Application of artificial neural networks to predict the hardness of Ni–TiN nanocoatings fabricated by pulse electrodeposition
Source abstract
Abstract
Abstract A three-layer backward propagation (BP) model was used to predict the hardness of Ni–TiN nanocoatings fabricated by pulse electrodeposition. The effect of plating parameters, namely, TiN particle concentration, current density, pulse frequency, and duty ratio on the hardness of Ni–TiN nanocoatings was investigated. The morphology, structure, and hardness of Ni–TiN nanocoatings were verified using scanning electron microscopy, white-light interfering profilometry, high-resolution transmission emission microscopy, and Rockwell hardness testing. The results indicated that the surface roughness of the Ni–TiN nanocoating is approximately 0.12 μm. The average grain sizes of Ni and TiN on the Ni–TiN nanocoating are 62 and 30 nm, respectively. The optimum conditions for fabricating Ni–TiN nanocoatings based on the greatest hardness of Ni–TiN deposits are as follows: TiN particle concentration of 8 g/L, current density of 5 A/dm 2 , pulse frequency of 80 Hz, and duty ratio of 0.7. We conclude that the BP model, with a maximum error of approximately 1.03%, can effectively predict the hardness of Ni–TiN nanocoatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Electrolytic processing for plating coatings and treating metal and alloys10.1134/S2070205114010092 ↗
2. Mass transfer and doping during electrolyte-plasma treatment of cast iron10.1134/1.1573301 ↗
3. Properties and structure of oxidized coatings deposited onto Al–Cu and Al–Mg alloys10.1134/S1063784212060217 ↗
4. Pulse electrodeposition of Ni–SiC nanocomposite10.1016/S0167-577X(01)00371-8 ↗
5. Pulse electrodeposition, characterization, and corrosion behavior of Ni–Si3N4 composites10.1007/s11665-015-1451-z ↗
6. Preparation and corrosion assessment of electrodeposited Ni–SiC composite thin films10.1016/j.ceramint.2013.09.100 ↗
7. Microstructure and wear behaviour of pulse electrodeposited Ni–CNT composite coatings10.1179/1743294410Y.0000000001 ↗
8. Effect of stirring rate on the microstructure and microhardness of Ni–CeO2 nanocomposite coating and investigation of the corrosion property10.1016/j.surfcoat.2011.01.057 ↗
9. Preparation and corrosion behavior of electrodeposited Ni–TiN composite coatings10.1016/j.ijrmhm.2012.07.002 ↗
10. Forecast for microhardness of the Ni–TiN nanocomposite coating based on RBF neural network
11. Electrodeposition and corrosion behavior of nanostructured Ni–TiN composite films10.1016/S1003-6326(11)60998-9 ↗
12. Preparation and numerical simulation of Ni–SiC composite coatings deposited by electrode position10.19026/rjaset.5.4243 ↗
13. Preparation and corrosion behavior of electrodeposited Ni–TiN composite coatings10.1016/j.ijrmhm.2012.07.002 ↗
14. Application of an inverse neural network model for the identification of optimal amendment to reduce copper toxicity in phytoremediated contaminated soils10.1016/j.gexplo.2013.09.002 ↗
15. A neural network algorithm for cloud fraction estimation using NASA-Aura OMI VIS radiance measurements10.5194/amt-6-2301-2013 ↗
16. Prediction of density, porosity and hardness in aluminum–copper-based composite materials using artificial neural network10.1016/j.jmatprotec.2008.02.066 ↗
17. Prediction of porosity percent in Al–Si casting alloys using ANN10.1016/j.msea.2006.05.150 ↗
18. Process optimization of ultrasonic-electrodeposition of Ni–nano TiN composite coatings by artificial neural network
19. Influence of pulse parameters on the microstructure and microhardness of nickel electrodeposits10.1016/j.surfcoat.2007.08.023 ↗
20. Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics10.1016/j.colsurfa.2007.07.027 ↗
21. The influence of pulse plating parameters on the hardness and wear resistance of nickel–alumina composite coatings10.1016/j.surfcoat.2004.09.023 ↗
22. Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings10.1016/j.apsusc.2010.04.088 ↗