journal article·2018-05

Fabrication of durable porous and non-porous superhydrophobic LLDPE/SiO 2 nanoparticles coatings with excellent self-cleaning property

M. Satapathy, P. Varshney, D. Nanda, S.S. Mohapatra, A. Behera, A. Kumar

Publisher page

Abstract

Abstract In this current work, SiO2 nanoparticles embedded linear low density polyethylene (LLDPE) superhydrophobic coatings on glass substrates were fabricated using dip-coating technique. Porosity of SiO2 nanoparticles coupled LLDPE superhydrophobic coatings was also varied using non-solvent (ethanol) by employing phase separation method. Surface morphology, water contact angle, self-cleaning and water-repellency of coatings were characterized. Furthermore, the stability of these coatings was also evaluated by conducting thermal, chemical and mechanical stability tests at perturbation conditions. Along with, comparative studies of porous and non-porous LLDPE/SiO2 coatings on their performances were presented in the current work. By creating porosity and/or embedding SiO2 nanoparticles in to LLDPE matrix, superhydrophobicity is achieved with water contact angle of 170° and sliding angle of 3.8°. Coatings exhibit the excellent self-cleaning property. Their superhydrophobic property is also maintained after annealing in temperature range from 40 to 120 °C. Water jet impact test reveals the excellent water repellent nature of coatings. Non-porous coatings exhibit more stability in pH range from 2 to 9 than porous coatings. By abrasion test with micro-fiber cloth and tape peeling tests, it is observed that porous coatings are more durable than non-porous coatings. The aforesaid coatings have great industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Characterization and distribution of water-repellent, self-cleaning plant surfaces10.1006/anbo.1997.0400 ↗
2. Bhushan · 2016 · 1
3. Gecko-inspired synthesis of superhydrophobic ZnO surfaces with high water adhesion10.1016/j.colsurfa.2011.03.024 ↗
4. Mimicking water striders' legs superhydrophobicity and buoyancy with cabbage leaves and nanotube carpets10.1557/jmr.2012.382 ↗
5. Smart, clean surfaces10.1016/S1369-7021(03)01131-3 ↗
6. Bioinspired self-cleaning surfaces with superhydrophobicity, superoleophobicity, and superhydrophilicity10.1039/C2RA21260A ↗
7. Superhydrophobic surface structures in thermoplastic polymers by interference lithography and thermal imprinting10.1016/j.apsusc.2009.07.001 ↗
8. Anti-adhesive effects of diverse self-assembled monolayers in nanoimprint lithography10.1016/j.sna.2006.10.017 ↗
9. Facile transition from hydrophilicity to superhydrophilicity and superhydrophobicity on aluminum alloy surface by simple acid etching and polymer coating10.1016/j.apsusc.2013.04.124 ↗
10. Fabrication of superhydrophobic and oleophobic surface on zinc substrate by a simple method10.1016/j.colsurfa.2015.01.037 ↗
11. Design of superhydrophobic paper/cellulose surfaces via plasma enhanced etching and deposition
12. Superhydrophobic perfluoropolymer surfaces having heterogeneous roughness created by dip-coating from solutions containing a nonsolvent10.1016/j.apsusc.2013.12.013 ↗
13. Self-cleaning superhydrophobic surface based on titanium dioxide nanowires combined with poly-dimethylsiloxane10.1016/j.apsusc.2013.07.100 ↗
14. A facile dip-coating process for preparing highly durable superhydrophobic surface with multi-scale structures on paint films10.1016/j.jcis.2009.05.061 ↗
15. Superhydrophobic silica coating by dip coating method10.1016/j.apsusc.2013.04.001 ↗
16. Preparation of silane-functionalized silica films via two-step dip coating sol–gel and evaluation of their superhydrophobic properties10.1016/j.apsusc.2014.08.095 ↗
17. Water repellent porous silica films by sol–gel dip coating method10.1016/j.jcis.2010.08.003 ↗
18. Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through spin-coating with hydrophobic fumed silica10.1016/j.polymer.2015.02.032 ↗
19. Fabrication of a superhydrophobic surface via spraying with polystyrene and multi-walled carbon nanotubes10.1016/j.colsurfa.2014.10.029 ↗
20. A facile spraying method for fabricating superhydrophobic leather coating10.1016/j.colsurfa.2015.02.019 ↗
21. Superhydrophobic SiO2 micro-particle coatings by spray method10.1016/j.surfcoat.2012.07.055 ↗
22. Fabrication of superhydrophobic and oleophobic sol–gel nanocomposite coating10.1016/j.surfcoat.2012.03.044 ↗
23. Antibacterial properties and chemical stability of superhydrophobic silver-containing surface produced by sol–gel route10.1016/j.colsurfa.2014.04.037 ↗
24. Fabrication of superhydrophobic wood surface by a sol-gel process10.1016/j.apsusc.2011.08.100 ↗
25. Facile fabrication of superhydrophobic surfaces with low roughness on Ti–6Al–4V substrates via anodisation10.1016/j.apsusc.2014.07.059 ↗
26. Facile fabrication of superhydrophilic/superhydrophobic surface on titanium substrate by single-step anodization and fluorination10.1016/j.apsusc.2015.02.117 ↗
27. One-step chemical vapor deposition and modification of silica nanoparticles at the lowest possible temperature and superhydrophobic surface fabrication10.1016/j.cej.2014.04.100 ↗
28. Electrochemical fabrication of superhydrophobic Zn surfaces10.1016/j.apsusc.2014.07.140 ↗
29. Self-assembly of amino-functionalized monolayers on silicon surfaces and preparation of superhydrophobic surfaces based on alkanoic acid dual layers and surface roughening10.1016/j.jcis.2005.11.048 ↗
30. Effects of nanorod structure and conformation of fatty acid self-assembled layers on superhydrophobicity of zinc oxide surface10.1016/j.jcis.2007.07.046 ↗
31. Nano-casting technique to prepare polyaniline surface with biomimetic superhydrophobic structures for anticorrosion application10.1016/j.electacta.2013.02.016 ↗
32. Fabrication of hierarchical structures with ZnO nanowires on micropillars by UV soft imprinting and hydrothermal growth for a controlled morphology and wettability10.1016/j.apsusc.2014.08.146 ↗
33. Preparation of functionalized graphene/linear low density polyethylene composites by a solution mixing method10.1016/j.carbon.2010.10.031 ↗
34. Vasile · 2005
35. Fabrication of stable homogeneous superhydrophobic HDPE/graphene oxide surfaces on zinc substrates10.1039/C6RA03730E ↗
36. Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces10.1021/la101827c ↗
37. Fabricating polymer superhydrophilic/superhydrophobic surfaces by replica-molding method using CaCO3 particles as template
38. Synthesis of transparent superhydrophobic polyethylene surfaces10.1016/j.surfcoat.2005.06.022 ↗
39. Low-density polyethylene superhydrophobic surface by control of its crystallization behaviour10.1002/marc.200400256 ↗
40. Preparation and characterization of self-cleaning stable superhydrophobic linear low-density polyethylene10.1088/1468-6996/9/4/045007 ↗
41. Fabrication of superhydrophobic surface by a laminating exfoliation method10.1039/C3TA14204C ↗
42. Fernando · 2009
43. Wettability of porous surfaces10.1039/tf9444000546 ↗
44. Transformation of a simple plastic into a superhydrophobic surface10.1126/science.1078365 ↗
45. Thermally stable and transparent superhydrophobic sol–gel coatings by spray method10.1007/s10971-012-2798-3 ↗