journal article·2020-02

On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof

Yuqin Rao, Qun Wang, Daisuke Oka, Chidambaram Seshadri Ramachandran

Publisher page

Abstract

Abstract The plasma electrolytic oxidation (PEO) process was used to deposit an alumina coating on a cold sprayed 7075 aluminum alloy to improve the surface properties. The phase compositions, microstructures, basic mechanical properties, as well as the corrosion and the dry sliding wear resistance of cold sprayed 7075 aluminum alloy before and after PEO treatment, were investigated. The results show that a single-layered dense alumina coating with a thickness of ~15–20 μm and hardness of 1353 HV0.01 is realizable on the cold sprayed 7075 aluminum alloy by PEO treatment aided by an aluminate electrolyte. The corrosion current density and wear rate of the alumina PEO coating were 6.27 × 10−7 A/cm2 and 1.22 × 10−6 mm3/N·m respectively, which were three and two orders of magnitude lower compared to the uncoated rolled 7075 aluminum alloy (T6) substrate, thus highlighting the excellent wear and corrosion resistance of the PEO treated cold sprayed Al alloy surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Magnesium Alloys: Properties and Applications · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Cold gas dynamic spray additive manufacturing today: deposit possibilities, technological solutions and viable applications10.1016/j.matdes.2017.07.067 ↗
2. Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date
3. Potential of cold gas dynamic spray as additive manufacturing technology10.1007/s00170-013-5166-8 ↗
4. Thermo-mechanical post-treatment: a strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites10.1016/j.matdes.2018.06.062 ↗
5. Solid-state additive manufacturing and repairing by cold spraying: a review10.1016/j.jmst.2017.09.015 ↗
6. Microstructure and macroscopic properties of cold sprayed copper coatings10.1063/1.1573740 ↗
7. Cold spraying of titanium: a review of bonding mechanisms, microstructure and properties10.4028/www.scientific.net/KEM.533.53 ↗
8. The unique abilities of cold spray deposition10.1080/09506608.2016.1194948 ↗
9. Cold spray additive manufacturing and repair: fundamentals and applications
10. Micro-nanostructured cermet coatings
11. Cavaliere · 2018
12. Novel Al-based metallic glass coatings by cold gas spray10.1016/j.matdes.2016.01.040 ↗
13. Microstructure and mechanical properties of cold sprayed 6061 Al in As-sprayed and heat treated condition10.1016/j.surfcoat.2016.12.035 ↗
14. Microstructure and mechanical properties of cold sprayed 7075 deposition during non-isothermal annealing10.1016/j.surfcoat.2015.07.016 ↗
15. Microstructure and fatigue behavior of cold spray coated Al505210.1016/j.actamat.2012.08.020 ↗
16. Effects of processing on microstructure evolution and fatigue crack growth mechanisms in cold-spray 6061 aluminum alloy10.1016/j.ijfatigue.2018.01.006 ↗
17. The effects of heat treatment on 7075 Al cold spray deposits10.1016/j.surfcoat.2016.10.064 ↗
18. Effect of higher deposition temperatures on the microstructure and mechanical properties of Al 2024 cold sprayed coatings10.1016/j.surfcoat.2018.01.055 ↗
19. Mechanical and microstructural characterization of cold-sprayed Ti-6Al-4V after heat treatment10.1007/s11666-013-9945-4 ↗
20. Thermo-mechanical post-treatment: a strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites10.1016/j.matdes.2018.06.062 ↗
21. Characterization of Al-7075 metal matrix composites: a review10.1016/j.jmrt.2017.10.012 ↗
22. Heat treatment of 7xxx series aluminium alloys—some recent developments10.1016/S1003-6326(14)63306-9 ↗
23. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
24. The potential of plasma electrolytic oxidized eutectic aluminium-silicon alloy as a cylinder wall surface for lightweight engine blocks10.1243/13506501JET500 ↗
