The initiation of roll coating buildup during thermomechanical processing of aluminum-magnesium alloys
Source abstract
Abstract
Abstract The roll coating developed on an AISI 440C steel work roll during the laboratory hot rolling of an Al-Mg alloy was examined and its microstructure and composition were characterized. The AISI 440C steel work roll had a surface roughness (R a ) of 0.02 μm and the hot rolling schedule involved 20 passes under lubricated conditions. Initial examination of the roll coating generated on the work roll surface revealed it was patchy, discontinuous, streaked in the rolling direction and composed mainly of aluminum, magnesium, oxygen and carbon. Further analysis revealed that the roll coating possessed a complex layered microstructure. Under these rolling conditions, the roll coating microstructure comprised of an amorphous magnesium-rich oxide layer lying on an amorphous mixture of aluminum, magnesium, carbon and oxygen with amorphous iron and chromium-rich oxide particles embedded within it. Damage to the work roll surface and work roll debris observed within the roll coating highlighted that the work roll surface was involved in the roll coating formation. Analysis of the roll coating suggested that the initial roll coating composition and microstructure were influenced by the work roll and work piece material composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Mechanisms of aluminum pickup in deformation
2. Influence from tool roughness on the risk of work material adhesion and transfer10.1080/10426910902941744 ↗
3. Adhesion of AA5182 aluminum sheet to DLC and TiN coatings at 25°C and 420°C10.1016/j.surfcoat.2007.07.085 ↗
4. Surface analytical studies of hot rolled aluminum
5. Formation and structure of a subsurface layer in hot rolled aluminium alloy AA3104 transfer bar10.1016/j.triboint.2005.07.021 ↗
6. Prediction of effect of rolling speed on coefficient of friction in hot sheet rolling of steel using sliding rolling tribo-simulator10.1016/j.jmatprotec.2009.08.005 ↗
7. Studies on hot rolling oils for aluminum: evaluation of aluminum roll coating
8. The influence of rolling oils on roll-coating Builup during hot rolling of aluminium
9. The mechanism of roll coating buildup during hot rolling of aluminum10.1080/05698197808982878 ↗
10. The relationship between lubricant composition and roll-coating formation during the hot-rolling of aluminum
11. Studies on hot rolling oils for aluminum: influence of oil composition and emulsion properties on the roll coating buildup
12. Influence of oil composition and emulsion properties on the roll coating buildup during hot rolling of aluminum
13. The effect of strip surface finish on formation of roll coatings during hot rolling of aluminum
14. The interfacial transfer of aluminum to steels and ceramic materials under loaded contact at high temperatures II: both surfaces at high temperatures
15. A study of wear mechanisms in the cold rolling of aluminium strip10.1016/0924-0136(92)90024-M ↗
16. The reactions of oxidised aluminium surfaces with lubricant additives and related compounds10.1016/0169-4332(91)90120-9 ↗
17. Tribological behaviour of hot rolling rolls10.1016/j.wear.2004.12.006 ↗
18. Mang · 2007
19. Experimental study of the disturbed layer generation during hot rolling contact of aluminum with steel10.1016/j.triboint.2012.05.004 ↗
20. The tribological behavior of PVD coated work roll surfaces during rolling of aluminum10.1016/j.surfcoat.2014.06.071 ↗
21. Hot rolling of sheet and strip: aluminium and aluminium alloys10.1179/030716975803277582 ↗
22. Tribology of plane strain compression tests on aluminum strip using ToF-SIMS analysis of transfer films10.1016/S0043-1648(02)00295-8 ↗
23. Correlation of microstructure and thermal fatigue property of three work rolls10.1007/s11661-997-0017-6 ↗
24. Wear mechanisms experienced by a work roll grade high speed steel under different environmental conditions10.1016/j.wear.2009.01.048 ↗
25. Studies on hot rolling oils for aluminum_influence of oil composition and emulsion properties on the rolling lubricity.Pdf
26. Tribology of hot metal forming10.1016/S0301-679X(98)00009-7 ↗
27. Non-ferrous hot rolling lubrication: the next generation
28. Schubert
29. Surface generation and boundary lubrication in bulk forming of aluminium alloy10.1016/j.wear.2004.10.011 ↗
30. Effect of additives on friction during plane strain compression of aluminium strip10.1016/j.wear.2004.07.001 ↗