Oxidation resistance improvement of Zr-4 alloy in 1000 °C steam environment using ZrO2/FeCrAl bilayer coating
Source abstract
Abstract
Abstract A ZrO2/FeCrAl bilayer coating was prepared on Zr-4 alloy. Plasma electrolytic oxidation (PEO) was used to synthesize the ZrO2 buffer layer and magnetron sputtering was used to deposit the FeCrAl outer layer. The oxidation resistance of the ZrO2/FeCrAl coated Zr-4 alloy was investigated by using 1000 °C steam oxidation tests and was compared with the mono-layer FeCrAl coated and uncoted Zr-4 alloys. Morphologies, phase compositions and elemental distributions of the ZrO2/FeCrAl and FeCrAl coated Zr-4 alloys before and after the steam oxidation tests were characterized by SEM, XRD and EDX mapping and line scans. Results indicated that the introduction of the ZrO2 buffer layer effectively eliminated the high temperature inter-diffusion between FeCrAl and Zr-4 alloy, and consequently improved the adherence and integrity of the FeCrAl layer after the 1000 °C steam oxidation. As a result, the parabolic rate constant of the ZrO2/FeCrAl coated Zr-4 alloy was decreased by about 20 times compared with that of the uncoated and FeCrAl coated Zr-4 alloys in 1000 °C steam environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments10.1016/j.jnucmat.2013.05.047 ↗
2. Irradiation-enhanced α' precipitation in model FeCrAl alloys10.1016/j.scriptamat.2016.02.002 ↗
3. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors10.1016/j.jnucmat.2015.10.019 ↗
4. Hydrogen permeation in FeCrAl alloys for LWR cladding application10.1016/j.jnucmat.2015.02.040 ↗
5. Neutronics and fuel performance evaluation of accident tolerant FeCrAl cladding under normal operation conditions10.1016/j.anucene.2015.06.032 ↗
6. Performance of iron-chromium-aluminum alloy surface coatings on Zircaloy 2 under high-temperature steam and normal BWR operating conditions10.1016/j.jnucmat.2015.11.037 ↗
7. Formation and stability of oxide layer in FeCrAl fuel cladding material under high-temperature steam10.1016/j.jallcom.2016.05.145 ↗
8. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
9. Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors10.1016/j.anucene.2014.09.005 ↗
10. Neutronic evaluation of coating and cladding materials for accident tolerant fuels10.1016/j.pnucene.2015.11.006 ↗
11. Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions10.1016/j.jnucmat.2013.09.052 ↗
12. Protection of zirconium by alumina- and chromia-forming iron alloys under high-temperature steam exposure10.1016/j.jnucmat.2013.03.006 ↗
13. FeCrAl and Zr alloys joined using hot isostatic pressing for fusion energy applications10.1016/j.fusengdes.2016.02.055 ↗
14. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
15. Effect of NaAlO2 concentrations on microstructure and corrosion resistance of Al2O3/ZrO2 coatings formed on zirconium by micro-arc oxidation10.1016/j.apsusc.2010.04.017 ↗
16. Characterization of plasma electrolytic oxidation coatings on Zircaloy-4 formed in different electrolytes with AC current regime10.1016/j.electacta.2011.07.034 ↗
17. Investigation of Plasma Electrolytic Oxidation (PEO) coatings on a Zr–2.5Nb alloy using high temperature/pressure autoclave and tribological tests10.1016/j.surfcoat.2010.08.038 ↗
18. Cathodic voltage-dependent composition, microstructure and corrosion resistance of plasma electrolytic oxidation coatings formed on Zr-4 alloy10.1039/C6RA06197D ↗
19. The study of plasma electrolytic oxidation coatings on Zr and Zr-1% Nb alloy at thermal cycling10.1016/j.surfcoat.2015.02.039 ↗
20. Savushkina · 2017 · 012037
21. Investigation of diffusion-bonding between Zircaloy-4 and 304 stainless steel10.1016/0022-3115(78)90425-7 ↗
22. Reaction diffusion in the zirconium-iron system10.1016/0022-3115(91)90337-7 ↗
23. Comparison of plasma electrolytic oxidation of zirconium alloy in silicate- and aluminate-based electrolytes and wear properties of the resulting coatings10.1016/j.electacta.2012.08.110 ↗
24. Formation of Al2O3–ZrO2 composite coating on zirconium by micro-arc oxidation10.1016/j.scriptamat.2008.03.015 ↗
25. Uniform corrosion of FeCrAl alloys in LWR coolant environments10.1016/j.jnucmat.2016.06.047 ↗
26. Transition joints between Zircaloy-2 and stainless steel by diffusion bonding10.1016/0022-3115(94)90305-0 ↗