journal article·2018-05

Fracture Analysis of a Three-Dimensional Functionally Graded Multilayered Beam

V. I. Rizov

Strength of Materials· Volume 50· Issue 3
Publisher page

Abstract

Delamination fracture behavior of the three-dimensional functionally graded multilayered crack lap shear (CLS) beam configuration was studied analytically in terms of the strain energy release rate with linear-elastic fracture mechanics methods. The CLS under consideration can consist of an arbitrary number of layers, each having different thickness and material properties. The material of each layer is functionally graded along its width, thickness, and length. A delamination crack is arbitrarily located along the beam height. The strain energy release rate was derived by analyzing its density in the beam cross section ahead and behind the crack front. It was additionally analyzed using the strain energy release rate was performed by using the beam strain energy for verification. The effect of the material gradient and crack location along the beam height on the delamination fracture behavior was evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Numerical methods in engineering · Fatigue and fracture mechanics · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. M. Koizumi, “The concept of FGM,” Ceram. Trans. Funct. Grad. Mater., 34, 3–10 (1993).
2. A. Mortensen and S. Suresh, “Functionally graded metals and metal-ceramic composites: Part 1 Processing,” Int. Mater. Rev., 40, No. 6, 239–265 (1995).10.1179/imr.1995.40.6.239 ↗
3. A. Neubrand and J. Rödel, “Gradient materials: An overview of a novel concept,” Z. Metallkd., 88, 358–371 (1997).
4. S. Suresh and A. Mortensen, Fundamentals of Functionally Graded Materials, IOM Communications Ltd, London (1998).
5. T. Hirai and L. Chen, “Recent and prospective development of functionally graded materials in Japan,” Mater Sci. Forum, 308–311, 509–514 (1999).10.4028/www.scientific.net/MSF.308-311.509 ↗
6. M. M. Gasik, “Functionally graded materials: bulk processing techniques,” Int. J. Mater. Prod. Tec., 39, 20–29 (2010).10.1504/IJMPT.2010.034257 ↗
7. M. M. Nemat-Allal, M. H. Ata, M. R. Bayoumi, and W. Khair-Eldeen, “Powder metallurgical fabrication and microstructural investigations of aluminum/steel functionally graded material,” Mater. Sci. Appl., 2, 1708–1718 (2011).
8. S. K. Bohidar, R. Sharma, and P. R. Mishra, “Functionally graded materials: A critical review,” Int. J. Res., 1, 289–301 (2014).
9. A. Szekrényes, “Delamination fracture analysis in the GII–GIII plane using prestressed composite beams,” Int. J. Solids Struct., 44, 3359–3378 (2007).10.1016/j.ijsolstr.2006.09.029 ↗
10. A. Szekrényes, “The influence of crack length and delamination width on the mode-III energy release rate of laminated composites,” J. Compos. Mater., 45, No. 3, 279–294 (2011).10.1177/0021998310376097 ↗
11. A. Szekrényes, “Semi-layerwise analysis of laminated plates with nonsingular delamination – The theorem of autocontinuity,” Appl. Math. Model., 40, No. 2, 1344–1371 (2016).10.1016/j.apm.2015.06.037 ↗
12. F. Erdogan, “Fracture mechanics of functionally graded materials,” Compos. Eng., 5, No. 7, 753–770 (1995).10.1016/0961-9526(95)00029-M ↗
13. G. H. Paulino, “Fracture of functionally graded materials,” Eng. Fract. Mech., 69, Nos. 14–16, 1519–1520 (2002).10.1016/S0013-7944(02)00045-0 ↗
14. M. T. Tilbrook, R. J. Moon, and M. Hoffman, “Crack propagation in graded composites,” Compos. Sci. Technol., 65, No. 2, 201–220 (2005).10.1016/j.compscitech.2004.07.004 ↗
15. A. Carpinteri and N. Pugno, “Cracks in re-entrant corners in functionally graded materials,” Eng. Fract. Mech., 73, No. 10, 1279–1291 (2006).10.1016/j.engfracmech.2006.01.008 ↗
16. A. K. Upadhyay and K. R. Y. Simha, “Equivalent homogeneous variable depth beams for cracked FGM beams; compliance approach,” Int. J. Fracture, 144, 209–213 (2007).10.1007/s10704-007-9089-y ↗
17. S.-D. Pan, J.-C. Feng, Z.-G. Zhou, and L.-Z. Wu, “Four parallel non-symmetric mode-III cracks with different lengths in a functionally graded material plane,” Strength Fract. Compl., 5, Nos. 3–4, 143–166 (2009).10.3233/SFC-2009-0098 ↗
18. G. A. Korn and T. M. Korn, Mathematical Handbook for Scientists and Engineers, McGraw-Hill, New York (1961).
19. N. E. Dowling, Mechanical Behavior of Materials, Pearson (2007).
20. J. W. Hutchinson and Z. Suo, “Mixed mode cracking in layered materials,” Adv. Appl. Mech., 29, 63–191 (1991).10.1016/S0065-2156(08)70164-9 ↗