journal article·2021-01

Tribological performance and high temperature oxidation behaviour of thermal sprayed Ni- and NiCrAlY-based composite coatings

Peiying Shi, Wenzhen Wang, Shanhong Wan, Qiang Gao, Huwei Sun, Xiaochun Feng, Gewen Yi, Erqing Xie, Qihua Wang

Publisher page

Abstract

Abstract Mechanical, tribological performance, and high temperature oxidation behaviour of Ni- and NiCrAlY-based composite coatings with the addition of TiO2/ZnO were investigated. NiCrAlY-based composite coating presents a higher microhardness value than that of the Ni-based composite coatings. The tribological performance of composite coatings is improved by incorporating TiO2/ZnO. In particular, the NiCrAlY- based composite coatings present the lowest friction coefficient (0.24) and wear rate (7.3 × 10−6 mm3 N−1 m−1) at 800 °C. The results of high-temperature oxidation experiments show that the ZnO within the coating diffuses gradually to the surface with the extension of holding time at 800 and 1000 °C. The diffusion behaviour at 800 °C can be inhibited by the substitution of the metal matrix from Ni to NiCrAlY, while it was accelerated as temperature rising up to 1000 °C and have no difference in Ni- and NiCrAlY-based composite coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers — a review10.1016/j.surfcoat.2014.10.046 ↗
2. Corrosion resistance of APS- and HVOF-sprayed coatings in the Al2O3-TiO2 system10.1007/s11666-009-9422-2 ↗
3. Corrosion behavior of cold sprayed titanium protective coating on 1Cr13 substrate in seawater10.1016/j.surfcoat.2006.07.104 ↗
4. Tribological behavior of the low-pressure cold sprayed (Cu-5Sn)/Al2O3-Ag solid-lubricating coating in artificial seawater10.1016/j.surfcoat.2020.126359 ↗
5. Sol–gel coatings with hydrothermal hydroxylation as pre-treatment for 2198-T851 corrosion protection performance10.1016/j.apsusc.2020.145285 ↗
6. Use of a sol–gel conversion coating for aluminum corrosion protection10.1016/S0257-8972(01)01002-7 ↗
7. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding10.1016/j.surfcoat.2017.11.051 ↗
8. Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding10.1016/j.surfcoat.2019.01.044 ↗
9. Analysis of the microstructural evolution and interface diffusion behavior of NiCoCrAlYTa coating in high temperature oxidation10.1016/j.corsci.2019.03.022 ↗
10. Enhanced interfacial bonding and superior oxidation resistance of CoCrAlY-TiB2 composite coating fabricated by air plasma spraying10.1016/j.corsci.2019.108102 ↗
11. Effects of the β phase size and shape on the oxidation behavior of NiCoCrAlY coating10.1016/j.corsci.2018.10.008 ↗
12. Microstructure, mechanical and tribological property of multi-components synergistic self-lubricating NiCoCrAl matrix composite10.1016/j.triboint.2018.10.050 ↗
13. Influence of the microstructure of plasma deposited MCrAlY coatings on their tribological behaviour10.1016/S0257-8972(97)00579-3 ↗
14. Tribological behaviour of self-lubricating materials at high temperatures10.1080/09506608.2017.1410944 ↗
15. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
16. A crystal-chemical approach to lubrication by solid oxides10.1023/A:1019183101329 ↗
17. Effects of ZnO and MoS2 solid lubricants on mechanical and tribological properties of M50-steel-based composites at high temperatures: experimental and simulation study10.1007/s11249-017-0880-2 ↗
18. Investigation of the effects of mixtures of WS2 and ZnO solid lubricants on the sliding friction and wear of M50 steel against silicon nitride at elevated temperatures10.1016/j.wear.2017.01.098 ↗
19. Fabrication and high-temperature tribological properties of self-lubricating NiCr–BaMoO4 composites10.1016/j.wear.2015.01.063 ↗
20. Mechanical and tribological properties of plasma sprayed NiAl composite coatings with addition of nanostructured TiO2/Bi2O310.1016/j.surfcoat.2018.05.055 ↗
21. High temperature tribological behaviors and wear mechanisms of NiAl-MoO3/CuO composite coatings10.1016/j.surfcoat.2020.125910 ↗
22. Microstructure, mechanical and tribological properties of NiAl matrix composites with addition of BaO/TiO2 binary oxides10.1016/j.triboint.2019.106108 ↗
23. Microstructure and high temperature oxidation resistance of nickel based alloy GH4169 irradiated by high current pulsed electron beam10.1016/j.surfcoat.2016.11.041 ↗
