Formation of anatase and srilankite mixture as a result of the thermally induced transformation of the a-C:H:TiOx coating
Source abstract
Abstract
Abstract The a-C:H:TiOx coating deposited by radio-frequency plasma-enhanced chemical vapor deposition (RF PECVD) method, using methane and titanium (IV) isopropoxide mixture atmosphere, was post-deposition annealed at 400 °C in the atmosphere of air. Phase composition and coating structure were studied in detail by Raman spectroscopy, X-ray diffraction and transmission electron microscopy. Depending on the duration of the annealing process, two stages of transformation were identified. In the first stage, during the first 30 min of annealing, processes related to the degradation of a carbon matrix occurred. Characteristic bands attributed to carbon coatings disappeared in Raman spectra and hardness decreased from 10 GPa measured for the as-deposited coating to 2.7 GPa. In the second stage, after additional 10 min of annealing, the coating transformed into a crystalline TiO2 in which two polymorphs (anatase and srilankite) coexisted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A critical review of diamond like carbon coating for wear resistance applications10.1016/j.ijrmhm.2018.09.006 ↗
2. Biomedical applications of diamond-like carbon coatings: a review
3. The thermal stability of diamond-like carbon10.1016/0925-9635(94)00243-6 ↗
4. Evaluation of thermal degradation of DLC film using a novel Raman spectroscopy technique
5. The friction and wear properties of metal-doped DLC films under current-carrying condition
6. Structure, mechanical and tribological properties of Me-doped diamond-like carbon (DLC) (Me = Al, Ti, or Nb) hydrogenated amorphous carbon coatings10.3390/coatings8100370 ↗
7. Nanotribology of silver and silicon doped carbon coatings10.1016/j.diamond.2015.12.010 ↗
8. Doping and alloying effects on DLC coatings10.1007/978-0-387-49891-1_12 ↗
9. Developments in photocatalytic antibacterial activity of nano TiO2: a review10.1007/s11814-016-0118-2 ↗
10. Photocatalytical and antibacterial activity of TiO2 nanoparticles obtained by laser ablation in water10.1016/j.apcatb.2014.10.031 ↗
11. Photocatalytic antibacterial activity of nano-TiO2 (anatase)-based thin films: effects on Escherichia coli cells and fatty acids10.1016/j.jphotobiol.2014.12.010 ↗
12. Review on: titanium dioxide applications10.1016/j.egypro.2018.11.159 ↗
13. Riesite, a new high pressure polymorph of TiO2 from the Ries impact structure10.3390/min10010078 ↗
14. Atomic layer deposition of rutile and TiO2-II from TiCl4 and O3 on sapphire: influence of substrate orientation on thin film structure10.1016/j.jcrysgro.2015.07.029 ↗
15. Polymorphic transformation and powder characteristics of TiO2 during high energy milling10.1023/A:1026751017284 ↗
16. Characteristic of mechanically milled TiO2 powders10.1016/S0167-577X(01)00518-3 ↗
17. TiO2-II. Ambient pressure preparation and structure refinement10.1016/0025-5408(88)90040-2 ↗
18. Laser ablation condensation of α-PbO2-type TiO210.1103/PhysRevLett.89.096106 ↗
19. Titanium (IV) isopropoxide as a source of titanium and oxygen atoms in carbon based coatings deposited by Radio Frequency Plasma Enhanced Chemical Vapour Deposition method10.1016/j.tsf.2019.137697 ↗
20. X-ray line broadening in metals10.1088/0370-1298/62/11/110 ↗
21. X-ray diffraction analysis by Williamson-Hall, Halder-Wagner and size-strain plot methods of CdSe nanoparticles- a comparative study10.1016/j.matchemphys.2019.122021 ↗
22. An improved technique for determining hardness and elasticmodulus using load and displacement sensing indentation experiments10.1557/JMR.1992.0613 ↗
23. Use of Raman scattering to investigate disorder and crystallite formation in as-deposited and annealed carbon films10.1103/PhysRevB.29.3482 ↗
24. Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique10.1016/j.apsusc.2012.01.072 ↗
25. Structure and characterization of the multilayered Ti-DLC films by FCVA10.1016/j.diamond.2010.02.014 ↗
26. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
27. Spectral decomposition of Raman spectra of mixed-phase TiO2 thin films on Si and silicate substrates10.1002/jrs.5369 ↗
28. Properties of TiO2 thin films deposited by rf reactive magnetron sputtering on biased substrates10.1016/j.apsusc.2016.08.125 ↗
29. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
30. Raman study of single crystal anatase TiO2 up to 70 GPa10.1016/0038-1098(95)00129-8 ↗
31. Polymorphic behavior of titania under dynamic loading10.1063/1.1670796 ↗
32. The structural transformation of anatase TiO2 by high-energy vibrational ball milling10.1557/JMR.1999.0112 ↗
33. Morphology and structure of TiO2 thin films grown by atomic layer deposition10.1016/0022-0248(94)00874-4 ↗
34. Tribological and corrosive investigations of perfluoro and alkylphosphonic self-assembled monolayers on Ti incorporated carbon coatings10.1016/j.triboint.2018.10.010 ↗
35. Preparation of high quality nitrogen doped TiO2 thin films as a photocatalyst using a pulsed laser deposition method10.1016/j.tsf.2003.11.185 ↗