Formation and oxidation performance of low-temperature pack aluminide coatings on ferritic–martensitic steels
Source abstract
Abstract
Abstract A pack cementation process was developed to coat commercial 9% Cr ferritic–martensitic steel T91 at temperatures below its normal tempering temperature to avoid any potential detrimental effect on the mechanical properties of the coated alloy. In order to prevent the formation of Fe 2 Al 5 coatings, the Al activity in the pack cementation process was reduced by substituting the pure Al masteralloy with binary Cr–Al masteralloys containing either 15 or 25 wt.% Al. When the Cr–25Al masteralloy was used, a duplex coating was formed at 700 °C, consisting of a thin Fe 2 Al 5 outer layer and an inner layer of FeAl. With the Cr–15Al masteralloy, an FeAl coating of ~ 12 μm thick was achieved at 700 °C. The pack aluminide coatings fabricated at 700 °C are being evaluated in air + 10 vol.% H 2 O at 650 °C and 700 °C to determine their long-term oxidation performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Tortorelli · Mater. Sci. Eng., A Struct. Mater.: Prop. Microstruct. Process. · 1992 · 153 · 57310.1016/0921-5093(92)90253-W ↗
2. Banovic · Metall. Mater. Trans. · 2000 · 31A · 180510.1007/s11661-006-0247-z ↗
3. Pint · Mater. High Temp. · 2001 · 18 · 18510.3184/096034001783640559 ↗
4. Agüero · Surf. Coat. Technol. · 2005 · 200 · 121910.1016/j.surfcoat.2005.07.080 ↗
5. Opila · Mat. Sci. Forum · 2004 · 461–4 · 76510.4028/www.scientific.net/MSF.461-464.765 ↗
6. Nickel · Fresenius' J. Anal. Chem. · 1998 · 361 · 54010.1007/s002160050942 ↗
7. Asteman · Oxid. Met. · 2000 · 54 · 1110.1023/A:1004642310974 ↗
8. Pint · Mat. Sci. Forum · 2004 · 461–4 · 79910.4028/www.scientific.net/MSF.461-464.799 ↗
9. Zhang · Oxid. Met. · 2004 · 62 · 10310.1023/B:OXID.0000038788.02094.cb ↗
10. Zhang · Surf. Coat. Technol. · 2004 · 188–189 · 3510.1016/j.surfcoat.2004.07.090 ↗
11. Zhang · Mater. Corros. · 2007 · 58 · 75110.1002/maco.200704057 ↗
12. Dryepondt · Surf. Coat. Technol. · 2006 · 201 · 388010.1016/j.surfcoat.2006.07.258 ↗
13. Bangaru · J. Vac. Sci. Technol., B · 1984 · 2 · 80610.1116/1.582882 ↗
14. Geib · Oxid. Met. · 1993 · 40 · 21310.1007/BF00664491 ↗
15. John · Thin Solid Films · 2004 · 466 · 33910.1016/j.tsf.2004.02.042 ↗
16. Rohr · Mat. Sci. Forum · 2004 · 461–464 · 40110.4028/www.scientific.net/MSF.461-464.401 ↗
17. Rohr · Mater. Corros. · 2005 · 56 · 87410.1002/maco.200503918 ↗
18. Xiang · J. Mater. Sci. · 2005 · 40 · 195910.1007/s10853-005-1217-3 ↗
19. Levin · Surf. Coat. Technol. · 1998 · 106 · 20910.1016/S0257-8972(98)00529-5 ↗
20. Pérez · Intermetallics · 2006 · 14 · 81110.1016/j.intermet.2005.12.010 ↗
21. Y.Q. Wang, Y. Zhang, D.A. Wilson, “Formation of Aluminide Coatings on Ferritic–Martensitic Steels by a Low-Temperature Pack Cementation Process”, submitted to Surf. Coat. Technol., 2009.
22. Y.Q. Wang, “Aluminide Coatings on Fe–9Cr–1Mo Steel Synthesized by Pack Cementation for Power Generation Applications”, Ph.D. Dissertation, Tennessee Tech University, December, 2006, pp. 152–177.
23. Pint · Surf. Coat. Technol. · 2007 · 202 · 63710.1016/j.surfcoat.2007.06.046 ↗
24. Zhang · Surf. Coat. Technol. · 2008 · 202 · 383910.1016/j.surfcoat.2008.01.023 ↗
25. Zhang · Surf. Coat. Technol. · 2005 · 200 · 123110.1016/j.surfcoat.2005.07.081 ↗
26. Agüero · Surf. Coat. Technol. · 2007 · 201 · 625310.1016/j.surfcoat.2006.11.033 ↗