24. Oxidation behavior of laser remelted plasma sprayed NiCrAlY and NiCrAlY–Al2O3 coatings10.1016/S0257-8972(00)01102-6 ↗
25. Influence of Al2O3 mass fractions on microstructure, oxidation resistance and friction–wear behaviors of CoCrAlYTaSi coatings10.1016/j.surfcoat.2019.125058 ↗
26. Oxidation and interfacial fracture behaviour of NiCrAlY/Al2O3 coatings on an orthorhombic-Ti2AlNb alloy10.1016/j.corsci.2010.12.007 ↗
27. Alumina grown during deposition of thermal barrier coatings on NiCrAlY10.1111/j.1151-2916.2003.tb03357.x ↗
28. Oxidation characteristics of a platinized MCrAlY bond coat for TBC systems during cyclic oxidation at 1000 °C10.1016/j.surfcoat.2004.11.038 ↗
29. Characterization of alumina interfaces in TBC systems10.1007/s10853-008-3221-x ↗
30. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
31. Zhong-lei · 2006
32. Oxidation of double-glow plasma chromising coating on TC4 titanium alloys10.1016/j.corsci.2012.08.063 ↗
33. The effect of pre-oxidation on the oxidation behaviour of Ti-alloy at 300 °C in an alkaline steam10.1016/S0257-8972(01)01031-3 ↗
34. Improvement in the oxidation resistance of TiAl by preoxidation in a SiO2 -powder pack10.1007/BF01196645 ↗
35. High temperature oxidation behavior of TiO2+ZrO2 composite ceramic coatings prepared by microarc oxidation on Ti6Al4V alloy10.1016/j.surfcoat.2014.11.031 ↗
36. Long-term high temperature oxidation and hot corrosion behavior of an enamel coating on γ-TiAl Intermetallics at 700°C
37. Oxidation protection of gamma-titanium aluminide using glass-ceramic coatings10.1016/j.surfcoat.2008.12.029 ↗
38. Effect of enamel coating on oxidation and hot corrosion behaviors of Ti-24Al-14Nb-3V alloy10.1361/105994906X136151 ↗
39. TiO2–ZnO/Ni–5 wt%Al composite coatings on GH4169 superalloys by atmospheric plasma spray techniques and theirs elevated-temperature tribological behavior10.1016/j.ceramint.2020.02.138 ↗
40. Investigation into the effects of Fe additions on the equilibrium phase compositions, phase fractions and phase stabilities in the Ni–Cr–Al system10.1016/j.actamat.2009.10.059 ↗
41. High-temperature oxidation behavior of laser-aided additively manufactured NiCrAlY coating10.1016/j.corsci.2017.02.001 ↗
42. Phase composition and residual stresses in thermal barrier coatings10.1134/S0036029515100067 ↗
43. Preparation of MCrAlY–Al2O3 composite coatings with enhanced oxidation resistance through a novel powder manufacturing process10.1007/s11666-019-00830-y ↗
44. Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying10.1016/j.triboint.2017.01.031 ↗
45. On the bonding strength in thermally sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2012.12.018 ↗
46. High temperature microstructure and microhardness evolution in dense NiCrAlY bulk material fabricated by spark plasma sintering10.1016/j.msea.2010.12.094 ↗
47. Sliding wear and fatigue cracking damage mechanisms in reciprocal and unidirectional sliding of high-strength steels in dry contact10.1016/j.wear.2019.203119 ↗
48. Tribology of NiCrAlY+Al2O3 composite coatings by plasma spraying with hybrid feeding of dry powder+suspension10.1016/j.wear.2015.10.014 ↗
49. Investigation of high temperature oxidation behavior and tribological performance on cold sprayed nickel–alumina composite coating10.1016/j.surfcoat.2013.11.024 ↗
50. Room and elevated temperature sliding wear behavior of cold sprayed Ni-WC composite coatings10.1016/j.surfcoat.2018.05.090 ↗
51. Unusual competitive and synergistic effects of graphite nanoplates in engine oil on the tribofilm formation10.1002/admi.201901081 ↗
52. “Hybrid” plasma spraying of NiCrAlY+Al2O3+h-BN composite coatings for sliding wear applications10.1016/j.wear.2017.02.027 ↗
53. Isothermal oxidation of air plasma spray NiCrAlY bond coatings10.1016/S0257-8972(01)01557-2 ↗
54. Oxidation behaviour of NiCrAlY coatings on Ni-based superalloy10.1016/S0257-8972(01)01427-X ↗
55. Influence of Ag content on mechanical and tribological behavior of DLC coatings10.1016/j.surfcoat.2013.05.048 ↗
56. Microstructure and tribology of TiC(Ag)/a-C:H nanocomposite coatings deposited by unbalanced magnetron sputtering10.1016/j.surfcoat.2012.01.036 ↗
57. Microstructure and vacuum tribology of TiC–Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition10.1016/S0257-8972(02)00138-X ↗