Maintenance and control of coating baths: Rapid and simultaneous hypophosphite and phosphite determination in a Ni P deposition bath
Source abstract
Abstract
In this work, a method based on UV–VIS spectrophotometry using the molybdenum blue reaction is described to monitor hypophosphite and phosphite levels in nickel electroless baths. Nickel is one of the most employed metals in the electroless coating industry and during the deposition process the metal is reduced from Ni (II) to Ni (0). Hypophosphite is a widely employed reducing agent, which is oxidized to phosphite. Therefore, the hypophosphite concentration should be monitored in order to replenish the bath while it is being consumed maintaining an optimum concentration in order to guarantee the desired coating. Phosphite, which could interfere with the coating process, must be monitored to ensure it does not exceed a certain concentration after which the bath stops working. Although iodometric titrations are the most commonly used methods to control hypophosphite and phosphite concentrations, these are time- and reagent-consuming. Thus, with the aim of developing a more appropriate methodology a colorimetric determination was carried out in this work. In certain conditions, the hypophosphite reacts with molybdenum, giving rise to a blue compound that can be measured between 390 and 1100 nm. The phosphite presence modifies the obtained spectra and that effect allows individual Partial Least Square (PLS) models to be built for each analyte. In this study, the calibration, cross-validation and external prediction relative error were always lower than 8 %, and the relative standard deviation lower than 12 %. The models were applied to real samples from two different nickel electroless baths, and the results were compared and validated using ion chromatography (IC). No significant differences were observed between the proposed and the reference methods for either of the two analytes. Therefore, the colorimetric method could be an improvement over the methods currently used for the control of the two anions in coating baths in term of saving time, money and reagents, making the coating process more efficient.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Electrochemical sensors and biosensors · Analytical chemistry methods development
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Electroless nickel plating from acid bath10.1016/S0257-8972(99)00423-5 ↗
2. State of art review on nickel-based electroless coatings and materials10.1007/s40735-021-00568-7 ↗
3. Parkinson · 1997
4. Electroless Ni–P composite coatings10.1023/A:1025572410205 ↗
5. Improved microhardness and wear resistance of the as-deposited electroless Ni-P coating10.1016/j.surfcoat.2008.06.180 ↗
6. The electroless nickel plating bath: effect of variables on the process
7. Study on adhesion failure of electrically conducting electroless Ni-P coating on polyethylene terephthalate substrate10.1016/j.matpr.2022.07.288 ↗
8. A facile method of nickel electroless deposition on various neutral hydrophobic polymer surfaces10.1016/j.apsusc.2013.06.108 ↗
9. Summary of existing models of the Ni-P coating electroless deposition process10.1002/kin.20810 ↗
10. On the kinetics of copper electroless plating with hypophosphite reductant10.1179/1743294415Y.0000000066 ↗
11. Comparison of the coating properties and corrosion rates in electroless Ni-P/PTFE composites prepared by different types of surfactants10.1016/j.apsusc.2011.05.043 ↗
12. Electroless Ni-P coatings: preparation and evaluation of fracture toughness and scratch hardness10.5402/2011/693046 ↗
13. Characterization of electroless Ni-P coating prepared on a wrought ZE10 magnesium alloy10.3390/coatings8030096 ↗
14. Marra medium and high phosphorous Ni-P coatings obtained via an electroless approach: optimization of solution formulation and characterization of coatings10.3390/coatings13091490 ↗
15. Influence of hypophosphite on efficiency and coating qualities of electroless Ni-P deposits on magnesium alloy AZ91D10.1016/S1452-3981(23)11063-7 ↗
16. The influence of phosphorus content on the microstructure and specific capacitance of etched electroless Ni-P coatings10.1016/j.surfcoat.2019.04.009 ↗
17. Electroless nickel plating – a review10.1007/s12633-015-9367-7 ↗
18. Recovery of spent electroless nickel plating bath by electrodialysis10.1016/S0376-7388(98)00381-0 ↗
19. The properties of electroless nickel
20. Recovery of high purity ferric phosphate from a spent electroless nickel plating bath10.1039/C3GC41779D ↗
21. Stoichiometric measurements in nickel-hypophosphite baths for electroless deposition10.1016/0003-2670(94)80115-0 ↗
22. Advanced oxidation of hypophosphite and phosphite using a UV/H 2O2 process
23. Toledo M Electroplating Guide Automated Sample Analysis Electroplating Guide.
24. Iodometric determination of hypophosphorous and phosphorous acids10.1021/ac60080a042 ↗
25. J. Rossman, F. Portala, G. Kirner, A. Steinbach, Monitoring of nickel sulfate, hypophosphite and alkalinity in electroless nickel plating baths The Process Lab Analysis. 70771.
