Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel
Source abstract
Abstract
Abstract Laser surface melting of AISI 440C martensitic stainless steel was achieved using a 2.5-kW continuous wave Nd:YAG laser. The pitting corrosion behavior of laser surface-melted specimens processed under different processing conditions in 3.5% NaCl solution at 23 °C was studied by potentiodynamic polarization technique. The corrosion resistance of all laser surface-melted specimens was significantly improved, as evidenced by a shift from active corrosion to passivity, a wide passive range and a low passive current density. The pitting potential of the laser surface-melted specimens P08-440C-25 (laser power=0.8 kW, scanning speed=25 mm/s) and P12-440C-25 (laser power=1.2 kW, scanning speed=25 mm/s) was increased to 260 and 200 mV (SCE), respectively, and was much higher than that of the conventionally heat-treated AISI 440C. The pitting corrosion characteristics of the laser surface-melted specimens were strongly dependent on the processing conditions which resulted in different microstructures. The enhanced corrosion resistance was attributed to the dissolution or refinement of carbide particles and the presence of retained austenite. The amount of carbides in the melt layer, which indirectly determine the Cr content in solid solution and hence, the corrosion resistance, was related to the amount of C remaining in solid solution and to decarburization. The pit morphology of the laser surface-melted specimen was also studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J.F. Ready, D.F. Farson, LIA Handbook of Laser Materials Processing, LIA, 2001, pp. 273–279
2. McCafferty · J. Electrochem. Soc. · 1986 · 133 · 109010.1149/1.2108792 ↗
3. Akgun · J. Mater. Sci. · 1995 · 30 · 610510.1007/BF01151534 ↗
4. Kwok · Surf. Coat. Technol. · 1998 · 99 · 29510.1016/S0257-8972(97)00624-5 ↗
5. Conde · Mater. Design · 2000 · 21 · 44110.1016/S0261-3069(00)00037-6 ↗
6. Kwok · Surf. Coat. Technol. · 2000 · 126 · 23810.1016/S0257-8972(00)00533-8 ↗
7. Escudero · Mater. Sci. Eng. A · 1992 · 158 · 22710.1016/0921-5093(92)90012-P ↗
8. Vilar · Opt. Quantum Electron. · 1995 · 27 · 127310.1007/BF00326481 ↗
9. Ahman · Met. Trans. A · 1984 · 15 · 182910.1007/BF02664896 ↗
10. Colaco · Scripta Mater. · 1999 · 41 · 71510.1016/S1359-6462(99)00206-7 ↗
11. Song · Mater. Chem. Phys. · 1991 · 28 · 28110.1016/0254-0584(91)90083-7 ↗
12. Colaco · Surf. Eng. · 1996 · 12 · 31910.1179/sur.1996.12.4.319 ↗
13. Colaco · J. Mater. Sci. Lett. · 1998 · 17 · 56310.1023/A:1006573620796 ↗
14. Strutt · Mater. Sci. Eng. · 1978 · 36 · 21710.1016/0025-5416(78)90074-5 ↗
15. Kimura · Corrosion · 2001 · 57 · 43310.5006/1.3290367 ↗
16. V.S. Kraposhin, Proceedings of the Russian National Conference on Industrial Lasers and Laser Materials Processing, April 1993, Shatura, Moscow Region, Russia, International Society for Optical Engineering, p. 6310.1117/12.171630 ↗
17. ASTM Standard G61-86, Standard Method for Conducting Cyclic Potentiodynamic Polarisation Measurements for Localised Corrosion Susceptibility of Iron-, Nickel- or Cobalt-Based Alloys, in Annual Book of ASTM Standards, Vol. 03.02, ASTM, Philadelphia, 1992
18. Colaco · Scripta Mater. · 1997 · 36 · 19910.1016/S1359-6462(96)00360-0 ↗
19. Obergfell · Z. Metallkd. · 2001 · 92 · 265
20. Furthur insights on the pitting corrosion of stainless steels