New diamond coating with finely crystallized smooth surface for the tools to achieve fine surface finish of non-ferrous metals
Source abstract
Abstract
In spite of many significant advantages of diamond coated cutting tools, rough surface with large crystal grains prevented them from usage for finishing process. In this study, a new smooth diamond coating with finely crystallized diamond on the surface was developed, whose roughness is less than 1 μm. Endmills with this coating was subjected to cutting tests for the performance of finishing non-ferrous alloys. Roughness of finished workpiece surface was less than 1 μm maximum value, which was as small as that could be achieved by using non-coated cemented carbide endmills. Anti-wear property and durability were not spoiled by these changes in coating morphologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. Yoshikawa · Diamond Films Technol. · 1991 · 1 · 1
2. S. Saito, M. Yoshikawa et al., Advances in New Diamond Science and Technology, Proceedings of Fourth International Conference on New Diamond Science and Technology. MYU, Tokyo, (1994) 783
3. Fretty · Cutting Tool Eng. · 2001 · 53 · 38
4. M.A. Perlas, et al., Handbook of Industrial Diamonds and Diamond Films, Marcel Dekker Inc, (1998) 35