impact time. If the processing time and other parameters are properly controlled, the hardness of the metal surface layer rises, and residual compressive stress with a certain depth can be induced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. M. Hashish, “A modeling study of metal cutting with abrasive waterjets,” J. Eng. Mater. Technol., 106, No. 1, 88–100 (1984).10.1115/1.3225682 ↗
2. H. Soyama, C. R. Christopher, and M. R. Hill, “Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel,” J. Mater. Process. Tech., 288, 116877 (2020), https://doi.org/10.1016/j.jmatprotec.2020.116877.10.1016/j.jmatprotec.2020.116877 ↗
3. M. Hashish, “A model for abrasive-waterjet (AWJ) machining,” J. Eng. Mater. Technol., 111, No. 2, 154–162 (1989).10.1115/1.3226448 ↗
4. M. Drzik, L. M. Hlavac, V. Madr, et al., “Relief produced by abrasive water jet and its visualization by contactless optical method,” in: Proc. of the SPIE, Vol. 5445, 376–379 (2004), 10.1117/12.560687.10.1117/12.560687 ↗
5. M. Hashish, “An investigation of milling with abrasive-waterjets,” J. Eng. Ind., 111, No. 2, 158–166 (1989).10.1115/1.3188745 ↗
6. M. Hashish, “Characteristics of surfaces machined with abrasive-waterjets,” J. Eng. Mater. Technol., 113, No. 3, 354–362 (1991).10.1115/1.2903418 ↗
7. S. C. Howard, F. C. Graham, Jr., A. A. Hochrein, et al., Research and Development of a Cavitating Water Jet Cleaning System for Removing Marine Growth and Fouling from US Navy Ship Hulls, No. DAI-SCH-7759-001-TR, Daedalean Associates Inc., Woodbine, MD (1978).
8. H. Soyama and M. Mikami, “Improvement of fatigue strength of stainless steel by using a cavitating jet with an associated water jet in water,” Key Eng. Mater., 353–358, 162–165 (2007).10.4028/www.scientific.net/KEM.353-358.162 ↗
9. H. Soyama, M. Shimizu, Y. Hattori, et al., “Improving the fatigue strength of the elements of a steel belt for CVT by cavitation shotless peening” J. Mater. Sci., 43, No. 14, 5028–5030 (2008).10.1007/s10853-008-2743-6 ↗
10. H. Soyama and F. Takeo, “Comparison between cavitation peening and shot peening for extending the fatigue life of a duralumin plate with a hole,” J. Mater. Process. Tech., 227, 80–87 (2016).10.1016/j.jmatprotec.2015.08.012 ↗
11. H. Soyama, T. Kusaka, and M. Saka, “Peening by the use of cavitation impacts for the improvement of fatigue strength,” J. Mater. Sci. Lett., 20, No. 13, 1263–1265 (2001).10.1023/A:1010947528358 ↗
12. H. Soyama and D. O. Macodiyo, “Fatigue strength improvement of gears using cavitation shotless peening,” Tribol. Lett., 18, No. 2, 181–184 (2005).10.1007/s11249-004-1774-7 ↗
13. H. Soyama and Y. Sekine, “Sustainable surface modification using cavitation impact for enhancing fatigue strength demonstrated by a power circulating-type gear tester,” Int. J. Sustain. Eng., 3, No. 1, 25–32 (2010).10.1080/19397030903395174 ↗
14. D. O. Macodiyo and H. Soyama, “Optimization of cavitation peening parameters for fatigue performance of carburized steel using Taguchi methods,” J. Mater. Process. Tech., 178, 234–240 (2006).10.1016/j.jmatprotec.2006.03.172 ↗
15. Y. Sekine and H. Soyama, “Evaluation of the surface of alloy tool steel treated by cavitation shotless peening using an eddy current method,” Surf. Coat. Technol., 203, No. 16, 2254–2259 (2009).10.1016/j.surfcoat.2009.02.018 ↗
16. A. Marcon, S. N. Melkote, and M. Yoda, “Effect of nozzle size scaling in co-flow water cavitation jet peening,” J. Manuf. Process., 31, 372–381 (2018).10.1016/j.jmapro.2017.12.002 ↗
17. M. Ijiri, D. Shimonishi, D. Nakagawa, et al., “New water jet cavitation technology to increase number and size of cavitation bubbles and its effect on pure Al surface,” Int. J. Lightweight Mater. Manuf., 1, No. 1, 12–20 (2018).