journal article·2018-09

Photo activated performance of titanium oxide coatings deposited by reactive gas impulse magnetron sputtering

W. Pawlak, M. Jakubowska, A. Sobczyk-Guzenda, M. Makówka, H. Szymanowski, B. Wendler, M. Gazicki-Lipman

Publisher page

Abstract

Abstract A novel reactive gas impulse magnetron sputtering (GIMS) technique was applied in order to deposit titanium dioxide coatings. A small volume magnetron sputtering reactor was used for that purpose, wherein titanium target was reactively sputtered under a pure oxygen atmosphere. The process resulted in a high quality nearly stoichiometric and fairly crystalline TiO2 films with a prevailing content of rutile. The coatings exhibit a strong photowetting effect – it takes 25 min of illumination with UV-C radiation to arrive at their “superhydrophilic” behaviour. In addition, in the discussed process of reactive GIMS deposition of titanium dioxide films, no target poisoning effect has been observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electronic and Structural Properties of Oxides · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
2. Photocatalytic bactericidal activity of TiO2 in aqueous suspensions of E. coli10.2166/wst.1997.0716 ↗
3. Shape-dependent bactericidal activity of TiO2 for the killing of Gramm-negative bacteria Agrobacterium tumefaciens under UV torch irradiation10.1007/s11356-013-1717-7 ↗
4. Plasma enhanced CVD deposition of titanium oxide for biomedical applications10.1016/j.surfcoat.2005.01.092 ↗
5. Photo-induced properties of thin TiO2 films deposited using the radio frequency plasma enhanced chemical vapor deposition method10.1016/j.tsf.2006.12.183 ↗
6. Photocatalytic water treatment by titanium dioxide: recent updates10.3390/catal2040572 ↗
7. Kinetics and mechanism of TNT degradation in TiO2 photocatalysis10.1016/j.chemosphere.2004.05.008 ↗
8. Photocatalytic degradation of high ammonia concentration wastewater by TiO210.1186/s40984-015-0012-9 ↗
9. Novel TiO2 CVD films for semiconductor photocatalysis10.1016/S1010-6030(02)00190-9 ↗
10. Hydrophilicity of amorphous TiO2 ultra-thin films10.1016/S0039-6028(03)00397-2 ↗
11. Evaluation of photocatalytic properties of titanium oxide films prepared by plasma enhanced chemical vapor deposition10.1016/j.tsf.2005.05.007 ↗
12. Light-induced amphi-philic surfaces10.1038/41233 ↗
13. TiO2 photocatalysis: design and applications10.1016/j.jphotochemrev.2012.06.001 ↗
14. Comparison of self-cleaning properties of three titania coatings on float glass10.1016/j.apsusc.2011.09.048 ↗
15. Photocatalytic activity of TiO2 films grown on different substrates10.1016/S0045-6535(00)00360-X ↗
16. Thick titanium dioxide films for semiconductor photocatalysis10.1016/S1010-6030(03)00206-5 ↗
17. Photoefficiency and optical, microstructural, and structural properties of TiO2 thin films usad as photoanodes10.1021/la034998y ↗
18. Photocatalytic activity of thin TiO2 films deposited using sol-gel and plasma enhanced chemical vapor deposition methods10.1016/j.ceramint.2012.09.046 ↗
19. Mechanical, photocatalytic and microbiological properties of titanium dioxide thin films synthesized with the sol-gel and low temperature plasma deposition techniques10.1016/j.materresbull.2013.06.024 ↗
20. Dielectric properties of TiO2-films reactively sputtered from Ti in an RF magnetron10.1016/S0042-207X(96)00196-0 ↗
21. Microstructure of titanium oxide films investigated by atomic force microscopy and transmission electron microscopy10.1016/S0168-583X(98)00211-0 ↗
22. Photocatalytic degradation of phenol by TiO2 thin films prepared by sputtering10.1016/S0926-3373(99)00123-X ↗
23. Thin films of photocatalyic TiO2 and ZnO deposited inside a tubing by spray pyrolysis10.1016/S0040-6090(02)00786-1 ↗
24. Photocatalytic properties of titania powders prepared by hydrothermal method10.1016/j.apcatb.2004.06.006 ↗
25. Politechnika Lodzka (Lodz, Poland), Process for producing a pulse of high-density plasma intended for coatings in magnetron sputtering process, Patent no. PL 399606, 2013.
26. Gas injection as a tool for plasma process control during coating deposition10.1016/j.surfcoat.2012.05.101 ↗
27. Characterization of microstructural, mechanical and optical properties of TiO2 layers deposited by GIMS and PMS methods10.1016/j.surfcoat.2015.10.004 ↗
28. Novel GIMS technique for deposition of colored Ti/TiO2 coatings on industrial scale10.1515/msp-2016-0024 ↗
29. The effect of thermal annealing on Fe/TiO2 coatings deposited with the help of RF PECVD metod. Part 1. Chemical and phase composition10.1016/j.ceramint.2016.11.105 ↗
30. Evolution of structural and optical properties of rutile TiO2 thin films synthesized at room temperature by chemical bath deposition method10.1016/j.jpcs.2013.09.008 ↗
31. TiO2 photocatalysis: a historical overview and future prospects10.1143/JJAP.44.8269 ↗
32. Plasma enhanced aerosol–gel method: a new way of preparing ceramic coatings10.1007/s10971-013-2986-9 ↗
33. Bagheri · 2013
34. Physical characterization of TiOx layers deposited from sol-gel technique
35. Effect of peak power in reactive high power impulse magnetron sputtering of titanium dioxide10.1016/j.surfcoat.2011.04.071 ↗
36. Growth of nanocrystalline TiO2 thin films and crystal anisotropy of anatase phase deposited by direct current reactive magnetron sputtering10.1016/j.matchemphys.2013.03.002 ↗
37. Film characterization of titanium oxide films prepared by high-power impulse magnetron sputtering10.1016/j.surfcoat.2011.04.046 ↗
38. Rutile TiO2 thin films grown by reactive high power impulse magnetron sputtering10.1016/j.tsf.2013.07.058 ↗
39. Structure and properties of crystalline titanium oxide layers deposited by reactive pulse magnetron sputtering10.1016/j.surfcoat.2003.10.115 ↗
40. Magnetron sputtered TiO2 films on a stainless steel substrate: selective rutile phase formation and its tribological and anti-corrosion performance10.1016/j.tsf.2011.01.042 ↗
41. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
42. Photocatalytic TiO2 and doped TiO2 coatings to improve the hygiene of surfaces used in food and beverage processing—a study of the physical and chemical resistance of the coatings10.3390/coatings4030433 ↗
43. W. Pawlak, M. Makówka, H. Szymanowski, M. Gazicki-Lipman, B. Wendler, in preparation.