Effects of scratch tests on the adhesive and cohesive properties of borided Inconel 718 superalloy
Source abstract
Abstract
Abstract New results about the scratch adhesion resistance of nickel boride layer on Inconel 718 superalloy were estimated in the present study. The nickel boride layer was developed on the surface of Inconel 718 superalloy by means of the powder-pack boriding process conducted at 1173 K with 2, 4, and 6 h of exposure. The microstructure of the nickel boride layer was analyzed from optical microscopy, X-ray diffraction and energy dispersive spectroscopy (EDS). Furthermore, and before the scratch tests, indentation properties of the nickel boride layers such as hardness, Young's modulus, and the distribution of residual stresses were evaluated using Berkovich nanoidentation tests applying a constant load (50 mN) across the diffusion layers. The scratch tests were performed over the surface of the nickel boride layer-substrate systems using a Rockwell-C diamond indenter with a continuously increasing normal force from 1 to 80 N, whereas the behavior of the coefficient of friction and the residual depth as a function of the scratch length were monitored during the tests. For the determination of the critical loads, the combination of acoustic emission signal with microscopic observations of the worn tracks were used; the critical loads were estimated at which the layer cracks (cohesive failure) or is detached (adhesive failure) and they explained according to the mechanical properties of the nickel boride layer-substrate system. For all the set of experimental conditions, the presence of three types of failure mechanisms over the worn tracks were detected, while the results showed that the critical loads increase with enhancing nickel boride layer thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Effect of standard heat treatment on microstructure and properties of borided Inconel 71810.1016/S1003-6326(15)63621-4 ↗
2. Boriding of nickel by the powder-pack method
3. Evaluation of electrochemical boriding of Inconel 60010.1016/j.surfcoat.2012.08.083 ↗
4. Nanomechanical properties of gas-borided layer produced on Nimonic 80-A alloy10.1016/j.ceramint.2017.03.156 ↗
5. Microstructure and properties of laser-borided Inconel 600-alloy10.1016/j.apsusc.2013.07.167 ↗
6. Growth kinetics of boride layers formed on 99.0% purity nickel10.1007/s12034-015-0931-y ↗
7. Microstructure, property investigation of paste boronized pure nickel, and Nimonic 90 superalloy10.1016/j.matchemphys.2008.11.055 ↗
8. Thermochemical boriding of Inconel 718
9. Evaluation of halide-activated pack boriding of Inconel 72210.1007/s11661-999-0059-z ↗
10. Fracture toughness of hard ceramic phases produced on Nimonic 80A-alloy by gas boriding10.1016/j.ceramint.2015.10.119 ↗
11. The effect of friction on scratch adhesion testing: application to a sol-gel coating on polypropylene10.1016/S0040-6090(99)00729-4 ↗
12. The effect of boronizing on metallic alloys for automotive applications10.1007/s11665-008-9228-2 ↗
13. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
14. Development of semi-empirical formulation for extracting materials properties from nanoindentation measurments: residual stresses, substrate effect and creep10.1016/j.tsf.2007.09.005 ↗
15. Engineering the surface with boron based materials10.1179/sur.1985.1.3.203 ↗
16. Thermodynamic assessment of Ni-B phase diagram10.1179/mst.1993.9.3.205 ↗
17. Boriding of nickel and other metals at temperatures below 670°C10.1149/1.2119643 ↗
18. Mechanical properties of FeB and Fe2B layers estimated by Berkovich nanoindentation on tool borided steels10.1016/j.surfcoat.2012.05.145 ↗
19. The effect of carbon, chromium and nickel on the hardness of boride layers10.1016/0257-8972(87)90140-X ↗
20. A study of nanoindentation for mechanical characterization of chromium and nickel borides' mixtures formed by laser boriding10.1016/j.ceramint.2013.11.059 ↗
21. Characterization of CoB-Co2B coatings by the scratch test10.1080/02670844.2015.1121315 ↗
22. Origin of compressive residual stress in polycrystalline thin films10.1103/PhysRevLett.88.156103 ↗
23. Improving the adhesion resistance of the boride coatings to AISI 316L steel substrate by diffusion annealing10.1007/s11665-016-2201-6 ↗
24. Analytical correlation of hardness and scratch adhesion for hard films10.1016/S0257-8972(01)01329-9 ↗
25. Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load10.1016/0040-6090(87)90377-4 ↗
26. Failures modes in scratch adhesion testing10.1016/0257-8972(91)90188-3 ↗
27. Scratch adhesion testing of hard coatings10.1016/0040-6090(83)90019-6 ↗
28. Damage mechanisms in AISI 304 borided steel: scratch and Daimler-Benz adhesion tests10.1590/1516-1439.025515 ↗