journal article·2021-07

Tuning Ta coating properties through chemical and plasma etching pre-treatment of NiTi wire substrates

Ben Pace, Avi Bendavid, Mohammed Ahsan, Matthew Dargusch, Vijay Bhatia, Jacob Byrnes, Julie Cairney

Publisher page

Abstract

Tantalum coatings have wide applications including as corrosion resistant coatings and radiopaque films for biomedical implants. However, producing coatings of sufficient thickness with the desired mechanical properties remains a substantial challenge. In this study, we show that the microstructure and properties of thick Ta films deposited on NiTi wires can be controlled significantly by pre-treating the substrate surface via ultrasonication followed by Aqua Regia etchant, or by plasma-based etching alone, while maintaining overall adhesive strength. Films from plasma and chemically etched samples exhibited substantially greater bulk texturing in the <111> direction than the control film, also yielding more elongated and columnar grains. The extent of <111> texturing in each sample was reflected in differences in Σ3 CSL boundary density. Additionally, only plasma etching yielded a β-Ta secondary phase. These microstructural observations demonstrate that film phase composition, texturing, grain shape distribution and grain boundary characteristics can be optimised for particular applications, simply by applying different NiTi substrate pretreatment regimes. It is suggested that this bears significant implications for influencing bulk properties such as cohesive and shear strength, as well as ductility, conductivity and cohesion in thick tantalum coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Preparation and properties of tantalum thin films10.1016/0040-6090(72)90365-3 ↗
2. Tantalum thin film applications–a new approach for capacitors10.1155/APEC.4.69 ↗
3. Electrochemical corrosion behavior of nanocrystalline β-ta coating for biomedical applications10.1021/acsbiomaterials.5b00552 ↗
4. Electrochemical and microstructural studies of tantalum and its oxide films for biomedical applications in endovascular surgery10.1023/A:1014779008598 ↗
5. Corrosion resistance and cytocompatibility of tantalum-surface-functionalized biomedical ZK60 Mg alloy10.1016/j.corsci.2016.10.021 ↗
6. R.B. Kaplan, in: Open cell tantalum structures for cancellous bone implants and cell and tissue receptors, Google Patents, 1994.
7. Nitinol medical devices and implants10.3109/13645700009063054 ↗
8. Physicochemical and biological aspects of Nitinol as a biomaterial10.1179/095066001771048745 ↗
9. The evolution of cardiovascular stent materials and surfaces in response to clinical drivers: a review10.1016/j.actbio.2008.11.012 ↗
10. Schewe · 2016 · 115
11. Corrosion behavior and surface characterization of tantalum implanted TiNi alloy10.1016/j.surfcoat.2007.11.003 ↗
12. Properties of thin films of tantalum oxide deposited by ion-assisted deposition10.1016/0040-6090(94)90848-6 ↗
13. Surface characterization and immersion tests of TiNi alloy coated with Ta10.1016/j.surfcoat.2004.03.051 ↗
14. X-ray analyses of thermally grown and reactively sputtered tantalum oxide films on NiTi alloy, Nuclear Instruments and Methods in Physics Research Section B
15. Tantalum coated NiTi alloy by PIIID for biomedical application10.1016/j.surfcoat.2012.11.002 ↗
16. Surface chemistry and cytotoxicity of reactively sputtered tantalum oxide films on NiTi plates10.1016/j.tsf.2015.04.070 ↗
17. A new structure in tantalum thin films10.1063/1.1754294 ↗
18. The structure and stability of β-Ta thin films10.1016/j.tsf.2004.12.006 ↗
19. X-ray analysis of the structure-phase states of the tantalum coating on NiTi substrate treated by electron beams
20. E.O. Nasakina, M.A. Sevostyanov, A.B. Mikhaylova, A.S. Baikin, K.V. Sergienko, A.V. Leonov, A.G. Kolmakov, Formation of alpha and beta tantalum at the variation of magnetron sputtering conditions, IOP Conference Series: Materials Science and Engineering, 110 (2016) 012042.10.1088/1757-899X/110/1/012042 ↗
21. X-ray analysis of sputtered films of beta-tantalum and body-centered cubic tantalum10.1016/0040-6090(72)90277-5 ↗
22. An X-ray study of β-tantalum10.1107/S0021889873008502 ↗
23. Shock-induced deformation twinning and omega transformation in tantalum and tantalum–tungsten alloys10.1016/S1359-6454(00)00287-1 ↗
24. Observations of fcc and hcp tantalum10.1007/s10853-015-8931-2 ↗
25. FCC tantalum thin films deposited by magnetron sputtering10.1016/j.surfcoat.2018.12.015 ↗
26. Ducheyne · 2015
27. J.A. Thornton, in: Structure-zone models of thin films, 31st Annual Technical Symposium on Optical and Optoelectronic Applied Sciences and Engineering, SPIE, 1988, pp. 11.10.1117/12.941846 ↗
28. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
29. A structure zone diagram including plasma-based deposition and ion etching10.1016/j.tsf.2009.10.145 ↗
30. Radiopaque coating for biomedical devices
31. Glocker · 2016
32. Maeng · 2004
33. Mechanically stable tantalum coating on a nano-roughened NiTi stent for enhanced radiopacity and biocompatibility10.1016/j.surfcoat.2016.08.014 ↗
34. H.E. Swanson, E. Tatge, Standard X-Ray Diffraction Powder Patterns, U. S. Dept. of Commerce, National Bureau of Standards, Washington, 1953.
35. Texture development in polycrystalline thin films10.1016/0921-5107(95)03011-5 ↗
36. Texture control in thin films using ion bombardment
37. Role of process parameters in the texture evolution of TiN films deposited by hollow cathode discharge ion plating10.1016/S0257-8972(01)01201-4 ↗
38. Texture and grain boundary character distribution (GBCD) in rapidly solidified and annealed Fe–6·5 mass% Si ribbons10.1080/09500838908214776 ↗
39. Modelling of CSL boundaries distribution in polycrystals10.1016/0036-9748(89)90061-6 ↗
40. On the grain boundary statistics in metals and alloys susceptible to annealing twinning10.1016/0956-7151(94)90004-3 ↗
41. Texture influence on the frequency of occurrence of CSL-boundaries in polycrystalline materials10.1016/0956-7151(93)90097-C ↗