Modeling of Three-Dimensional Stress-Strain State and Strength Analysis of Metal Composite Cylinders under Impulsive Loading Using the Conwep Method
Source abstract
Abstract
The application package previously developed at the Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine for the numerical calculation of the dynamic non-axisymmetric three-dimensional stress-strain state and strength of multilayer helically orthotropic cylinders of finite length under impulsive loading was modified by the CONWEP method for load due to the explosion of a spherical explosive charge arbitrarily located in air inside a cylinder. Its accuracy was investigated by the variation of grid size, the number of the terms of Fourier expansions of unknowns, boundary conditions, charge coordinates and other input parameters. The three-dimensional dynamics and strength of composite and metal-composite cylinders loaded by a non-axisymmetric internal explosion were studied. Strength was determined by the generalized Mises criterion. The influence of displacement of the explosive charge relative to the center of symmetry of the cylinder along the radius and axis on stress-strain state and strength was studied. It is shown that at the constant relative mass of the charge, metal-composite cylinders can be made equally strong by increasing the thickness of the metal layer from zero to a quarter of the shell thickness, while increasing the mass of the charge by a factor of almost two. The inefficiency of the use of reinforced composites with low ultimate tensile strength across fibers in such structural elements has been established. It is shown that in some cases adding an outer composite layer to the inner steel shell leads not to an increase but on the contrary to a decrease in the strength of the object as a whole.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Applications · Environmental and Industrial Safety · Elasticity and Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. P. P. Lepikhin and V. A. Romashchenko, Durability of Inhomogeneous Anisotropic Hollow Cylinders under Pulse Loading [in Russian], Naukova Dumka, Kiev (2014).
2. P. P. Lepikhin, V. A. Romashchenko, and O. S. Beiner, “A numerical study of 3D dynamics and strength of metal-composite cylinders under internal explosion loading,” Strength Mater., 49, No. 6, 796–808 (2017).10.1007/s11223-018-9925-5 ↗
3. P. P. Lepikhin, V. A. Romashchenko, and O. S. Beiner, “Theoretical investigation of fracture in stress waves of anisotropic cylinder under internal explosion,” Strength Mater., 48, No. 5, 615–631 (2016).10.1007/s11223-016-9805-9 ↗
4. P. P. Lepikhin, V. A. Romashchenko, O. S. Beiner, et al., “A program for numerical calculation of dynamic stress-strain state and strength of hollow multilayer anisotropic cylinders and spheres. Part 2. Comparison of numerical results with experimental and theoretical for cylinders,” Strength Mater., 47, No. 3, 406–414 (2015).10.1007/s11223-015-9671-x ↗
5. V. A. Romashchenko, “Limitations of some strength criteria for composite materials,” Strength Mater., 51, No. 6, 828–833 (2019).10.1007/s11223-020-00131-8 ↗
6. M. J. Hinton, A. S. Kaddour, and P. D. Soden (Eds.), Failure Criteria in Fibre-Reinforced Polymer Composites: The World-Wide Failure Exercise, Elsevier, Amsterdam (2004).
7. P. P. Lepikhin, V. A. Romashchenko, O. S. Beiner, et al., “A program for numerical calculation of dynamic stress-strain state and strength of hollow multilayer anisotropic cylinders and spheres. Part 1. Program description,” Strength Mater., 47, No. 2, 249–256 (2015).10.1007/s11223-015-9655-x ↗
8. V. V. Adishchev, V. M. Kornev, and L. A. Talzi, Estimation of Maximum Stresses in Closed Cylindrical Vessels under Asymmetric Explosion Loading [in Russian], Research Report, Institute of Mining, Siberian Branch of the Academy of Sciences of USSR, Novosibirsk (1983).
9. N. A. Abrosimov, “Numerical research of axisymmetric deformation of composite shells of rotation under impulse effects,” Mekh. Kompoz. Mater., No. 4, 647–653 (1987).
10. P. P. Lepikhin, V. A. Romashchenko, S. A. Tarasovskaya, and V. G. Korbach, “Range of the applicability of the Wilkins method to the investigation of the dynamic stress-strain state of anisotropic elastic axisymmetric shells,” Strength Mater., 35, No. 1, 52–59 (2003).10.1023/A:1022921421342 ↗
11. N. A. Abrosimov and A. V. Elesin, “Numerical analysis of the reinforcement structure influence on the dynamic behavior of composite cylindrical shells under explosive loading,” Probl. Prochn. Plastichn., 74, 78–83 (2012).
12. N. A. Abrosimov, A. V. Elesin, L. N. Lazarev, and N. A. Novosel’tseva, “Numerical analysis of the strength of fiberglass cylindrical shells of different structures under impulse loading,” Prikl. Probl. Prochn. Plastichn., 75, No. 4, 288–295 (2013).
