journal article·2018-06

New environmentally friendly coatings for hot forging tools

A. Dubois, M. Dubar, C. Debras, K. Hermange, C. Nivot, C. Courtois

Publisher page

Abstract

Abstract Two alumina coatings are developed to protect tool surface in hot forging: pure γ-alumina matrix loaded with α-alumina particles and pure γ-alumina matrix loaded with h-BN particles. The coatings are deposited on stainless tools by using a sol-gel procedure. Adherent coatings are obtained with an average thickness ranging from 200 to 300 nm. The coatings are tested according to the conditions of contact encountered in hot forging processes: coated tools slide against the surface of hot specimens where they generate a plastic strain. The design of experiment involves specimens heated to 1100 °C, lubricated and unlubricated contact, small and large specimen plastic strain, uncoated and sol-gel coated tools. Tests results are the Coulomb's coefficient of friction, SEM-EDS and roughness measurement of the tool surfaces after a sliding length of 40 mm. Results show that the tested sol-gel coatings remain firmly bonded to the tool surface. Compared to uncoated tools, alumina sol-gel coatings limit the amount of material transfer from specimen surface to tool surface. Loading the alumina sol-gel coating with h-BN particles significantly improves its friction behaviour: the friction coefficient is lower and sticking phenomena are reduced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Debras · 2016
2. Review of selected methods of increasing the life of forging tools in hot die forging processes10.1016/j.acme.2016.06.001 ↗
3. A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry10.1016/j.triboint.2012.02.018 ↗
4. High-temperature friction and wear behaviour of different tool steels during sliding against Al–Si-coated high-strength steel10.1016/j.triboint.2007.07.013 ↗
5. Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming10.1016/j.wear.2011.02.011 ↗
6. Experimental study of wear behaviour of hot forging tool steels under dry conditions: 40CrMoV13 against C35E10.1023/A:1014795406346 ↗
7. Tribological performance of surface engineered tool steel at elevated temperatures10.1016/j.ijrmhm.2009.07.009 ↗
8. Methodology for service life increase of hot forging tools10.1016/S0924-0136(98)00357-4 ↗
9. Die life considering the deviation of the preheating billet temperature in hot forging process10.1016/j.finel.2004.11.005 ↗
10. Effects of lubricant and lubrication parameters on friction during hot steel forging10.1007/s12289-008-0162-5 ↗
11. Effect of surface treatments and lubricants for warm forging die life10.1016/S0924-0136(01)00693-8 ↗
12. Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hots tamping of a high strength boron steel10.1016/j.wear.2012.07.001 ↗
13. Warm and hot upsetting sliding test: tribology of metal processes at high temperature10.1016/j.proeng.2014.10.265 ↗
14. Wear analysis of tools in cold forging: PVD versus CVD TiN coatings10.1016/j.wear.2005.01.006 ↗
15. State of the art in hard coatings for carbide cutting tools10.1016/S0257-8972(96)03061-7 ↗
16. Sol–gel prepared Al2O3 coatings for the application as tritium permeation barrier10.1016/j.fusengdes.2010.01.021 ↗
17. Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests10.1016/j.surfcoat.2010.07.053 ↗
18. Mechanical characterization of a prototype a-C:Cr,Si and its tribological behaviour at high temperature10.1016/j.triboint.2016.01.048 ↗
19. Possibilities of application measurement techniques in hot die forging processes10.1016/j.measurement.2017.07.003 ↗
20. Chraracterization of low temperature CrN ad TiN (PVD) hard coatings10.1016/0257-8972(95)08214-X ↗
21. Plasma CVD of alumina—unsolved problems10.1016/j.vacuum.2005.08.018 ↗
22. Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique10.1016/j.apsusc.2012.04.041 ↗
23. Characterization of sol-gel synthesized lead-free (1 – x)Na0.5Bi0.5TiO3-xBaTiO3-based ceramics10.1016/j.jallcom.2011.06.085 ↗
24. Development of a roadmap for advanced ceramics: 2010–202510.1016/j.jeurceramsoc.2008.10.015 ↗
