Evaluation of the distribution of the strength properties in AlCrSiN gradient coating by a micro slurry-jet erosion (MSE) method
Source abstract
Abstract
Abstract Several experimental techniques are ordinarily used to evaluate the strength properties of metal nitride coatings used for cutting tools and molds. However, for gradient coatings, in which the chemical composition changes gradually in the normal direction of depth relative to the surface, the properties at different depth positions of the gradient layer are difficult to evaluate. In this study, our previously developed micro slurry-jet erosion (MSE) test was applied to swiftly evaluate the strength properties of AlCrSiN gradient coating. The specimens of AlCrSiN gradient coating and also with AlCrSiN single layer coatings of different (Al + Si) concentration were deposited on high speed steel by a cathodic arc method. The AlCrSiN gradient coating had (Al + Si) concentration continuously increasing towards the surface. The MSE tests were conducted by impacting the slurry-jet containing 1.2 μm sized alumina particles perpendicular to the coated surface, and the depth profiles of the eroded surfaces were measured and the erosion rate was obtained. For the AlCrSiN single layer coatings, the erosion depth curves changed linearly, and their erosion rates became remarkably larger with increasing (Al + Si) concentration although the hardness decreased gradually. Moreover, for the AlCrSiN gradient coating, the erosion depth curve was approximated by a cubic B-spline curve because the erosion rate changed gradually in the depth direction. From the characterization by transmission electron microscopy and selected area diffraction, the change of the erosion rate was caused by forming nano-composites and also by segregation of a hexagonal closed-packed phase (hcp). It was found that the MSE method is an easy to apply and useful technique to evaluate the distribution of the properties of hard gradient coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
2. Synthesis of pseudobinary Cr-Al-N films with B1 structure by re-assisted magnetron sputtering method10.1016/S0257-8972(97)00391-5 ↗
3. The formation and role of interfaces in superhard nc-MenN/a-Si3N4 nanocomposites10.1016/j.surfcoat.2006.08.112 ↗
4. Development of novel coation technology by vacuum arc with rotation cathodes for industrial production of nc-(Al1-xTix)N/a-Si3N4 superhard nanocomposite coatings for dry, hard machining10.1007/s11090-004-7929-3 ↗
5. Structure and properties of Al–Ti–Si–N coatings prepared by the cathodic arc ion plating method for high speed cutting applications10.1016/S0257-8972(01)01391-3 ↗
6. New development in superhard coatings: the superhard nanocrystalline-amorphous composites10.1016/S0040-6090(97)00665-2 ↗
7. Investigation of the properties of Al1-xCrxN coatings prepared by cathodic arc evaporation10.1016/j.surfcoat.2005.01.043 ↗
8. High temperature properties of CrAlN, CrAlSiN and AlCrSiN coatings — Structure and oxidation10.1016/j.matchemphys.2011.03.078 ↗
9. Influence of Al and Si content on structure and mechanical properties of arc evaporated Al–Cr–Si–N thin films10.1016/j.tsf.2013.03.017 ↗
10. Structure–property relations of arc-evaporated Al–Cr–Si–N coatings10.1016/j.surfcoat.2007.12.041 ↗
11. Microstructure, mechanical properties, and tribological behaviors of Cr–Al–N, Cr–Si–N, and Cr–Al–Si–N coating by a hybrid coating system10.1016/j.surfcoat.2006.07.118 ↗
12. Evaluation of wear resistance of thin hard coatings by a new solid particle impact test10.1016/S0043-1648(01)00743-8 ↗
13. Micro-slurry-jet erosion (MSE) testing of CVD TiC/TiN and TiC coatings10.1016/j.wear.2009.02.014 ↗
14. New evaluation method for the properties of composite hard coatings
15. The industrial development of AIP system technologies
16. Formation of cubic structured (Al1-xCrx)2+δO3 and its dynamic transition to corundum phase during cathodic arc evaporation10.1016/j.surfcoat.2012.10.062 ↗
17. Plasma assisted PVD: the past and present
18. Structural and mechanical property of Si incorporated (Ti,Cr,Al)N coatings deposited by arc ion plating process10.1016/j.surfcoat.2005.08.025 ↗
19. Microstructures of (Ti,Cr,Al,Si)N films synthesized by cathodic arc method10.1016/j.surfcoat.2006.07.016 ↗
20. Characterization of quaternary (Cr,Al)N-based films synthesized by the cathodic arc method10.1016/j.surfcoat.2007.05.050 ↗
21. Alavudeen · 2006 · 13
22. The role of hcp-AlN on hardness behavior of Ti1-xAlxN nanocomposite during annealing10.1016/j.tsf.2004.08.147 ↗
23. Wear of TiN Coating by Micro Slurry-jet Erosion