journal article·2024-06Open access

Laser-directed energy deposition of bioactive glass on Ti-6Al-7Nb titanium alloy substrate with highly refined grain structure

Szymon Bajda, Katarzyna Cholewa-Kowalska, Michal Krzyzanowski, Michal Dziadek, Mateusz Kopyscianski, Yijun Liu, Adarsh Rai

Abstract

The bioactive glass S520 was applied to an ultrafine-grained Ti-6Al-7Nb titanium alloy by a laser-directed energy deposition (LDED) process, in order to create a biocompatible material without potentially toxic vanadium for use in load bearing biomedical implants. The laser cladding process influenced the substrate's structure by melting the metallic material at the surface and infusing it with bioactive glass. Subsequently, the melted titanium alloy crystallised, resulting in the formation of relatively large grains. Deeper into the material, laser-induced heat triggered martensitic transformation, leading to the formation of α′ acicular martensite. In the lower regions of the HAZ, a distinctive band with refined grains was identified. Detection of certain amounts of Al directly in the bioactive glass raises concerns about potential toxicity as the glass dissolves in the human body. The nearly complete reduction in P concentration after 14 days highlights the high bioactivity of the material produced.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Titanium alloy selection for biomedical application using weighted sum model methodology10.1016/j.matpr.2022.08.494 ↗
2. Biomedical applications of titanium and its alloys10.1007/s11837-008-0031-1 ↗
3. Preparation and properties of multilayer Ca/P bio-ceramic coating by laser cladding10.3390/coatings11080891 ↗
4. Random spectrum fatigue performance of severely plastically deformed titanium for implant dentistry applications10.1016/j.jmbbm.2018.04.012 ↗
5. J.W. Nicholson, Titanium alloys for dental implants: a review, Prosthesis 2020, Vol. 2, Pages 100–116 2 (2020) 100–116. doi:https://doi.org/10.3390/PROSTHESIS2020011.10.3390/prosthesis2020011 ↗
6. Implant biomaterials: a comprehensive review10.12998/wjcc.v3.i1.52 ↗
7. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
8. Is titanium alloy Ti-6Al-4V cytotoxic to gingival fibroblasts—a systematic review10.1002/cre2.444 ↗
9. Vanadium carcinogenic, immunotoxic and neurotoxic effects: a review of in vitro studies, Toxicol Mech
10. F. Peat, R. Coomber, A. Rana, A. Vince, Vanadium allergy following total knee arthroplasty, BMJ Case Rep. 2018 (2018) bcr-2017-222092. doi:https://doi.org/10.1136/bcr-2017-222092.10.1136/bcr-2017-222092 ↗
11. Corrosion behavior of Ti-6Al-7Nb alloy in biological solution for dentistry applications10.1016/S1452-3981(23)18165-X ↗
12. Corrosion behaviour of polished and sandblasted titanium alloys in PBS solution
13. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
14. A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties10.1016/j.jmrt.2022.01.050 ↗
15. Review of bioactive glass: from Hench to hybrids10.1016/j.actbio.2012.08.023 ↗
16. Arts · 2017
17. Ylänen · 2018
18. A sol-gel based bioactive glass coating on laser textured 316L stainless steel substrate for enhanced biocompatability and anti-corrosion properties10.1016/j.ceramint.2022.03.144 ↗
19. Bioactive glass coatings on metallic implants for biomedical applications
20. 3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings10.1016/j.jmbbm.2016.02.023 ↗
21. Directed energy deposition processes10.1007/978-1-4939-2113-3_10 ↗
22. Enhanced tribological performance of laser directed energy deposited Inconel 625 achieved through laser surface remelting10.1016/j.surfcoat.2023.130345 ↗
23. Microstructure and fracture behavior of 90W-7Ni-3Fe alloy fabricated by laser directed energy deposition10.1016/j.jallcom.2021.158975 ↗
24. Laser cladding as repair technology for Ti–6Al–4V alloy: influence of building strategy on microstructure and hardness10.1016/j.matdes.2015.07.035 ↗
25. Laser cladding of bioactive glass coatings10.1016/j.actbio.2009.08.010 ↗
26. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
27. Fundamentals of superior properties in bulk nanoSPD materials
28. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
29. Microstructure and mechanical properties of ultrafine-grained titanium processed by multi-pass ECAP at room temperature using core–sheath method10.1557/jmr.2018.291 ↗
30. Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation10.1016/j.actamat.2005.07.031 ↗
31. Effect of equal channel angular pressing (ECAP) on wear behavior of Al-7075 alloy, Procedia
32. Wear resistance and electroconductivity in a Cu–0.3Cr–0.5Zr alloy processed by ECAP10.1007/s10853-016-0331-8 ↗
33. Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing10.1016/j.msea.2014.09.099 ↗
34. Current advances in enhancement of wear and corrosion resistance of titanium alloys – a review
35. Recent development in grain refinement by hydrostatic extrusion10.1007/s10853-008-2810-z ↗
36. Novel ultrafine-grained β-type Ti-28Nb-2Zr-8Sn alloy for biomedical applications10.1002/jbm.a.36679 ↗
37. Mechanical properties and corrosion resistance of two new titanium alloys for orthopaedics applications10.1016/j.matpr.2022.09.394 ↗
38. Equal-channel angular pressing (ECAP)
39. Laser induced porosity and crystallinity modification of a bioactive glass coating on titanium substrates10.1115/1.4029566 ↗
40. Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants10.1016/j.actbio.2007.09.008 ↗
41. Compositionally graded doped hydroxyapatite coating on titanium using laser and plasma spray deposition for bone implants10.1016/j.actbio.2018.11.041 ↗
42. Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure10.1016/j.jmbbm.2021.104519 ↗
43. Influence of annealing on the structure and mechanical properties of ultrafine-grained alloy Ti-6Al-7Nb, processed by severe plastic deformation
44. Influence of grain boundary misorientations on the mechanical behavior of a near-α Ti-6Al-7Nb alloy processed by ECAP10.1016/j.matlet.2016.12.083 ↗
45. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
46. Effect of laser surface remelting on the corrosion behavior of commercially pure titanium sheet10.1016/S0921-5093(02)00477-X ↗
47. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review10.1002/adem.201500419 ↗
48. Laser coating of bioactive glasses on bioimplant titanium alloys10.1111/ijag.12642 ↗
49. Metal/glass interface metallurgical characterisation of a multiscale bioactive surface structure on Ti-6Al-4V alloy with Laser Cladding
50. On the fabrication of bioactive glass implants for bone regeneration by laser assisted rapid prototyping based on laser cladding10.1016/j.ceramint.2015.10.009 ↗
51. Three-dimensional bioactive glass implants fabricated by rapid prototyping based on CO2laser cladding10.1016/j.actbio.2011.05.023 ↗
52. F. Lusquiños, F. Arias-González, J. Penide, J. del Val, R. Comesaña, F. Quintero, A. Riveiro, M. Boutinguiza, M.J. Pascual, A. Durán, J. Pou, Laser bioengineering of glass-titanium implants surface, in: M.F.P.C. Martins Costa (Ed.), 8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications, 2013: p. 8785E3. doi:https://doi.org/10.1117/12.2026115.10.1117/12.2026115 ↗
53. Highly bioactive P2O5-Na2O-CaO-SiO2glass-ceramics10.1016/S0022-3093(01)00822-5 ↗
54. Bioactive borate glass coatings for titanium alloys10.1007/s10856-008-3419-0 ↗