Anodic plasma electrolytic deposition of composite coating on ferrous alloys with low thermal conductivity and high adhesion strength
Source abstract
Abstract
This work reports the preparation of ceramic coatings as potential thermal barrier coatings (TBC) on ferrous alloys, targeting automotive applications. The coatings are shown to have excellent adhesion due to fabrication by plasma electrolytic aluminating (PEA), an anodic plasma electrolytic deposition process. The PEA process was conducted in an aluminate-containing aqueous electrolyte under a high voltage. The coating has superior adhesion (>60 MPa) and low thermal conductivity (~0.5 W/mK) measured by the adhesive tensile test and steady-state heat flow methods, respectively. Scanning electron microscope (SEM) observations reveal that the coatings have numerous mesopores. X-ray diffraction (XRD) analysis shows that the coating mainly consists of α-Al2O3 and hercynite (FeAl2O4) with (ultra-)fine grain size. Amorphous phases are also identified in the coatings. These mesopores, fine grain size and amorphous phases contributed to the low thermal conductivity of the coating. The hercynite phase indicated that the substrate was involved in the PEA reaction and thus the coating had a metallurgical bonding to the substrate. After cyclic thermal shock tests (quenching from 425 °C to 20 °C in water 100 times), the coating retained its porous structure without spallation. The results demonstrate that the ceramic composite coating may be a good candidate for thermal management of automotive engines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Failure mechanisms of thermal barrier coatings exposed to elevated temperatures10.1016/0040-6090(82)90019-0 ↗
3. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
4. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
5. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: a review10.1007/s11666-007-9148-y ↗
6. Effects of thermal barrier coating on a turbocharged diesel engine performance10.1016/S0257-8972(99)00099-7 ↗
7. Thermal fatigue analysis of automotive diesel piston: experimental procedure and numerical protocol10.1016/j.ijfatigue.2014.11.011 ↗
8. Fatigue on engine pistons – a compendium of case studies10.1016/j.engfailanal.2004.12.023 ↗
9. Finite element analysis of stress distribution in thermal barrier coatings10.1016/j.surfcoat.2008.06.178 ↗
10. Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects10.1016/j.surfcoat.2012.02.019 ↗
11. Concept of “temperature swing heat insulation” in combustion chamber walls, and appropriate thermo- physical properties for heat insulation coat10.4271/2013-01-0274 ↗
12. Reduction of heat loss and improvement of thermal efficiency by application of “temperature swing” insulation to direct-injection diesel engines10.4271/2016-01-0661 ↗
13. Experimental investigation of the relationship between thermal barrier coating structured porosity and homogeneous charge compression ignition engine combustion
14. Study of the transient operation of low heat rejection turbocharged diesel engine including wall temperature oscillations10.4271/2007-01-1091 ↗
15. Numerical and experimental investigation of a piston thermal barrier coating for an automotive diesel engine application10.1016/j.applthermaleng.2019.114233 ↗
16. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
17. Thermo-physical properties of plasma electrolytic oxide coatings on aluminium10.1016/j.surfcoat.2004.09.037 ↗
18. The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium10.1016/j.surfcoat.2004.11.045 ↗
19. Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications10.1016/j.surfcoat.2006.06.050 ↗
20. Effects of electrolytic jet plasma oxidation (EJPO) coatings on thermal behavior of engine cylinders10.1007/s00231-019-02600-6 ↗
21. Numerical analysis of thermal distributions in aluminum engine cylinders influenced by alumina ceramic coatings10.1080/10407782.2012.703095 ↗
22. A new eco-friendly anticorrosion strategy for ferrous metals: plasma electrolytic aluminating10.1021/acssuschemeng.8b06839 ↗
23. Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis10.1016/S0257-8972(01)01453-0 ↗
24. General procedure for evaluating amorphous scattering and crystallinity from X-ray diffraction scans of semicrystalline polymers10.1016/0032-3861(90)90243-R ↗
25. X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
26. On the estimation of average crystallite size of zeolites from the Scherrer equation: a critical evaluation of its application to zeolites with one-dimensional pore systems10.1016/j.micromeso.2008.06.010 ↗
27. Size–strain study of NiO nanoparticles by X-ray powder diffraction line broadening10.1016/j.matlet.2011.12.046 ↗
28. Analysis of thermal temperature fields and thermal stress under steady temperature field of diesel engine piston10.1016/j.applthermaleng.2016.11.070 ↗
29. Thermal barrier coatings — technology for diesel engines10.4271/880437 ↗
30. Pore-size dependence of the thermal conductivity of porous silicon: a phonon hydrodynamic approach10.1063/1.3462936 ↗
31. Effect of particle size and amorphous phase on the electrochromic properties of kinetically deposited WO3 films10.1016/j.solmat.2017.06.010 ↗
32. Analytical/finite-element modeling and experimental verification of spray-cooling process in steel10.1007/s11661-998-0364-y ↗
33. Influences of the graphite growth direction on the thermal conductivity of cast iron10.1007/s11661-006-9016-2 ↗
34. Temperature-dependent thermal conductivity of porous silicon10.1088/0022-3727/30/21/001 ↗
35. Influence of coating morphology on adhesive bonding of titanium pre-treated by plasma electrolytic oxidation10.1016/j.surfcoat.2016.01.042 ↗
36. Effect of plasma electrolytic oxidation on joining of AA 5052 aluminium alloy to polypropylene using friction stir spot welding10.1016/j.surfcoat.2017.01.084 ↗
37. Wear mechanism evolution on brake discs for reduced wear and particulate emissions