Interface characterization of combination hard/solid lubricant coatings by specific methods
Source abstract
Abstract
Abstract Double or combination coatings and multilayered coatings were recently developed as a new generation of protective PVD coating for cutting tools. Some of these have already been applied in selected cases in modern machining techniques such as dry high-speed milling, turning, tapping and drilling, or when using a minimum quantity of lubricant (MQL). In this work we studied details of the combination of two coatings, one a solid lubricant (WC/C) coating sputtered onto a hard, wear- and temperature-resistant (TiAlN) coating, deposited onto high-speed steel and cemented carbide substrates. Using specific analytical methods, we focused our investigation on interface (interlayer) characterization between individual layers and the substrate. A detailed knowledge of the interlayer properties is the basis for understanding and interpretation of the macroscopic properties of WC/C–TiAlN combination coatings in a given tribological system. Depth profiles of Vickers microhardness, as determined on low-angle cross-sections of test samples, showed that the TiAlN layer had approximately 3000 HV 0.05, the W-rich interlayer approximately 2500 HV 0.05 and the WC/C solid lubricant approximately 1000 HV 0.05. High adhesion strength was proved by the REVETEST scratch test and by additional SEM+EDS analyses and depth profiles of the scratch tracks. Total delamination L c was observed at critical loads from 80 to 115 N. A low scratching coefficient μ* (0.05–0.20) was typical of thin (3 μm) and also of thick (10.8 μm) coatings. The width of the WC/C–TiAlN interlayer (0.15–0.20 μm) was measured from the SEM image of the kalotest ball crater and from fracture cross-sections. This narrow transient area was also detected and analysed by AES depth profile analysis and by EDS linescan and SEM microanalysis at low-angle cross-sections of the coated samples. All the results were correlated successfully with the declared basic macroscopic properties of the WC/C–TiAlN combination layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Cselle · Surf. Coat. Tehnol. · 1995 · 76–77 · 71210.1016/0257-8972(96)80011-9 ↗
2. Van Stappen · Surf. Coat. Technol. · 1995 · 74–75 · 62910.1016/0257-8972(95)08296-4 ↗
3. Tönshoff · Surf. Coat. Technol. · 1997 · 94–95 · 60310.1016/S0257-8972(97)00504-5 ↗
4. F. Klocke, G. Eisenblätter, Ann. CIRP 46/2 (1997).10.1016/S0007-8506(07)60877-4 ↗
5. T. Cselle, Manufacturing Engineering, SME, Dearbron, MI, 1995.
6. Proceedings of the International Diamond Conferences, Elsevier, 1989–1998.
7. Rechberger · Surf. Coat. Technol. · 1993 · 62 · 39310.1016/0257-8972(93)90273-Q ↗
8. Singer · Wear · 1996 · 195 · 710.1016/0043-1648(95)06661-6 ↗
9. M. Berger, Schweizer Maschinenmarkt, Goldach, Nr. 20 (1991).10.1007/BF00160732 ↗
10. Berger · EUROME 3, · 1997 · 4 · 13
11. Teer · Surf. Coat. Technol. · 1997 · 94–95 · 57210.1016/S0257-8972(97)00498-2 ↗
12. Fox · Surf. Coat. Technol. · 2000 · 125 · 34710.1016/S0257-8972(99)00611-8 ↗
13. Simmonds · Surf. Coat. Technol. · 1998 · 108–109 · 34010.1016/S0257-8972(98)00567-2 ↗
14. Derflinger · Surf. Coat. Technol. · 1999 · 113 · 28610.1016/S0257-8972(99)00004-3 ↗
15. V. Derflinger, H. Zimmermann, M. Grischke, D.T. Quinto, Presented at the ICMCTF San Diego, April 2000 (not published).
16. BALINIT® HARDLUBE, Balzers AG, Surface Technology, Liechtenstein Z 112 D (9905), 1999.
17. REVETEST® scratch testing equipment, C.S.E.M., Neuchâtel, Switzerland, 1997.
18. S. Schäfer, CSEM Instruments Application Bulletin, Neuchâtel, Switzerland, 5 October, 1997.
19. T.E. Furtak (Ed.), Surface Enhanced Raman Spectroscopy, Plenum, 1982.
20. Mehrotra · J. Vac. Sci. Technol. · 1985 · A3 · 240110.1116/1.572846 ↗
21. Jindal · Surf. Coat. Technol. · 1988 · 36 · 68310.1016/0257-8972(88)90009-6 ↗
22. Burnett · Thin Solid Films · 1987 · 154 · 40310.1016/0040-6090(87)90382-8 ↗
23. Burnett · Thin Solid Films · 1987 · 157 · 23310.1016/0040-6090(88)90006-5 ↗
24. Sekler · Surf. Coat. Technol. · 1988 · 36 · 51910.1016/0257-8972(88)90179-X ↗
25. Milošev · Surf. Sci. Spectra · 1998 · 5 · 14510.1116/1.1247863 ↗
26. Panjan · Vacuum · 1999 · 53 · 12710.1016/S0042-207X(98)00407-2 ↗