An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic β Ti-Fe-Nb-Sn composite for implants
Source abstract
Abstract
[EN] High mechanical strength (1800¿2500 MPa), elastic modulus (50¿110 GPa) close to that of human bone and good corrosion resistance are some characteristics of ultrafine eutectic Ti-based nanocomposite alloys. This is explained due to a combination of soft ß-Ti (bcc) matrix and hard/refined TiFe and/or Ti3Sn intermetallic particles. The present study focuses on the production and characterization of Ti-Fe-Nb-Sn eutectic alloys using biocompatible ß-stabilizer elements, such as Nb, Fe and Sn. Different fabrication techniques based on rapid solidification may be highlighted considering the application of these alloys as implant materials. In the present investigation, the processing routes comprise single tracks and coatings (overlapped tracks) by laser melting of pre-alloyed powders of the Ti66Fe20Nb8Sn6 alloy deposited into a Ti substrate. To select this composition (i.e., the Ti66Fe20Nb8Sn6 alloy), three Ti-Fe-Nb based chemistries (Ti63Fe23Nb8Sn6, Ti60Fe23Nb8Sn9 and Ti66Fe20Nb8Sn6) were originally generated under bulk conditions by using a suction casting apparatus. These alloys were further evaluated. All samples were analyzed by metallography, X-ray diffraction (XRD), scanning electron microscopy (SEM-EBSD and SEM-EDS), microhardness, nanohardness and elastic modulus. The results showed that the proportions of the formed TiFe and Ti3Sn intermetallic particles dispersed within the soft ß-Ti matrix play a fundamental role on the final properties. Lower elastic modulus (E ~72 GPa) is associated with the Ti66Fe20Nb8Sn6 bulk alloy. The laser clad coatings showed a broad range of nanohardness (4.8¿8.0 GPa) and elastic modulus (98¿150 GPa) depending on the related laser power and scanning speeds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Novel Ti-base nanostructure–dendrite composite with enhanced plasticity10.1038/nmat792 ↗
2. Corrosion behaviour of a nanocrystalline FeA18 alloy10.1016/0965-9773(95)00234-0 ↗
3. High strength Ti–Fe–Sn ultrafine composites with large plasticity10.1016/j.scriptamat.2007.03.031 ↗
4. High strength Ti–Fe–(In, Nb) composites with improved plasticity10.1016/j.intermet.2009.08.005 ↗
5. Effect of cooling rate on Ti–Cu eutectoid alloy microstructure10.1016/j.msec.2008.09.007 ↗
6. High-strength Ti-base ultrafine eutectic with enhanced ductility10.1063/1.2105998 ↗
7. Investigation of high strength metastable hypereutectic ternary Ti–Fe–Co and quaternary Ti–Fe–Co–(V, Sn) alloys10.1016/j.jallcom.2006.08.335 ↗
8. High resolution transmission electron microscopy study of the hardening mechanism through phase separation in a Ti–35Nb–7Zr–5Ta alloy for implant applications10.1016/j.actbio.2009.11.010 ↗
9. Hexagonal martensite decomposition and phase precipitation in Ti–Cu alloys10.1016/j.matdes.2011.03.040 ↗
10. Effects of composition on solidification microstructure of cast titanium alloys10.4028/www.scientific.net/MSF.649.183 ↗
11. A development of Ti-based bulk metallic glass10.1016/j.msea.2003.10.115 ↗
12. Structure and properties of Titanium-25 Niobium-x Iron alloys10.1023/A:1015798011434 ↗
13. Effects of composition and heat treatment on the mechanical behavior of Ti–Cu alloys10.1016/j.matdes.2013.10.050 ↗
14. Microstructure of directionally solidified Ti-Fe eutectic alloy with low interstitial and high mechanical strength10.1016/j.jcrysgro.2011.07.007 ↗
15. Fabrication of Ni-free Ti-based bulk-metallic glassy alloy having potential for application as biomaterial, and investigation of its mechanical properties, corrosion, and crystallization behavior10.1557/jmr.2007.0154 ↗
16. Biocompatibility of Ti- alloys for long-term implantation10.1016/j.jmbbm.2012.11.014 ↗
17. Nanostructured β-phase Ti–31.0Fe–9.0Sn and sub-μm structured Ti–39.3Nb–13.3Zr–10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances10.1016/j.msec.2012.07.016 ↗
18. Investigation of the mechanical properties of Ti-Fe-Sn ultrafine eutectic composites by dendrite phase selection10.1007/s12540-014-3003-8 ↗
19. High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure10.1088/1742-6596/240/1/012103 ↗
20. High-strength binary Ti-Fe bulk alloys with enhanced ductility10.1557/JMR.2004.0462 ↗
21. Heterogeneous eutectic structure in Ti-Fe-Sn alloys10.1016/j.intermet.2010.11.030 ↗
22. One-sided laser beam welding of autogenous T-joints for 6013-T4 aluminium alloy10.1016/j.matdes.2014.09.055 ↗
23. Influence of phase transformations on dynamical elastic modulus and anelasticity of beta Ti-Nb-Fe alloys for biomedical applications10.1016/j.jmbbm.2015.02.030 ↗
24. Formation of Ti-Zr-Cu-Ni bulk metallic glasses10.1063/1.360537 ↗
25. Kurz · 1992
26. High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy10.1016/j.jallcom.2015.02.140 ↗
27. Calculation of phase diagrams for the meta- stable Al–Fe phases forming in direct-chill (DC)-cast aluminum alloy ingots10.1016/S0364-5916(98)00020-0 ↗
28. The transformation hardening of steel surfaces by laser beams-I: hypo-eutectoid steels10.1016/0001-6160(84)90175-5 ↗
29. Formation of Fe-based glassy matrix composite coatings by laser processing10.1016/j.surfcoat.2013.12.049 ↗
30. Microalloying effect of Si on mechanical properties of Ti based bulk metallic glass