journal article·2022-10Open access

Influence of surface preheating and pretreatment on the adhesion of laser-melted PEEK to aluminum substrates

Marius Dahmen, Christian Vedder, Marcel Speckens, Jochen Stollenwerk, Peter Loosen

Abstract

The high-performance polymer Polyether ether ketone (PEEK) is commonly used as friction-reducing coating in many areas of mechanical engineering. However, the coating of temperature-sensitive components is only possible to a limited extent due to the high hardness loss of the component during conventional oven processing at elevated temperatures to melt the PEEK layers. Alternatively, laser radiation can be used to melt the particulate PEEK layers and simultaneously reduce the thermal load on the substrate. A key challenge of these processes, however, lies in ensuring sufficient adhesion between the molten PEEK layer and the metal substrate. This study addresses the laser pretreatment of EN AW 6082 aluminum and investigates how the surface topography and preheating temperature of the substrate affect the adhesion behavior of the PEEK layer after laser-based melting as well as the hardness loss of the substrate during laser melting.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposite Synthesis and Irradiation · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Deposition of PEEK coatings using a combined flame spraying–laser remelting process10.1016/j.surfcoat.2005.11.094 ↗
2. Sändker · 2018
3. Laser-based process for polymeric tribological coatings on lightweight components10.1016/j.surfcoat.2017.06.075 ↗
4. Laser-based functionalization of electronic multi-material-layers for embedded sensors10.2351/1.4983267 ↗
5. Hardness, adhesion index and microstructure of PEEK coating on Al or Fe substrate by LVOF flame spray
6. Effect of surface roughness parameters on thermally sprayed PEEK coatings10.1016/j.surfcoat.2010.04.026 ↗
7. A ray-tracing analysis of the absorption of light by smooth and rough metal surfaces10.1063/1.2738417 ↗
8. On adhesion in metal-polymer interfaces and its practical use10.1002/actp.1989.010400309 ↗
9. Zisman · 1964
10. 2011
11. Adhesion and adhesives interactions at interfaces10.1177/875608798500100210 ↗
12. Causes of poor adhesion: weak boundary layers10.1021/ie51403a010 ↗