journal article·2020-05

Influence of N content on structure and mechanical properties of multi-component Al-Cr-Nb-Y-Zr based thin films by reactive magnetron sputtering

Kristina von Fieandt, Lars Riekehr, Barbara Osinger, Stefan Fritze, Erik Lewin

Publisher page

Abstract

Abstract Al-Cr-Nb-Y-Zr-N films have been deposited with reactive dc magnetron sputtering at various N2 flow ratios to achieve films with different nitrogen content, from purely metallic to fully nitrided films. The structure evolved from mainly amorphous with a minor crystalline intermetallic phase for the film without nitrogen, to nanocomposites with a cubic crystalline phase in an amorphous matrix for intermediate nitrogen content (15–41 at.% N), and at higher nitrogen content (46–51 at.% N) to crystalline solid solution nitrides with a NaCl-type structure. Partial elemental segregation on the nanoscale was found in all studied samples and the films exhibited different segregation behaviour depending on the nitrogen content, implying that the structural evolution on the nanoscale of films in this material system complex and highly composition-dependent. The hardness increased with increasing nitrogen content, reaching a maximum at about 30 GPa at for the nitride films with 50 at.% N. Deformation behaviour, studied by indentation measurements, of the nitride films was found to be ductile, where no sign of crack formation could be observed. This can be attributed to a metallic phase in the columnar boundaries caused by partial elemental segregation of mainly yttrium. Hence, films within in this material system, although the nanostructure is found to be relatively complex, show very promising mechanical properties and the structural complexity can be used as a guide for designing nitride materials that combine high hardness with ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
4. Nanocrystalline high-entropy alloys: a new paradigm in high-temperature strength and stability10.1021/acs.nanolett.6b04716 ↗
5. Superior hydrogen storage in high entropy alloys10.1038/srep36770 ↗
6. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
7. High-entropy ceramic thin films; a case study on transition metal diborides10.1016/j.scriptamat.2018.02.008 ↗
8. Carbon-containing multi-component thin films10.1016/j.tsf.2019.137411 ↗
9. The structure and properties of high-entropy alloys and nitride coatings based on them10.1070/RCR4407 ↗
10. Entropy-stabilized oxides10.1038/ncomms9485 ↗
11. Preparation and characterization of AlCrTaTiZr multi-element nitride coatings10.1016/j.surfcoat.2006.06.048 ↗
12. Effect of nitrogen content and substrate bias on mechanical and corrosion properties of high-entropy films (AlCrSiTiZr)100−xNx10.1016/j.surfcoat.2012.03.096 ↗
13. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
14. Effect of nitrogen flow ratios on the structure and mechanical properties of (TiVCrZrY)N coatings prepared by reactive magnetron sputtering10.1016/j.apsusc.2010.08.078 ↗
15. Reactive sputter deposition of CoCrCuFeNi in nitrogen/argon mixtures10.1016/j.jallcom.2018.08.044 ↗
16. Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr)Nx multi-component coatings10.1016/j.surfcoat.2010.03.041 ↗
17. Criteria for predicting the formation of single-phase high-entropy alloys
18. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
19. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
20. Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering10.1016/j.tsf.2010.11.034 ↗
21. Structure and mechanical properties of multi-element (AlCrMnMoNiZr)Nx coatings by reactive magnetron sputtering10.1016/j.jallcom.2013.01.148 ↗
22. The influence of nitrogen pressure on the fabrication of the two-phase superhard nanocomposite (TiZrNbAlYCr)N coatings10.1016/j.matlet.2017.09.121 ↗
23. Phase stability and alloy-related trends in Ti–Al–N, Zr–Al–N and Hf–Al–N systems from first principles10.1016/j.surfcoat.2011.09.019 ↗