25. Wear performance of in-situ aluminum matrix composite after micro-arc oxidation10.1016/S1003-6326(13)62468-1 ↗
26. Wear of an aluminium alloy coated by plasma electrolytic oxidation10.1016/j.surfcoat.2011.09.068 ↗
27. Effects of electrolyte concentration on the microstructure and properties of plasma electrolytic oxidation coatings on Ti-6Al-4V alloy10.1016/j.surfcoat.2019.07.053 ↗
28. Improving corrosion resistance of friction stir welding joint of 7075 aluminum alloy by micro-arc oxidation10.1016/j.jmst.2014.07.017 ↗
29. Diamond powder incorporated oxide layers formed on 6061 Al alloy by plasma electrolytic oxidation10.1016/j.jallcom.2018.04.089 ↗
30. Fabrication of corrosion resistant hydrophobic ceramic nanocomposite coatings on PEO treated AA707510.1016/j.ceramint.2017.10.014 ↗
31. Fabrication of corrosion resistant hydrophobic ceramic nanocomposite coatings on PEO treated AA707510.1016/j.ceramint.2017.10.014 ↗
32. Increasing thickness and protective properties of PEO-coatings on aluminum alloy10.1016/j.surfcoat.2017.11.025 ↗
33. Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: effect of current density and electrolyte concentration10.1016/j.surfcoat.2010.04.052 ↗
34. Processing of ceramic and cermet composite coatings for strategic and aerospace applications
35. Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process10.1016/j.surfcoat.2013.07.020 ↗
36. Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy10.1016/j.apsusc.2009.08.012 ↗
37. Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray10.1007/s11666-017-0575-0 ↗
38. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments10.1016/S1003-6326(08)60130-2 ↗
39. Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy10.1016/j.jallcom.2011.07.028 ↗
40. Processing of ceramic and cermet composite coatings for strategic and aerospace applications
41. Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
42. High growth rate, wear resistant coatings on an Al–Cu–Li alloy by plasma electrolytic oxidation in concentrated aluminate electrolytes10.1016/j.surfcoat.2014.12.078 ↗
43. The effect of Zn on the microarc oxidation coating behavior of synthetic Al–Zn binary alloys10.1016/j.jallcom.2012.02.094 ↗
44. Effects of alloying elements on microstructure and protective properties of Al2O3 coatings formed on aluminum alloy substrates by plasma electrolysis10.1016/j.surfcoat.2009.07.002 ↗
45. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology10.1016/S0257-8972(02)00918-0 ↗
46. Wear and corrosion resistant coatings on surface of cast A356 aluminum alloy by plasma electrolytic oxidation in moderately concentrated aluminate electrolytes10.1016/S1003-6326(17)60038-4 ↗
47. Effect of micro-arc oxidation on friction–wear behavior of cold-sprayed Al coating in 3.5 wt% NaCl solution10.1007/s11665-019-04076-1 ↗
48. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
49. Influence of combined shot peening and PEO treatment on corrosion fatigue behavior of 7A85 aluminum alloy10.1016/j.apsusc.2019.04.242 ↗
50. Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures10.1016/j.jmrt.2019.02.017 ↗
51. Alumina-zirconia coatings produced by plasma electrolytic oxidation on Al alloy for corrosion resistance improvement10.1016/j.jallcom.2017.07.058 ↗
52. Takadoum · 2013
53. Understanding the dry sliding wear behaviour of atmospheric plasma-sprayed rare earth oxide coatings10.1016/j.matdes.2012.02.040 ↗
54. Comparative evaluation of dry sliding wear behaviour of plasma transferred arc hardfaced surfaces by the pin-on-roller method10.1243/13506501JET569 ↗
55. The transition from mild to severe wear in alumina during sliding10.1016/0956-7151(92)90212-W ↗
56. Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation10.1016/j.surfcoat.2019.04.029 ↗
57. Sliding wear behavior of air plasma sprayed Al2O3 coatings sealed with aluminum phosphate10.1016/j.triboint.2017.08.002 ↗
58. Tribological coatings prepared by cold spray