25. High temperature oxidation resistance of FeCrAl alloys covered with ceramic SiO2–Al2O3 coatings deposited by sol–gel method10.1016/j.corsci.2008.09.012 ↗
26. Characterization of ceramic sol–gel coatings as an alternative chemical conversion treatment on commercial carbon steel10.1016/j.electacta.2008.11.023 ↗
27. Corrosion resistance of stainless steel coated with sol-gel silica10.1016/S0022-3093(00)00155-1 ↗
28. Sol–gel coatings for corrosion protection of metals10.1039/b419153f ↗
29. Dry and wet corrosion behaviour of AISI 304 stainless steel coated by sol-gel ZrO2-CeO2 films10.1016/S0040-6090(95)08515-7 ↗
30. Development of conversion coating on mild steel prior to sol gel nanostructured, Al2O3 coating for enhancement of corrosion resistance10.1016/j.surfcoat.2011.04.087 ↗
31. Sol–gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
32. Sol-gel coatings for high precision optical molds10.1016/S0007-8506(07)60489-2 ↗
33. Characterisation of multilayered sol–gel silica coatings on aluminium–SiC composites10.1016/j.surfcoat.2006.09.004 ↗
34. Evaluation of the mechanical properties of sol–gel-deposited titania films using ultra-micro-indentation method10.1016/S0043-1648(00)00372-0 ↗
35. Structural, mechanical and corrosion resistance properties of Al2O3–CeO2 nanocomposites in silica matrix on Mg alloys by a sol–gel dip coating technique10.1016/j.surfcoat.2006.07.002 ↗
36. Pitting of AISI 304L stainless steel coated with nanostructured sol–gel alumina coatings in chloride containing acidic environments10.1016/j.corsci.2009.08.037 ↗
37. Effect of sintering temperatures on corrosion and wear properties of sol–gel alumina coatings on surface pre-treated mild steel10.1016/j.corsci.2007.10.002 ↗
38. Wear resistant alumina coatings produced by a sol–gel process10.1016/j.surfcoat.2005.11.014 ↗
39. Sol-gel alumina coatings on stainless steel for wear protection10.1007/s10971-006-6470-7 ↗
40. Characterization and tribological investigation of sol-gel Al2O3 and doped Al2O3 films10.1016/S0955-2219(02)00063-8 ↗
41. Deposition of alumina coatings on monocrystalline diamonds by sol-gel techniques10.1016/S0925-9635(00)00490-8 ↗
42. Elastoplastic finite element analyses of an upsetting-sliding test for the determination of friction at medium and high contact pressure10.1016/0301-679X(96)00006-0 ↗
43. Dubar · 2015 · 23
44. Optimization of the upsetting-sliding test parameters for the determination of friction laws at medium and high contact pressures10.1016/0924-0136(95)02195-7 ↗
45. Three selection criteria for the cold metal forming lubricating oils containing extreme pressure agents10.1016/S0924-0136(98)00109-5 ↗
46. Metal forming and lubrication
47. Numerical identification of coating bulk behaviour in metal forming10.1016/S0045-7949(00)00198-X ↗
48. Aciers à outils – Mise en œuvre
49. Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol-gel route on stainless steel10.1016/j.surfcoat.2013.06.037 ↗
50. Tempering of AISI 403 stainless steel10.1016/0921-5093(93)90388-U ↗
51. Optical properties of sol-gel deposited Al2O3 films10.1016/S0927-0248(99)00054-9 ↗
52. The effect of ceramic nanoparticles on tribological properties of alumina sol–gel thin coatings10.1016/j.ceramint.2009.06.024 ↗
53. Boron nitride (BN) and BN composites for high-temperature applications10.1016/j.jeurceramsoc.2007.09.005 ↗
54. Boron nitride as a lubricant additive10.1016/S0043-1648(99)00146-5 ↗
55. Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications10.1016/j.wear.2010.11.060 ↗
56. A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles—an additive in porous sliding bearings for a car clutch10.1016/j.wear.2008.11.020 ↗
57. Ellipsometric characterization of an AISI 304 stainless steel protective coating10.1016/S0040-6090(97)00013-8 ↗
58. A comparative study of heat treatment temperature influence on the thickness of zirconia sol–gel thin films by three different techniques: SWE, SEM and AFM10.1016/j.surfcoat.2011.11.030 ↗
59. Daouben · 2009
60. An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization10.1016/j.ijplas.2013.08.011 ↗
61. Improvement in the predictivity of squeal simulations: uncertainty and robustness10.1016/j.jsv.2014.03.011 ↗