journal article·2004-01Open access

Microstructure, mechanical properties and cutting performance of superhard (Ti,Si,Al)N nanocomposite films grown by d.c. reactive magnetron sputtering

S Carvalho, E Ribeiro, L Rebouta, C Tavares, J.P Mendonça, A Caetano Monteiro, N.J.M Carvalho, J.Th.M De Hosson, A Cavaleiro

Abstract

This paper reports on the optimization of coating properties to improve the performance of tools in severe cutting conditions. Tungsten carbide tools coated with (Ti,Si,AI)N films deposited by d.c. reactive magnetron sputtering have been investigated. The structure and the hardness of the coated samples were analyzed by X-ray diffraction (XRD) and depth-sensing indentation, respectively. XRD results revealed a structure indexed to fcc TiN. The tool life and tool failure modes were examined for various cutting conditions. A promising wear performance of the (Ti,Si,AI)N coatings was confirmed by scanning electron microscopy observations complemented with energy dispersive X-ray spectrometry analysis. At higher cutting speed (200 m/min) it seems that after turning 15 min the cutting performance of (Ti,Si,AI)N coated tools is better than that presented by the commercial multilayer coating (TiCN/Al(2)O(3)/TiN)-which was used as a reference. Also regarding the final surface finish of the steel workpiece, the (Ti,Si,AI)N coatings outperformed the commercial tool, considering that the roughness of the workpiece is smaller in the former case (4 mum) than that measured in the latter one (12 mum). (C) 2003 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Buljan · Wear · 1989 · 133 · 30910.1016/0043-1648(89)90044-6 ↗
2. Silva · Wear · 1991 · 148 · 6910.1016/0043-1648(91)90207-B ↗
3. Wittmer · J. Appl. Phys. · 1981 · 52 · 665910.1063/1.328659 ↗
4. Holubar · Surf. Coat. Technol. · 1999 · 120–121 · 18410.1016/S0257-8972(99)00483-1 ↗
5. Yoshida · Diam. Relat. Mater. · 1996 · 5 · 50110.1016/0925-9635(96)80068-9 ↗
6. McIntyre · J. Appl. Phys. · 1990 · 67 · 154210.1063/1.345664 ↗
7. Hofmann · Surf. Interf. Anal. · 1988 · 12 · 32910.1002/sia.740120602 ↗
8. Veprek · Surf. Coat. Technol. · 1997 · 97 · 1510.1016/S0257-8972(97)00279-X ↗
9. C. Mitterer, P.H. Mayrhofer, M. Beschliesser, P. Losbichler, P. Warbichler, F. Hofer, et al., Paper BP—16 presented at ICMCTF'99, Surf. Coat. Technol. 120–121 (1999) 40510.1016/S0257-8972(99)00489-2 ↗
10. Sun · J. Appl. Phys · 1997 · 81 · 65610.1063/1.364133 ↗
11. F. Vaz, Preparação e Caracterização de Revestimentos Duros Nanoestruturados de Ti1−xSixNy, preparados por Pulverização Catódica Reactiva em Magnetrão, Tese de Doutoramento, Univeridade do Minho, 2000
12. Niederhofer · Surf. Coat. Technol. · 1999 · 120–121 · 17310.1016/S0257-8972(99)00451-X ↗
13. Carvalho · Surf. Coat. Technol. · 2001 · 142–144 · 11010.1016/S0257-8972(01)01242-7 ↗
14. Ribeiro · Surf. Coat. Technol. · 2002 · 152 · 51510.1016/S0257-8972(01)01578-X ↗
15. Carvalho · Surf. Coat. Technol. · 2002 · 172 · 10910.1016/S0257-8972(03)00323-2 ↗
16. Carvalho · Thin Solid Films · 2001 · 398–399 · 39110.1016/S0040-6090(01)01348-7 ↗
17. Vaz · 1997 · 501
18. Knotek · J. Vac. Sci. Technol. A · 1986 · 4 · 269510.1116/1.573708 ↗
19. Vaz · Surf. Coat. Technol. · 1999 · 120–121 · 16610.1016/S0257-8972(99)00450-8 ↗
20. Musil · Thin Solid Films · 2000 · 365 · 10410.1016/S0040-6090(00)00653-2 ↗
21. Petrov · Appl. Phys. Lett. · 1993 · 63 · 3610.1063/1.109742 ↗
22. J. Paulo Davim, in: Almedina (Ed.), Princı́pios de Maquinagem, Coimbra, 1995, p. 126
23. Jawaid · J. Mater. Process. Technol. · 2001 · 116 · 210.1016/S0924-0136(01)00850-0 ↗
24. Ezugwu · J. Mater. Process. Technol. · 1992 · 33 · 42910.1016/0924-0136(92)90277-Y ↗
25. Wang · Surf. Coat. Technol. · 1999 · 120–121 · 38810.1016/S0257-8972(99)00452-1 ↗
26. V.A. Richter, M. Ruthendorf, Composition, microstructure, properties and cutting performance of cermets, EURO PM99, 1999, p. 229
27. Vaz · Surf. Coat. Technol. · 1998 · 98 · 91210.1016/S0257-8972(97)00127-8 ↗
28. Tönshoff · Surf. Coat. Technol. · 1998 · 108–109 · 53510.1016/S0257-8972(98)00637-9 ↗
29. Koehler · Phys. Rev. B · 1970 · 2 · 54710.1103/PhysRevB.2.547 ↗
30. S. PalDey, S.C. Deevi, Mat. Sci. Eng., in press