Constitutive Equations and Processing Maps for 49MnVS3 Non-quenched and Tempered Steel
Source abstract
Abstract
Flow stress variations of 49MnVS3 non-quenched and tempered steel are studied in isothermal compression tests on a Gleeble-1500D thermal simulated test machine at a deformation temperatures of 950, 1,000, 1,150, and 1,200 °C, and strain rates of 0.1, 1, 5, and 10 s −1 , with obtaining the strain hardening exponent n and deformation activation energy Q of the alloy. Thus, the constitutive equations and processing maps of compression flow behavior for 49MnVS3 non-quenched and tempered steel at high temperatures are established. It shows that the peak stress is shownto significantly reduced with a decrease in the strain rate and increase in deformation temperature when the alloy deforms at high temperature, and the deformation activation energy is 350.98 kJ/mol. When the true strain of 49MnVS3 non-quenched and microalloyed steel high-temperature deformation is 0.5, the optimum process parameters of the alloy are determined to be 1,150–1,200 °C for the deformation temperature and 2–10 s −1 for the strain rate, based on the criterion that the process parameters of higher power dissipation efficiency values should be chosen in the dynamic recrystallization region as the best processing technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. J. Ding, “Present situation of application and development of microalloyed steel for automobile,” Heat Treat. Metals, 31, No. 9, 46–48 (2006).
2. Zhaojiu Gen, Miao Yong, Tangxin Min, and Chenjian Ye, “Development of a microalloy steel for vehicle front axle,” Auto. Technol. Mater., 7, 15–17 (2000).
3. X. M. Tang, J. Y. Chen, J. G. Zhao, et al., “Development and application of non-quenched and tempered steels of bending and extending arms,” Heat Treat. Metals, 1, 45–47 (2001).
4. H. Shi, A. J. McLaren, C. M. Sellars, et al., “Constitutive equations for high temperature flow stress of aluminum alloys,” Mater. Sci. Technol., 13, 210–216 (1997).10.1179/mst.1997.13.3.210 ↗
5. A. Laasraoui and J. J. Jonas, “Recrystallization of austenite after deformation at high temperature and strain rates-analysis and modeling,” Metall. Trans., 22A, 151–160 (1991).10.1007/BF03350957 ↗
6. A. Laasraoui and J. J. Jonas, “Prediction of steel flow stresses at high temperatures and strain rates,” Metall. Trans., 22A, No. 7, 1545–1558 (1991).10.1007/BF02667368 ↗
7. C. M. Sellars, “Computer modelling of hot-working processes,” Mater. Sci. Technol., 1, No. 4, 325–332 (1985).10.1179/mst.1985.1.4.325 ↗
8. C. M. Sellars and W. J. McTegart, “On the mechanism of hot deformation,” Acta Metall., 14, No. 9, 1136–1138 (1966).10.1016/0001-6160(66)90207-0 ↗
9. C. M. Sellars, “Modeling microstructural development during hot rolling,” Mater. Sci. Technol., 6, 1072–1081 (1990).10.1179/mst.1990.6.11.1072 ↗
10. Z. M. Zhang, B. C. Yang, K. L. Liu, et al., “Numerical simulation of alloy ZTC4 can isothermal extrusion,” J. Plasticity Eng., 11, No. 3, 31–34 (2004).
11. Y. V. R. K. Prasad and S. Sasidhara, Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, OH (1997).
12. B. Bozzini and E. Cerri, “Numerical reliability of hot working processing maps,” Mater. Sci. Eng. A, 328, No. 1-2, 344–347 (2002).10.1016/S0921-5093(01)01686-0 ↗
13. Y. V. R. K. Prasad and T. Seshacharyulu, “Modelling of hot deformation for microstructure control,” Int. Mater. Rev., 43, No. 6, 243–258 (1998).10.1179/imr.1998.43.6.243 ↗
14. R. Raj, “Development of a processing map for use in warm-forming and hot-forming processing,” Metall. Trans., 12, No. 6, 1089–1097 (1981).10.1007/BF02643490 ↗