Degradation and crystalline reorganization of hureaulite crystals during the manganese phosphating of a high strength steel
Source abstract
Abstract
Abstract This work shows that the manganese phosphating of steel is a cyclic process where crystalline reorganization is a critical stage in the development of phosphate conversion coatings. It is shown that oscillations in the manganese rich hureaulite crystal size are produced during the crystalline reorganization stage, which is related to the changes in the coating weight reported previously by various authors due to the degradation–dissolution of the crystalline layer of manganese rich hureaulite. The presence of defects (pits) in the prismatic crystals promotes their degradation due to an acidification process by differential aeration. This localized acidification process produces a composition change in the prismatic crystals that triggers a crystalline reorganization of the coating which results in a change of morphology of the hureaulite which, in turn, leads to the formation of an iron rich hureaulite inner layer. The parabolic growth of the coating may be due to the formation of this layer due to a localized attack on the steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Effects of temperature and applied potential on the microstructure and electrochemical behavior of manganese phosphate coating10.1016/j.surfcoat.2006.06.010 ↗
2. Effect of heat treatment on the microstructure and electrochemical behavior of manganese phosphate coating10.1016/j.matchemphys.2006.12.012 ↗
3. Phosphate conversion coating on steel10.1007/BF00552245 ↗
4. Crystaline corrosion and protective layers on metals, and their epitaxial relations
5. Rausch · 1990 · 416
6. Surface pretreatment by phosphate conversion coating — a review
7. ASM International · 1989 · Vol. 9
8. Dry friction of manganese phosphate coatings on steel and cast iron10.1016/0300-9416(74)90009-1 ↗
9. The effect of phosphating on the friction and wear properties of grey cast iron10.1016/0043-1648(77)90113-2 ↗
10. The mechanism of phosphating of steel10.1016/S0010-938X(72)90118-7 ↗
11. Seizure behaviour of manganese phosphate coatings according to the process conditions10.1016/S0301-679X(97)00019-4 ↗
12. Formation of zinc phosphate coating by anodic electrochemical treatment10.1016/j.surfcoat.2005.09.017 ↗
13. Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic10.1016/j.porgcoat.2008.11.009 ↗
14. Variations de la densité des couches phosphatiques sur le fer et de leur valeur protectrice suivant le temps employé á les produire
15. The effect of grit blasting and inmersion time in coating weights in the phosphating process
16. Contribution á l'etude de la phosphatation of métaux ferreux
17. Study on the growth and corrosion resistance of manganese phosphate coatings on 30CrMnMoTi alloy steel
18. Double-layered manganese phosphate conversion coating on magnesium alloy AZ91D: insights into coating formation, growth and corrosion resistance10.1016/j.surfcoat.2012.12.005 ↗
19. Effects of Zn2+ concentration and pH on the zinc phosphate conversion coatings on AZ31 magnesium alloy10.1016/j.corsci.2013.05.005 ↗
20. Alvarado Macías · 2012
21. Understanding the nature of the hot dip steel phosphating process with manganese
22. Estimation of thermodynamic properties of mineral carbonates at high and low temperatures from the sum of polyhedral contributions10.1016/0016-7037(94)90261-5 ↗
23. Estimating the thermodynamic properties of phosphate minerals at high and low temperature from the sum of constituent units10.3989/egeol.39849.060 ↗
24. The effects to the structure and electrochemical behavior of zinc phosphate conversion coatings with ethanolamine on magnesium alloy AZ91D10.1016/j.electacta.2009.06.048 ↗
25. Characteristics of manganese phosphate coating for wear-resistance applications10.1016/0043-1648(79)90159-5 ↗
26. The degradation of phosphate conversion coatings by electrochemically generated hydroxide10.1016/j.corsci.2011.10.004 ↗
27. The alkaline stability of phosphate coatings I: ICP atomic emission spectroelectrochemistry10.1016/S0010-938X(03)00182-3 ↗
28. The alkaline stability of phosphate coatings II: in situ Raman spectroscopy10.1016/S0010-938X(03)00183-5 ↗
29. Structure and formation mechanism of phosphate conversion coating on die-cast AZ91D magnesium alloy10.1016/j.corsci.2007.08.007 ↗
30. Effect of microstructure on the zinc phosphate conversion coatings on magnesium alloy AZ9110.1016/j.apsusc.2012.09.119 ↗