Structure and tribological properties of MoSx coatings prepared by bipolar DC magnetron sputtering
Source abstract
Abstract
Abstract MoS x coatings were prepared by bipolar pulse DC (balanced and unbalanced) magnetron-sputtering systems. Deposition parameters, cathode current density, argon pressure, bias voltage and magnetron sputtering conditions, were varied in order to obtain low friction and wear-resistant coatings. Composition and surface morphology were determined by energy dispersive X-rays and scanning electron microscopy, while the structure was investigated by X-ray diffraction. The friction and wear properties were investigated by fretting tests in ambient air of x coatings characterised by a strong (002) basal plane orientation parallel to the substrate were obtained in a reproducible way. Such coatings deposited under optimised conditions exhibit very good lubricity and high wear-resistance, even in ambient air with a relative humidity of 50%. Conversely, when deposition parameters such as higher argon pressure and larger cathode current density result in the deposition of a MoS x coatings with a needle-like structure and preferential (100) and (110) plane orientations, a lower wear resistance is achieved especially in air of 50% relative humidity. Ion bombardment, achieved by applying a negative voltage bias or unbalanced sputtering conditions, improves the friction and wear performance. Conversely, a positive bias voltage deteriorates the tribological performance of the coatings. Experimental data on the friction and sliding wear resistance for MoS x coatings indicate that the best tribological properties are obtained with low sulfur and featureless MoS x coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · MXene and MAX Phase Materials · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Spalvins · J. Vac. Sci. Technol. · 1987 · A5 · 21210.1116/1.574106 ↗
2. Roberts · Tribol. Inter. · 1990 · 23 · 4510.1016/0301-679X(90)90042-N ↗
3. Hilton · Surf. Coat. Technol. · 1992 · 54–55 · 43510.1016/S0257-8972(07)80062-4 ↗
4. Rechberger · Surf. Coat. Technol. · 1993 · 60 · 58410.1016/0257-8972(93)90157-J ↗
5. Jervis · J. Mater. Res. · 1991 · 6 · 135010.1557/JMR.1991.1350 ↗
6. Lince · J. Mater. Res. · 1990 · 5 · 21810.1557/JMR.1990.0218 ↗
7. Hilton · Surf. Coat. Technol. · 1994 · 68–69 · 40710.1016/0257-8972(94)90194-5 ↗
8. Stupp · Thin Solid Films · 1984 · 118 · 37510.1016/0040-6090(84)90207-4 ↗
9. Hilton · Surf. Coat. Technol. · 1992 · 53 · 1310.1016/0257-8972(92)90099-V ↗
10. Teer · Surf. Coat. Technol. · 1997 · 94–95 · 57210.1016/S0257-8972(97)00498-2 ↗
11. Simmonds · Thin Solid Films · 1999 · 354 · 5910.1016/S0040-6090(99)00565-9 ↗
12. Weise · Surf. Coat. Technol. · 1995 · 76–77 · 38210.1016/0257-8972(95)02605-3 ↗
13. Bhattacharya · Tribol. Trans. · 1993 · 36 · 62110.1080/10402009308983203 ↗
14. Zhang · Thin Solid Films · 1993 · 229 · 5810.1016/0040-6090(93)90410-Q ↗
15. Wahl · Surf. Coat. Technol. · 1995 · 73 · 15210.1016/0257-8972(94)02383-2 ↗
16. Fox · Surf. Coat. Technol. · 1999 · 112 · 11810.1016/S0257-8972(98)00798-1 ↗
17. Mohrbacher · Tribol. Inter. · 1995 · 28 · 26910.1016/0301-679X(95)00005-O ↗
18. Mohrbacher · Wear · 1995 · 180 · 4310.1016/0043-1648(94)06538-1 ↗
19. Window · J. Vac. Sci. Technol. A · 1986 · 4 · 45310.1116/1.573904 ↗
20. Campbell · Wear · 1994 · 174 · 4710.1016/0043-1648(94)90085-X ↗
21. Seitzman · Surf. Coat. Technol. · 1992 · 52 · 9310.1016/0257-8972(92)90375-K ↗
22. Hirvonen · Surf. Coat. Technol. · 1996 · 80 · 13910.1016/0257-8972(95)02701-7 ↗
23. Fleischauer · Tribol. Trans. · 1990 · 31 · 232