26. Metrohm Thermo. Titr. Application Note No. H-047 Title: Determination of Nickel by EDTA Back-Titration. 1–2.
27. Efficacy of reducing agent and surfactant contacting pattern on the performance characteristics of nickel electroless plating baths coupled with and without ultrasound10.1016/j.ultsonch.2014.01.015 ↗
28. Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristics10.1016/j.desal.2010.10.025 ↗
29. Separation of orthophosphoric, phosphorous and hypophosphorous acids using single-column ion chromatography with conductivity detection10.1016/S0021-9673(01)87045-X ↗
30. Phosphorus speciation in nickel plating baths by ion chromatography10.1016/0021-9673(95)00303-5 ↗
31. Detection of hypophosphite, phosphite, and orthophosphate in natural geothermal water by ion chromatography10.1016/j.chroma.2003.11.056 ↗
32. Ion chromatographic determination of hypophosphite, phosphite and orthophosphate ions along with chloride, nitrate and sulfate ions using indirect ultraviolet detection10.2116/analsci.6.431 ↗
33. A modified quick, easy, cheap, effective, rugged, and safe cleanup method followed by liquid chromatography-tandem mass spectrometry for the rapid analysis of perchlorate, bromate and hypophosphite in flour10.1016/j.chroma.2017.10.047 ↗
34. Analysis of reduced phosphorus in samples of environmental interest10.1021/es0401038 ↗
35. Simultaneous determination of inorganic anions, organic acids and metal cations by capillary electrophoresis10.1016/S0021-9673(98)00692-X ↗
36. Measurement of orthophosphite concentration in electroless nickel plating baths by sodium ion electrodes10.1016/S0026-0576(09)00044-0 ↗
37. Potentiometric analysis of hypophosphite in electroless nickel plating baths10.1021/ac60290a033 ↗
38. The development of iodide-based methods for batch and on-line determinations of phosphite in aqueous samples10.1016/j.talanta.2006.02.060 ↗
39. Spectrophotometric determination of phosphite in fertilizers in a flow injection system with online sample preparation10.1002/1098-2728(2000)12:6<286::AID-LRA3>3.0.CO;2-D ↗
40. Kinetics and mechanism of oxidation of hypophosphite by Waugh-type enneamolybdomanganate(IV) in perchloric acid10.1016/j.poly.2008.02.028 ↗
41. Oxidation of hypophosphite and phosphite by Anderson-type Hexamolybdocobaltate(III) anion10.1002/kin.20975 ↗
42. Thallimetric oxidations part VII: titrimetric and spectrophotometric methods for the determination of hypophosphite and ternary mixtures of hypophosphite, phosphite, and oxalate10.1139/v93-106 ↗
43. Spectrophotometric determination of sodium hypophosphite as a molybdenum blue complex10.1021/ac60086a042 ↗
44. Spectrophotometric determination of hypophosphite in the presence of phosphates10.1021/ac60230a034 ↗
45. Gutzeit · 1953
46. Lambert · 1974
47. Pavlov · 2004
48. Golden · 2004
49. Grobin J · 1969
50. Martens · 1989
51. Partial least-squares regression: a tutorial10.1016/0003-2670(86)80028-9 ↗
52. Harris · 2016
53. Thomas, partial least-squares methods for spectral analyses. application to simulated and glass spectral data10.1021/ac00162a021 ↗
54. Partial least-squares methods for spectral analyses. 1. Relation to other quantitative calibration methods and the extraction of qualitative information10.1021/ac00162a020 ↗
55. Capability of detection of an analytical method evaluating false positive and false negative (ISO 11843) with partial least squares10.1016/S0169-7439(03)00110-2 ↗
56. Miller · 2018
57. Study of accuracy in chemical analysis using linear calibration curves10.1021/ac60125a002 ↗
58. Intra-laboratory testing of method accuracy from recovery assays10.1016/S0039-9140(98)00271-9 ↗
59. Linear and non-linear multivariate calibration methods for multicomponent kinetic determinations in cases of severe non-linearity10.1016/S0003-2670(99)00709-6 ↗
60. Process analytical chemistry in a nickel electroplating bath. Automated sequential injection for additive determination10.1039/c1ay05434a ↗