24. Multi-component (Al,Cr,Nb,Y,Zr)N thin films by reactive magnetron sputter deposition for increased hardness and corrosion resistance10.1016/j.tsf.2019.137685 ↗
25. Summary of ISO/TC 201 standard: VII ISO 15472: 2001—surface chemical analysis—X-ray photoelectron spectrometers—calibration of energy scales10.1002/sia.1076 ↗
26. Unit cell refinement from powder diffraction data: the use of regression diagnostics10.1180/minmag.1997.061.404.07 ↗
27. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
28. The tension of metallic films deposited by electrolysis10.1098/rspa.1909.0021 ↗
29. Celebrating the 100th anniversary of the Stoney equation for film stress: developments from polycrystalline steel strips to single crystal silicon wafers10.1016/j.tsf.2008.07.014 ↗
30. The JCPDS Database, Data Sets: 25-1495 (AlN), 11-0065 (CrN), 38-1155 (NbN), 35-0779 (YN), 35-0753 (ZrN).
31. Murray · 1987
32. Line broadening analysis using integral breadth methods: a critical review10.1107/S0021889804004583 ↗
33. Biaxially aligned titanium nitride thin films deposited by reactive unbalanced magnetron sputtering10.1016/j.surfcoat.2004.09.012 ↗
34. Microstructural evolution during film growth10.1116/1.1601610 ↗
35. Pathways of atomistic processes on TiN(001) and (111) surfaces during film growth: an ab initio study10.1063/1.1567797 ↗
36. Moulder · 1995
37. Core-level spectra and binding energies of transition metal nitrides by non-destructive X-ray photoelectron spectroscopy through capping layers10.1016/j.apsusc.2016.10.152 ↗
38. X-ray photoelectron spectroscopy analyses of the electronic structure of polycrystalline Ti1-xAlxN thin films with 0 ≤ x ≤ 0.9610.1116/11.20140506 ↗
39. XPS, AES, and EELS characterization of nitrogen-containing thin films10.1016/j.elspec.2003.12.004 ↗
40. Comparison of surface oxidation of titanium nitride and chromium nitride films studied by X-ray absorption and photoelectron spectroscopy10.1116/1.580764 ↗
41. Comparison of TiN, ZrN and CrN hard nitride coatings: electrochemical and thermal oxidation10.1016/S0040-6090(97)00069-2 ↗
42. Electronic properties of Cr1−xAlxN thin films deposited by reactive magnetron sputtering10.1016/S0040-6090(02)00830-1 ↗
43. Electronic structure of Nb2N and NbN thin films10.1063/1.2173039 ↗
44. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
45. The Al-Y (aluminum-yttrium) system10.1007/BF02882174 ↗
46. The Cr-Y (chromium-yttrium) system10.1007/BF02869503 ↗
47. The Nb-Y (niobium-yttrium) system10.1007/BF02645717 ↗
48. The Y-Zr (yttrium-zirconium) system10.1007/BF02645977 ↗
49. The Cr−Nb (chromium-niobium) system10.1007/BF02867811 ↗
50. The Cr-Zr (chromium-zirconium) system10.1007/BF02868997 ↗
51. The Nb−Zr (niobium−zirconium) system10.1007/BF02873409 ↗
52. Laves phase fields in Cr-Zr-Nb and Cr-Zr-Hf alloy systems10.1016/S1359-6462(02)00473-6 ↗
53. Microstructure and chemical state of Ti1−xYxN film deposited by reactive magnetron sputtering10.1116/1.1319680 ↗
54. An investigation on the crack resistance of CrN, CrBN and CrTiBN coatings via nanoindentation10.1016/j.vacuum.2017.08.041 ↗
55. Chemical and microstructural characterization of (Y or Zr)-doped CrAlN coatings10.1016/j.surfcoat.2011.07.071 ↗
56. Structural and mechanical properties of multi-element (TiVCrZrHf)N coatings by reactive magnetron sputtering10.1016/j.apsusc.2011.09.006 ↗
57. Effect of N2 flow on the structure and mechanical properties of (CrTaTiVZr)Nx coatings processed by reactive magnetron sputtering10.1557/jmr.2015.79 ↗
58. Toughness of hard nanostructured ceramic thin films10.1016/j.surfcoat.2006.07.020 ↗
59. Stress, interfacial effects and mechanical properties of nanoscale multilayered coatings10.1016/j.surfcoat.2007.05.068 ↗
60. Material selection for hard coatings10.1116/1.573700 ↗
61. Microstructure and thermoelectric properties of CrN and CrN/Cr2N thin films10.1088/1361-6463/aad2ef ↗
62. Phase stability, mechanical properties and thermal stability of Y alloyed Ti–Al–N coatings10.1016/j.surfcoat.2013.07.030 ↗
63. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