journal article·2016-10

Laser modification of polylactide surface layer prior autocatalytic metallization

Krzysztof Moraczewski, Waldemar Mróz, Bogusław Budner, Rafał Malinowski, Marian Żenkiewicz

Publisher page

Abstract

Abstract The paper presents the results of laser modification as a method of surface layer preparation to autocatalytic metallization of polylactide. Laser modification was performed using an ArF excimer laser with a fluence of 15, 30 or 60 mJ/cm2. The number of 10, 50, 100, 500 and 1000 laser pulses were used. The effects of laser modification on the geometrical structure, surface wettability, surface energy and chemical composition of polylactide surface layer have been studied. Copper plating was conducted to determine the effectiveness of laser modification as a surface preparation method prior autocatalytic metallization. Studies have shown that the best quality of copper layer was obtained for a sample modified with 10 laser pulses with fluence of 15 mJ/cm2. For the remaining samples modified with higher laser fluence or more pulses deposited layers were inferior quality or did not deposit at all.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Electrodeposition and Electroless Coatings · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Electroless nickel, alloy, composite and nano coatings — a critical review10.1016/j.jallcom.2013.03.107 ↗
2. Epoxy polymer surface modification through wet — chemical organic surface synthesis for adhesion improvement in microelectronic10.1016/j.tsf.2005.08.355 ↗
3. Paunovic · 2006
4. Metallization of polymer through a novel surface modification applying a photocatalytic reaction10.1016/j.surfcoat.2006.09.052 ↗
5. Multiple activation of ion track etched polycarbonate for the electroless synthesis of metal nanotubes10.1007/s00339-011-6646-z ↗
6. Palladium (+2) reduction: a key step for the electroless Ni metallization of insulating substrates by a tin-free process10.1016/j.tsf.2006.05.032 ↗
7. Silver localization on polyimide using microcontact printing and electroless metallization10.1016/j.apsusc.2014.04.108 ↗
8. Comparison of some effects of modification of a polylactide surface layer by chemical, plasma, and laser methods10.1016/j.apsusc.2015.03.202 ↗
9. Comparison of KrF and ArF excimer laser treatment of biopolymer surface10.1016/j.apsusc.2015.02.137 ↗
10. Laser application of polymers
11. Bäuerle · 2013
12. Smart component for switching of plasmon resonance by external electric field10.1021/acsami.5b08334 ↗
13. Tuning the plasmonic behavior of metallic nanowires10.1016/j.matlet.2015.12.009 ↗
14. Regular pattern formation on surface of aromatic polymers and its cytocompatibility10.1016/j.apsusc.2016.02.160 ↗
15. Fs- and ns-laser processing of polydimethylsiloxane (PDMS) elastomer: comparative study10.1016/j.apsusc.2014.12.121 ↗
16. Fs-laser processing of medical grade polydimethylsiloxane (PDMS)10.1016/j.apsusc.2015.11.175 ↗
17. Optical properties of polydimethylsiloxane (PDMS) during nanosecond laser processing10.1016/j.apsusc.2015.10.016 ↗
18. A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS)10.1016/j.apsusc.2015.12.173 ↗
19. Studies of KrF laser-induced long periodic structures on polyimide10.1016/j.optlaseng.2008.06.015 ↗
20. Poly(lactid acid)
21. Capability of biopolymers in electronics manufacturing
22. Influence of DC plasma modification on the selected properties and the geometrical surface structure of polylactide prior to autocatalytic metallization10.1016/j.matchemphys.2014.12.045 ↗
23. Autocatalytic metallization of polylactide10.14314/polimery.2015.492 ↗
24. Surface ablation of PLLA induced by KrF excimer laser10.1016/j.apsusc.2013.06.127 ↗
25. Controlled biopolymer roughness induced by plasma and excimer laser treatment10.3144/expresspolymlett.2013.92 ↗
26. Laser induced surface modification of polylactide10.1016/j.jmatprotec.2012.03.019 ↗
27. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
28. Ablation and water etching of plasmatreated polymers10.1080/10420150801969654 ↗
29. Creating a catalytically active phase on dielectric surfaces prior to electroless copper plating10.1023/A:1016729020537 ↗
30. Selective silver seeding on laser modified polyimide for electroless copper plating10.1016/j.apsusc.2004.11.005 ↗
31. Ni direct electroless metallization of polymers by a new palladium — free process10.1016/j.surfcoat.2005.05.006 ↗
32. Polypropylene surface modification model in atmospheric pressure dielectric barrier discharge10.1016/j.surfcoat.2006.07.205 ↗
33. Gilbertson · 1991
34. Practical aspects of determining the intensity of corona treatment
35. Mallory · 2002