Deformation Relief of the Surface as a Characteristic of Fatigue Damage of Clad Aluminum Alloys. Part 2. Fatigue Degradation of a Cladding Layer
Source abstract
Abstract
The cladding of aircraft aluminum alloys for their corrosion protection will deteriorate the fatigue strength. This phenomenon can be explained by more intensive plastic deformation and loosening (degradation) of the cladding layer as compared to the base material. A phenomenological model is proposed to describe the degradation that is based on the concept of the change in the cladding layer volume with its surface area due to the formation and evolution of the deformation relief. An increase in the volume may be associated with the accumulation of continuity defects (microcracks, pores) in the surface layer, which initiate the fatigue cracks in the base material. A relative increase in the material volume is characterized by the degradation measure, which is determined by the surface plastic strain and ratio fractal parameter equal to the deformation relief area – their perimeter. Within the proposed model and the change in the cladding layer degradation with the surface saturation a deformation relief clusters was investigated available experimental data. The degradation measure against saturation is described by power, functions and has two sections. The degradation intensity starts growing when the deformation relief clusters occupy approximately 25% of the surface area. The intensification of degradation becomes more pronounced if represented as its measure against the area–perimeter ratio of the deformation relief clusters. It gives grounds to advance the fractal parameter as a diagnostic characteristic of cladding layer damageability under cyclic loading at the stage preceding the fatigue crack nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Applications · Aluminum Alloy Microstructure Properties · Industrial Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. J. Schijve, F. A. Jacobs, and P. J. Tromp, The Significance of Cladding for Fatigue of Aluminium Alloys in Aircraft Structures, Report NLR TR76065 U, National Aerospace Laboratory NLR (1976).
2. L. V. Agamirov (Ed.), Strength of Machines and Structures at Variable Loads [in Russian], MATI, Moscow (2001).
3. A. T. Pankov, Effect of the Cladding Layer on the Strength Characteristics of Structural Aluminum Alloys and Efficiency of Their Corrosion Protection [in Russian], Author’s Abstract of the Candidate Degree Thesis (Tech. Sci.), Kiev (1975).
4. S. R. Ignatovich and M. V. Karuskevich, Monitoring of the Fatigue Life of Aircrafts [in Russian], NAU, Kyiv (2014).
5. A. V. Karlashov, R. G. Gainutdinov, and Zh. Baishumurov, “Effect of the thickness of the cladding layer on the fatigue and corrosion-fatigue life of aluminum alloy sheet material,” Mater. Sci., 11, No. 4, 418–420 (1975).10.1007/BF00715443 ↗
6. R. J. H. Wanhill, Effects of Cladding and Anodising on Flight Simulation Fatigue of 2024-T3 and 7475-T761 Aluminium Alloys, Report NLR TR 85006 L, National Aerospace Laboratory NLR (1985).
7. J. C. Newman, Jr., X. R. Wu, S. L. Venneri, and C. G. Li, Small-Crack Effects in High-Strength Aluminum Alloys, NASA Reference Publication 1309, NASA (1994).
8. S. R. Ignatovich, V. N. Shmarov, and S. S. Yutskevich, “Features of the deformation relief formation on the surface of a D16AT alloy on fatigue,” Aviats.-Kosm. Tekhn. Tekhnol., No. 10, 132–136 (2009).
9. V. M. Goritskii and V. F. Terent’ev, Structure and Fatigue Fracture of Metals [in Russian], Metallurgiya, Moscow (1980).
10. S. Kotsan’da, Fatigue Cracking of Metals [in Russian], Metallurgiya, Moscow (1990).
11. O. G. Rybakina and Ya. S. Sidorin, “Experimental study on the plastic loosening mechanism of metals,” Inzh. Zhurn. Mekh. Tverd. Tela, No. 1, 120–124 (1966).
12. V. I. Betekhtin, V. I. Vladimirov, A. G. Kadomtsev, and A. I. Petrov, “Plastic strain and fracture of crystalline bodies. Communication 1. Strain and microcrack propagation,” Strength Mater., 11, No. 7, 708–715 (1979), https://doi.org/10.1007/BF00770352.10.1007/BF00770352 ↗
13. S. R. Ignatovich, M. V. Karuskevich, and S. S. Yutskevich, “Deformation relief of the surface as a characteristic of fatigue damage of clad aluminum alloys. Part 1. Deformation relief evolution under cyclic loading,” Strength Mater., 52, No. 5, 707–714 (2020), https://doi.org/10.1007/s11223-020-00223-5.10.1007/s11223-020-00223-5 ↗
14. S. R. Ignatovich and S. S. Yutskevich, “Fatigue control of a D16AT alloy by deformation surface relief characteristics,” Fiz.-Khim. Mekh. Mater., 47, No. 5, 60–65 (2011).
15. S. R. Ignatovich, A. Menou, M. V. Karuskevich, and P. O. Maruschak, “Fatigue damage and sensor development for aircraft structural health monitoring,” Theor. Appl. Fract. Mec., 65, 23–27 (2013).10.1016/j.tafmec.2013.05.004 ↗
16. M. Petrasek, S. Ignatovich, M. Karuskevich, and T. Maslak, “Surface of metal as an indicator of fatigue damage,” Adv. Military Technol., 8, No. 2, 83–91 (2013).
17. S. R. Ignatovich, M. V. Karuskevich, S. S. Yutskevych, “Evolution of the deformation relief on the surface of a clad aluminum alloy at random cyclic loads,” Int. J. Fatigue, 101, Part 1, 45–50 (2017).10.1016/j.ijfatigue.2017.03.013 ↗