journal article·2002-11

Stress distributions in plasma-sprayed thermal barrier coatings as a function of interface roughness and oxide scale thickness

M Ahrens, R Vaßen, D Stöver

Surface and Coatings Technology· Volume 161· Issue 1
Publisher page

Abstract

Abstract During thermal cyclic loading, plasma-sprayed thermal barrier coatings (TBCs) often show failure within the top coat close to the interface. In all cases this results from crack propagation of pre-existing cracks near the bond coat (BC)–top coat interface. Stresses developing on a microscopic scale near the BC–TBC interface of plasma-sprayed thermal barrier coatings govern crack growth in an initial phase of the failure process. Using a finite element (FE) method the local dependence of stresses in the vicinity of this rough interface was investigated. Measurements of real roughness profiles provided geometrical parameters needed for the calculations. A significant difference in the stress distributions was found for peak and valley locations of the BC roughness profile. The effect of BC oxidation on stress development was more pronounced in the case of less roughness. Analytical fits of the FE results revealed how the parameters of roughness and the oxide thickness correlate with the stress levels. In the next stage of research these fits will serve as input data for a microstructural based lifetime model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Thermal barrier coatings for the 21st century
2. Current status of thermal barrier coatings—an overview10.1016/0257-8972(87)90003-X ↗
3. Thermal barrier coatings
4. Directions of developments of thermal barrier coatings in energy applications10.1016/S0924-0136(99)00244-7 ↗
5. de Masi · 1989
6. Meier · 1991
7. Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings10.1016/S0921-5093(00)01853-0 ↗
8. Kerkhoff · 2000
9. G. Kerkhoff, R. Vaßen, C. Funke, D. Stöver, Finite element analysis of thermal stresses in thermal barrier coatings on cylindrical substrates, in: Proceedings of the 6th Liège Conference, Part III, Materials for Advanced Power Engineering, J. Lecomte-Beckers, F. Schubert, P.J. Ennis, (Eds.), Forschungszentrum Jülich GmbH, Jülich, Germany, 1998, pp. 1669–1678.10.31399/asm.cp.itsc1999p0787 ↗
10. DeMasi-Marcin · J. Eng. Gas Turbines Power · 1990 · 112 · 52110.1115/1.2906198 ↗
11. Nissey · J. Thermal Spray Technol. · 1997 · 6 · 9110.1007/BF02646317 ↗
12. Qian · Acta Mater. · 1997 · 45 · 176710.1016/S1359-6454(96)00257-1 ↗
13. Analytical modelling of oxide thickness effects on residual stresses in thermal barrier coatings10.1016/S1359-6462(99)00430-3 ↗
14. Residual stresses in thermal barrier coatings: effect of interface asperity curvature/height and oxide thickness10.1016/S0921-5093(00)00743-7 ↗
15. The effect of interface roughness and oxide film thickness on the elastic response of thermal barrier coatings to thermal cycling10.1016/S0921-5093(00)00750-4 ↗
16. Modelling oxidation induced stresses in thermal barrier coatings10.1016/S0921-5093(97)00849-6 ↗
17. A software tool to design thermal barrier coatings: a technical note10.1007/BF02646309 ↗
18. Finite element thermal stress solutions for thermal barrier coatings10.1016/0257-8972(87)90116-2 ↗
19. A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. Part I: model formulation10.1016/S1359-6454(01)00060-X ↗
20. Investigations by 3D FE simulations of delamination crack initiation in TBC caused by alumina growth10.1016/S0257-8972(00)01084-7 ↗
21. 1998
22. Effect of heat treatment on elastic properties of separated TBCs10.1557/JMR.1999.0628 ↗
23. Deformation and strength behavior of plasma-sprayed ZrO2–8 wt.% Y2O3 thermal barrier coatings in biaxial flexure and trans-thickness tension10.1002/9780470294635.ch77 ↗
24. M. Ahrens, R. Vaßen, S. Lampenscherf, D. Stöver, Sintering and creep processes in plasma-sprayed thermal Barrier Coatings, J. Thermal Spray, in press.10.1361/10599630420434 ↗
25. Life time prediction model for plasma-sprayed thermal barrier coatings based on a micromechanical approach