journal article·2004-05

A Mixed-Approach Analysis of Deformations in Pipe Bends. Part 1. Saint-Venant Three-Dimensional Bending

I. V. Orynyak, S. A. Radchenko

Strength of Materials· Volume 36· Issue 3
Publisher page

Abstract

A new method for analysis of stress-strain state in elastic cylindrical toroidal shells is put forward, whereby forces and displacements are chosen as unknown functions. The method enables a study of the bend ovalization phenomenon that occurs when three-dimensional bending moments are applied. The authors have derived geometrical equations relating displacement components and strains, and introduced smallness hypothesis, which makes it possible to neglect some combinations of displacements during the shell deformation analysis. The Karman hypothesis of nondeformability of a pipe median surface is demonstrated to be applicable only after the circumferential force is excluded from equilibrium equations. The authors have established the limits of applicability of the solutions obtained, depending on the order of approximation of the flexibility parameter. Beam differential equations have been derived for a curvilinear bar, which relate angles of rotation and center-line displacements with applied loading factors. The results obtained are compared to those reported elsewhere.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Integrity and Reliability Analysis · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Th. Karman, "Über die Formänderung dünnwandiger Rohre, insbesondere federnder Ausgleichrohre," Z. Ver. de ut. Ing., 55, 1889–1895 (1911).
2. L. G. Brazier, "On the flexure of thin cylindrical shells and other thin sections," Pros. Roy. Soc. Ser. A., 116, No. 773, 104–114 (1927).
3. É. L. Aksel’rad, Flexible Shells [in Russian], Nauka, Moscow (1976).
4. É. L. Akselrad and V. P. Il’in, Design of Pipelines [in Russian], Mashinostroenie, Moscow (1972).
5. D. L. Kostovetskii, Strength of Piping Systems of Power Plants [in Russian], Énergiya, Leningrad (1973).
6. V. V. Kuznetsov and S. V. Levyakov, "Nonlinear pure bending of toroidal shells of arbitrary cross section," Int. J. Sol. Struct., 38, 7343–7354 (2001).10.1016/S0020-7683(00)00411-X ↗
7. M. A. Shalaby and M. Y. A. Younan, "Effect of internal pressure on elastic-plastic behaviour of pipe elbows under in-plane loading," J. Press. Vess. Tech., 121, 400–406 (1999).10.1115/1.2883722 ↗
8. H. M. Mourad and M. Y. A. Younan, "Limit-load analysis of pipe bends under out-of-plane moment loading and internal pressure," J. Press. Vess. Tech., 124, 32–37 (2002).10.1115/1.1425807 ↗
9. S. A. Karamanos, "Bending instabilities of elastic tubes," Int. J. Sol. Struct., 39, 2059–2085 (2002).10.1016/S0020-7683(02)00085-9 ↗
10. R. S. Ming, J. Pan, and M. P. Norton, "Free vibrations of elastic circular toroidal shells," Appl. Acoustics, 63, 513–528 (2002).10.1016/S0003-682X(01)00051-2 ↗
11. D. Redecop, "Dynamic response of curved pipes," Int. J. Press. Vess. & Piping, 70, 167–172 (1997).10.1016/S0308-0161(96)00027-0 ↗
12. D. Redecop, "Dynamic response of short curved pipes to impulsive loading," Int. J. Press. Vess. & Piping, 61, 41–47 (1995).10.1016/0308-0161(94)P3698-L ↗
13. D. Huang, D. Redekop, and B. Xu, "Natural frequencies and mode shapes of curved pipes," Comp. Struct., 63, No. 3, 465–473 (1977).10.1016/S0045-7949(96)00365-3 ↗
14. R. Natarajan and S. Mirza, "Effect of internal pressure on flexibility factors in pipe elbows with end constraints," J. Press. Vess. Techn., 107, 60–63 (1985).10.1115/1.3264406 ↗
15. I. V. ÎOrynyak, "First approximation to elastic analysis of end-effects in pipe bends," Int. J. Press. Vess. & Piping, 72, No. 2, 157–164 (2002).10.1016/S0308-0161(01)00135-1 ↗
16. E. M. M. Fonseca, F. J. M. Q. Melo, and C. A. M. Oliveira, "Determination of flexibility factors in curved pipes with end restraints using a semi-analytic formulation," Int. J. Press. Vess. & Piping, 79, 829–840 (2002).10.1016/S0308-0161(02)00102-3 ↗
17. R. A. Clark and E. Reissner, "Bending of curved tubes," Adv. Appl. Mech., 2, 93–122 (1951).10.1016/S0065-2156(08)70299-0 ↗
18. Y. M. Zhang, P. Mirfakhraei, B. Xu, and D. Redekop, "A computer program for the elastostatics of a toroidal shell using the differential quadrature method," Int. J. Press. Vess. & Piping, 75, 919–929 (1998).10.1016/S0308-0161(98)00092-1 ↗
19. I. V. Orynyak, Ya. S. Marchuk, and S. A. Radchenko, "A solution for an elastic pipe bend based on the plane-section hypothesis," Vestn. Natsion. Tekhn. Univ. Ukrainy (KPI), 43, 60–67 (2002).
20. PNAÉ G-7-002-86. Safety Requirements of Strength Analysis of the Equipment and Pipelines of Nuclear Power Plants [in Russian], Énergoatomizdat, Moscow (1989).
21. SNiP 2.04. 12-86. Stress Analysis of Steel Pipelines [in Russian], TsITP Gosstroya SSSR (1986).
22. A. S. Vol’mir, Stability of Deformable Systems [in Russian], Nauka, Moscow (1967).
23. D. Redecop and B. Xu, "Vibration analysis of toroidal panels using the differential quadrature method," Thin-Walled Struct., 34, 217–231 (1999).10.1016/S0263-8231(99)00010-5 ↗
24. A. G. Kamershtein, V. V. Rozhdestvenskii, and M. N. Ruchimskii, Strength Analysis of Pipelines. Handbook [in Russian], Nedra, Moscow (1969).
25. K. J. Bathe and C. A. Almeida, "A simple and effective pipe elbow element-linear analysis," J. Appl. Mech., 47, 93–100 (1980).10.1115/1.3153645 ↗
26. D. Meckenzie and R. Bell, "A simple pipe bend element for piping flexibility analysis," Int. J. Press. Vess. & Piping, 51, No. 1, 85–106 (1992).10.1016/0308-0161(92)90007-3 ↗
27. L. Sobel, "In-plane bending of elbows," Comp. Struct., 7, 701–715 (1977).10.1016/0045-7949(77)90024-4 ↗
28. H. Ohtsubo and O. Watanabe, "Flexibility and stress factors of pipe bends-an analysis by finite ring method," J. Press. Vess. Tech., 99, 281–290 (1977).10.1115/1.3454533 ↗
29. R. T. Smith and H. Ford, "Experiments on pipelines and pipe bends subject to three-dimensional loading," J. Mech. Eng. Sci., 9, 124–137 (1967).10.1243/JMES_JOUR_1967_009_021_02 ↗