Investigation of structural conditions for improving the characteristics of strength, plasticity, and fracture toughness of maraging steels
Source abstract
Abstract
The structural parameters governing the embrittlement and plasticizing of stainless (Kh12N10MT, Kh11N10M2T, and Kh13N9D2MT) and high-strength (N18M3T and N18K9M5T) maraging steels are analyzed; they are varied by thermal-kinetic conditions, the sequence and multiplicity of various heat-treatment processes such as austenitization, age hardening, and α↔γ-phase transformation in the subcritical temperature range. We justified both the individual and joint influence of austenite grain size and volume fraction of particles of intermediate phases on the regularities of variation and correlation of characteristics of strength, plasticity, and fracture toughness during thermal hardening. We revealed the role of the austenite which is formed during the α→γ-phase transformation in the increased deformability and fracture toughness of the steels under study, taking into account the character of their alloying. Based on the revealed shift in the temperature range of the α→γ-phase re-transformation toward the temperature range of age hardening, we determined the structural conditions for implementing its plastizicing effect on the high-strength state of the maraging steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. T. M. Golovinskaya, S. B. Nizhnik, G. I. Usikova, and N. I. Chernyak, “Structure and mechanical properties of maraging steel under thermal hardening conditions,”Izv. AN SSSR. Metals, No. 3, 183–187 (1980).
2. G. I. Usikova, “On structural sensitivity of plasticity characteristics of maraging steels strengthened by aging,”Fiz.-Khim. Mekh. Mater., No. 6, 49–53 (1981).
3. S. B. Nizhnik, V. P. Ostrovskaya, and G. I. Usikova, “Structural changes and mechanical properties of 00Kh11N10M2T maraging steel upon α→γ-phase transformation,”Fiz. Met. Metalloved.,53, No. 1, 76–81 (1981).
4. S. B. Gladkovskii, A. M. Fillipov, A. Yu. Kaletin, et al., “Effect of austenization modes on mechanical characteristics and fracture specifics of maraging steels,”Fiz. Met. Metalloved.,78 No. 2, 159–169 (1994).
5. J. M. Krafft and J. Irvin, “Considerations on crack propagation rates,” in:Applied Problems of Fracture Toughness [Russian translation], Mir, Moscow (1968).
6. G. T. Hahn and A. R. Rosenfield, “Sources of fracture toughness,” in:Applied Phenomena in Titanium Alloys, ASTM STR, No. 432, 5–32 (1968).
7. V. V. Panasyik, A. E. Andreikiv, and S. E. Kovchik, “Determination ofK lc, of structural materials by their mechanical characteristics and structural parameters,”Fiz-Khim. Mekh. Mater.,13, No. 2, 120–122 (1977).
8. A. Ya. Krasovskii,Brittleness of Metals at Low Temperatures [in Russian], Naukova Dumka, Kiev (1980).
9. A. Ya. Krasovskii and G. Pluvinage, “Structural parameters governing fracture toughness of engineering materials,”Fiz.-Khim. Mekh. Mater.,29, No. 3, 111–124 (1993).
10. A. A. Kaminskii and S. B. Nizhnik, “Study of the regularities of plastic zone variation near the crack edge and dependence of fracture toughness characteristics of metal materials on their structure (review),”Prikl. Mekh.,31, No. 10, 3–27 (1995).
11. S. A. Saltykov,Stereometric Metallography [in Russian], Metallurgiya, Moscow (1970).
12. A. H. Cottrell, “Theory of brittle fracture in steel and similar metals,”Trans. Metal. Soc. AIME,212, No. 2, 192–203 (1958–59).
13. V. I. Trefilov, V. F. Moiseev, and É. P. Pechkovskii,Strain Hardening and Fracture of Polycrystalline Metals [in Russian], Naukova Dumka, Kiev (1987).
14. S. Ansell, “Mechanical properties of two-phase alloys,” in: Z. Kan, (Ed.),Physical Metal Science, [Russian translation], Vol. 3, Mir, Moscow (1968).
15. O. N. Romaniv, A. N. Tkach, Ya. N. Gladkii, and Yu. V. Zima, “Application of overheat in tempering for the improvement of fracture toughness of high-strength steels,”Fiz.-Khim. Mekh. Mater.,12, No. 5, 41–48 (1976).
16. V. Dal' and V. Anton,Static Strength and Fracture Mechanics of Steel [in Russian], Metallurgiya, Moscow (1986).
17. S. B. Nizhnik, B. I. Koval'chuk, V. P. Ostrovskaya et al., “Method of thermal treatment for components of cryogenic equipment made of maraging steels,” USSR Inventor's Certificate No. 1423609, Bulletin No. 34, Published 15. 09. 1988.
18. F. F. Giginyak, A. A. Lebedev, and A. Ya. Krasowskii, “Effect of stressed state on strain hardening of low-carbon steel,”Metalloved. Term. Obrab. Metal., No. 4, 33–36 (1971).
19. N. I. Chernyak, S. B. Nizhnik, V. N. Bastun, É. S. Istomina, and G. I. Usikova, “On the dependence of structural parameters of austenitic steel on the stressed-state type,”Dokl. AN USSR, Ser. A, No. 3, 171–174 (1973).