13. N. A. Abrosimov, A. V. Elesin, and N. A. Novosel’tseva, “Numerical analysis of reinforcement structure influence on dynamic behavior and limit deformability of the composite shells of rotation,” Mekh. Kompoz. Mater., 50, No. 2, 313–326 (2014).
14. N. A. Abrosimov, A. V. Elesin, and S. A. Pirogov, “Numerical analysis of the non-axisymmetric deformation and progressive destruction of the layered composite cylindrical shells under impulse loading,” Probl. Prochn. Plastichn., 77, No. 1, 23–32 (2015).
15. N. A. Abrosimov and A. V. Elesin, “Numerical analysis of the dynamic strength of the composite cylindrical shells under multiple pulse loading,” Vestn. PNIPU. Mekhanika, No. 4, 7–19 (2016).
16. C. N. Kingery and G. Bulmash, Air-Blast Parameters from TNT Spherical Air Burst and Hemispherical Surface Burst, Technical Report ARBRL-TR-02555, U.S. Army Ballistic Research Laboratory, Aberdeen Proving Ground, Maryland (1984).
17. TM-5-855-1. Fundamentals of Protective Design for Conventional Weapons, Headquarters, Department of the Army, Washington, DC (1986).
18. TM 5-1300. Structures to Resist the Effects of Accidental Explosions, U.S. Department of the Army (1990).
19. UFC 3-340-02. Structures to Resist the Effects of Accidental Explosions, U.S. Army Corps of Engineers, Naval Facilities Engineering Command, Air Force Civil Engineer Support Agency (2008).
20. IATG 01.80. Formulae for Ammunition Management, United Nations, New York (2015).
21. D. W. Hyde, User’s Guide for Microcomputer Program CONWEP, Application of TM-5-855-1, Fundamentals of Protective Design for Conventional Weapons (1992).
22. G. Randers-Pehrson and K. A. Bannister, Airblast Loading Model for DYNA2D and DYNA3D, Technical Report ARL-TR-1310, Army Research Laboratory (1997).
23. M. Ya. Vygodskii, Handbook of Higher Mathematics [in Russian], Fizmatlit, Moscow (1959).
24. V. A. Romashchenko, O. S. Beiner, and Yu. N. Babich, “Numerical-analytical method for 3D dynamics study of spirally orthotropic multilayer cylinders,” Strength Mater., 43, No. 4, 438–446 (2011).10.1007/s11223-011-9313-x ↗
25. V. A. Romashchenko and O. S. Beiner, “Numeric simulation of three-dimensional dynamics and strength of multilayered spirally orthotropic cylinders,” Strength Mater., 44, No. 2, 187–195 (2012).10.1007/s11223-012-9371-8 ↗
26. V. A. Romashchenko, Yu. N. Babich, and E. V. Bakhtina, “Strength assessment for composite and metal-composite cylinders under pulse loading. Part 2. Numerical evaluation of strength for multilayer cylinders of finite length under internal explosion,” Strength Mater., 44, No. 5, 502–511 (2012).10.1007/s11223-012-9403-4 ↗
27. S. W. Tsai and E. M. Wu, “A general theory of strength for anisotropic materials,” J. Compos. Mater., 5, No. 1, 58–80 (1971).10.1177/002199837100500106 ↗
28. L. J. Broutman and R. H. Krock (Eds.), Composite Materials, in 8 volumes, Vol. 2: J. Sendeckyi (Ed.), Mechanics of Composite Materials, Academic Press, New York (1974).
29. G. P. Zhao and C. D. Cho, “Damage initiation and propagation in composite shells subjected to impact,” Compos. Struct., 78, 91–100 (2007).10.1016/j.compstruct.2005.08.013 ↗
30. V. A. Romashchenko, “Strength assessment for composite and metal-composite cylinders under pulse loading. Part 1. Rules of choosing various strength criteria for anisotropic material and comparative analysis of such criteria,” Strength Mater., 44, No. 4, 376–387 (2012).10.1007/s11223-012-9391-4 ↗
31. V. A. Romashchenko, “On six-dimensional quadric hyperspace of strength for orthotropic materials,” Strength Mater., 46, No. 1, 57–63 (2014).10.1007/s11223-014-9515-0 ↗
32. V. T. Troschenko, A. Ya. Krasovskii, V. V. Pokrovskii, et al., Resistance of Materials to Deformation and Damage [in Russian], Part 1, Naukova Dumka, Kiev (1993).
33. G. M. Fichtengolts, The Course of Differential and Integral Calculus [in Russian], Vol. 3, Nauka, Moscow (1969).