Cracking mechanisms in high temperature hot-dip galvanized coatings
Source abstract
Abstract
Abstract The cracking behavior of hot-dip galvanized coatings produced by immersion in a pure zinc bath at 560°C is investigated after 3-point bending tests. Microcracks formed in the as-produced δ1 phase as a result of tensile residual stresses developed during processing act as nucleation sites for cracks formed during bending. These cracks follow a Mode I path, normal to the substrate/coating interface, are arrested at the Γ/δ1 interface and continue to propagate parallel to the coating/substrate interface resulting in the delamination and failure of the coatings. Measurements of crack population followed by statistical analysis show that the density of cracks formed during bending in the coating is independent of coating thickness and depends on the applied strain, indicating that crack density is not controlled by crack initiation, but by crack propagation. It is also shown that the density of cracks that reach the surface of the coating depends only on the thickness of the outer Zn-rich layers of the coating that act as barriers to crack propagation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Mechanical Behavior of Composites · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Mackoviak · Int. Metals Rev. · 1979 · 24 · 1
2. Habraken · 1979 · 121
3. S. Harper and R.S. Browne, Ibid. 2 175.
4. D. Etchells, Ibid. 2 181.
5. Horstmann · 1978
6. Hutchinson · Adv. Appl. Mech. · 1992 · 29 · 6310.1016/S0065-2156(08)70164-9 ↗
7. Evans · Oxid. Met. · 1983 · 20 · 19310.1007/BF00656841 ↗
8. Bartlett · Acta Metall. Mater. · 1991 · 39 · 157910.1016/0956-7151(91)90245-V ↗
9. Howard · Acta Metall. Mater. · 1994 · 42 · 282310.1016/0956-7151(94)90223-2 ↗
10. Tsui · Acta Metall. Mater. · 1994 · 42 · 283710.1016/0956-7151(94)90224-0 ↗
11. Evans · J. Mater. Res. · 1988 · 3 · 104310.1557/JMR.1988.1043 ↗
12. Hu · Acta Metall. · 1989 · 3 · 91710.1016/0001-6160(89)90018-7 ↗
13. Evans · Mater. High Temp. · 1994 · 12 · 21910.1080/09603409.1994.11689489 ↗
14. Evans · Int. J. Solids Structures · 1984 · 20 · 45510.1016/0020-7683(84)90012-X ↗
15. Evans · Mater. Sci. Eng. · 1990 · A126 · 5310.1016/0921-5093(90)90113-H ↗
16. Evans · Acta Metall. Mater. · 1992 · 40 · S29510.1016/0956-7151(92)90289-Q ↗
17. Howe · Int. Mater. Rev. · 1993 · 38 · 25710.1179/imr.1993.38.5.257 ↗
18. Tullock · Acta Metall. Mater. · 1994 · 42 · 324510.1016/0956-7151(94)90422-7 ↗
19. Agrawal · Acta Metall. · 1989 · 37 · 126510.1016/0001-6160(89)90120-X ↗
20. Thouless · J. Am. Ceram. Soc. · 1990 · 73 · 214410.1111/j.1151-2916.1990.tb05290.x ↗
21. Delannay · Acta Metall. Mater. · 1991 · 39 · 106110.1016/0956-7151(91)90193-5 ↗
22. Clyne · J. Thermal Spray Tech. · 1996 · 5 · 40110.1007/BF02645271 ↗
23. ASTM Standard E290-92, vol. 03.01, ASTM, Philadelphia, PA, USA, 1995, p. 340.
24. W.G. Granzow, Metals Handbook, vol. 1, 10th ed., ASM International, Metals Park, OH, USA, 1990, p. 573.
25. Montogomery · 1997
26. Katiforis · Surf. Coat. Tech. · 1996 · 78 · 18510.1016/0257-8972(94)02408-1 ↗
27. Hershman · 1964
28. Jena · Z. Metallkde · 1982 · 73 · 517
29. Eshelby · Proc. R. Soc. London Ser. A · 1957 · 241 · 37610.1098/rspa.1957.0133 ↗
30. Foct · 1993
31. Thouless · Acta Metall. · 1987 · 35 · 133310.1016/0001-6160(87)90015-0 ↗
32. Drory · Acta Metall. · 1988 · 36 · 201910.1016/0001-6160(88)90303-3 ↗
33. Sugimura · Acta Metall. Mater. · 1995 · 43 · 115710.1016/0956-7151(94)00295-S ↗
34. Adachi · Acta Metall. Mater. · 1995 · 43 · 318910.1016/0956-7151(95)00012-K ↗