journal article·2018-12

Structural and chemical changes of cellulose fibres under low energy ion implantations

Jérôme Leveneur, Alina Rajan, John McDonald-Wharry, Marie-Joo Le Guen, Kim Pickering, John Kennedy

Publisher page

Abstract

Abstract The structural and chemical changes occurring during low energy ion implantation of Argon Nitrogen and Oxygen in cellulose materials are reported. The samples were treated to three different ions at various fluences and energies. The ion beam modification of the samples showed significant structural and chemical changes at the surface as investigated with scanning electron microscopy and Raman spectroscopy. Results found a threshold and beyond this threshold various microscopic changes were seen at surface including discoloration, pitting and fusing of fibres. These changes were consistent with ion beam damage of the polymer chain and later show molecular changes consistent with mild pyrolysis of the fibres. However, the calculated temperature rise from the implantation process is insufficient to explain such pyrolysis to occur. A mechanism is proposed for the observed structural and chemical changes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Ion-surface interactions and analysis · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Modification of cellulosic fibres with functionalised silanes: development of surface properties10.1016/S0143-7496(03)00099-X ↗
2. A review of recent developments in natural fibre composites and their mechanical performance10.1016/j.compositesa.2015.08.038 ↗
3. Composites reinforced with cellulose based fibres10.1016/S0079-6700(98)00018-5 ↗
4. 3D printing of polymer matrix composites: a review and prospective10.1016/j.compositesb.2016.11.034 ↗
5. Thermoplastics reinforced with wood fillers: a literature review10.1080/03602559808001373 ↗
6. Microfibrillated cellulose and new nanocomposite materials: a review10.1007/s10570-010-9405-y ↗
7. Recent developments on nanocellulose reinforced polymer nanocomposites: a review
8. Surface modification of cellulose fibres10.1590/S0104-14282005000200010 ↗
9. The surface modification of cellulose fibres for use as reinforcing elements in composite materials10.1163/1568554053542188 ↗
10. Nu · 2015 · 224
11. Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites10.1016/S0266-3538(00)00168-8 ↗
12. Modification of cellulosic fibers by UV-irradiation. Part II: after treatments effects10.1016/j.ijbiomac.2012.07.001 ↗
13. Micro-Raman study of the carbonization of polyimide induced by swift heavy ion irradiations10.1016/S0168-583X(02)00669-9 ↗
14. Ion-beam-induced conductivity in polymer-films10.1063/1.332471 ↗
15. Study of surface activation of PET by low energy (keV) Ni(+) and N(+) ion implantation10.1016/j.nimb.2008.07.026 ↗
16. Ion-beam modification of polymeric materials–fundamental principles and applications10.1016/S0168-583X(99)00129-9 ↗
17. Ion beam effects in polymer films: structure evolution of the implanted layer10.1016/S0168-583X(97)00208-5 ↗
18. Group-IV and V ion implantation into nanomaterials and elemental analysis on the nanometre scale10.1504/IJNT.2009.022926 ↗
19. SRIM–the stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
20. The art, science, and technology of charcoal production10.1021/ie0207919 ↗
21. High temperature ion implantation evaluation in silicon & germanium10.1063/1.3548346 ↗
22. Anomalous distribution of as during implantation in silicon under self-annealing conditions10.1063/1.344174 ↗
23. Formation of Al-nitride films at room temperature by nitrogen ion implantation into aluminum10.1063/1.329474 ↗
24. Ion implantation of silicon and germanium at room temperature. Analysis by means of 1.0-MeV helium ion scattering10.1139/p68-082 ↗
25. Room temperature diamond-like carbon coatings produced by low energy ion implantation10.1016/j.nimb.2013.11.026 ↗
26. Formation of silver nanoparticles in soda–lime silicate glass by ion implantation near room temperature10.1016/S0022-3093(99)00561-X ↗
27. Stress and plastic flow in silicon during amorphization by ion bombardment10.1063/1.349247 ↗
28. Thermodynamic properties of plant biomass components. Heat capacity, combustion energy, and gasification equilibria of cellulose10.1021/je200270t ↗
29. Maniatis · 2001
30. Numerical model to quantify the influence of the cellulosic substrate on the ignition propensity tests
31. Transport model with radiative heat transfer for rapid cellulose pyrolysis10.1021/ie00082a007 ↗
32. Kinetics of cellulose pyrolysis in nitrogen and steam10.1080/00102208008946927 ↗
33. A review on pyrolysis of biomass constituents: mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin10.1016/j.rser.2014.06.013 ↗
34. IR studies of carbons—II: the vacuum pyrolysis of cellulose10.1016/0008-6223(83)90092-1 ↗
35. Vacuum pyrolysis of cellulose: Fourier transform infrared characterization of solid residues, product distribution and correlations10.1016/0165-2370(91)80036-8 ↗
36. Improved surface-properties of polymer materials by multiple ion-beam treatment10.1557/JMR.1991.0610 ↗
37. Ion beam induced enhanced adhesion of Au films deposited on polytetrafluoroethylene10.1016/S0040-6090(02)00839-8 ↗
38. Ion-beam-induced carbonization of partially cured phenolic resin10.1016/0168-583X(94)96290-1 ↗
39. A comparison of the charring and carbonisation of oxygen-rich precursors with the thermal reduction of graphene oxide10.1080/14786435.2015.1108525 ↗
40. Torrefaction and co-torrefaction characterization of hemicellulose, cellulose and lignin as well as torrefaction of some basic constituents in biomass10.1016/j.energy.2010.12.036 ↗
41. Estimation of cellulose crystallinity of lignocelluloses using near-IR FT-Raman spectroscopy and comparison of the Raman and Segal-WAXS methods10.1021/jf304465k ↗
42. Determination of the stiffness of cellulose nanowhiskers and the fiber-matrix interface in a nanocomposite using Raman spectroscopy10.1063/1.2963491 ↗
43. NIR FT Raman spectroscopy - a rapid analytical tool for detecting the transformation of cellulose polymorphs10.1023/A:1016616920539 ↗
44. FT Raman spectroscopic investigation of cellulose acetate10.1007/s10570-011-9545-8 ↗
45. Carbonisation of biomass-derived chars and the thermal reduction of a graphene oxide sample studied using Raman spectroscopy10.1016/j.carbon.2013.03.033 ↗
46. Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond10.1098/rsta.2004.1452 ↗
47. Thermal effects in cellulose pyrolysis: relationship to char formation processes10.1021/ie950438l ↗
48. FT-IR and FT-Raman study of hydrothermally degradated cellulose10.1016/S0022-2860(01)00706-2 ↗
49. Effect of low energy ion beam implantation on the microstructure of cellulose10.1016/j.radphyschem.2011.04.015 ↗
50. Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites10.1016/S0266-3538(00)00168-8 ↗
51. Chemical modifications of PET induced by swift heavy ions10.1016/S0168-583X(97)00364-9 ↗
52. Role of ion beam induced solid flow in surface patterning of Si (100) using Ar ion beam irradiation10.1016/j.apsusc.2013.06.124 ↗
53. Melting cellulose10.1007/s10570-004-0344-3 ↗